From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kapil Hali Subject: [PATCH v6 1/5] dt-bindings: add SMP enable-method for Broadcom NSP Date: Sat, 5 Dec 2015 06:53:40 -0500 Message-ID: <1449316424-14549-2-git-send-email-kapilh@broadcom.com> References: <1449316424-14549-1-git-send-email-kapilh@broadcom.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1449316424-14549-1-git-send-email-kapilh@broadcom.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , Ray Jui , Scott Branden , Jon Mason , Florian Fainelli Cc: devicetree@vger.kernel.org, Paul Walmsley , Hauke Mehrtens , Linus Walleij , Lee Jones , Kever Yang , linux-kernel@vger.kernel.org, Chen-Yu Tsai , bcm-kernel-feedback-list@broadcom.com, Gregory Fong , Olof Johansson , Maxime Ripard , Kapil Hali , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's Northstar Plus CPU to the 32-bit ARM CPU device tree binding documentation file and create a new binding documentation for Northstar Plus CPU. Signed-off-by: Kapil Hali --- .../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 39 ++++++++++++++++++++++ Documentation/devicetree/bindings/arm/cpus.txt | 1 + 2 files changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt new file mode 100644 index 0000000..677ef9d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt @@ -0,0 +1,39 @@ +Broadcom Northstar Plus SoC CPU Enable Method +--------------------------------------------- +This binding defines the enable method used for starting secondary +CPU in the following Broadcom SoCs: + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 + +The enable method is specified by defining the following required +properties in the corresponding secondary "cpu" device tree node: + - enable-method = "brcm,bcm-nsp-smp"; + - secondary-boot-reg = <...>; + +The secondary-boot-reg property is a u32 value that specifies the +physical address of the register which should hold the common +entry point for a secondary CPU. This entry is cpu node specific +and should be added per cpu. E.g., in case of NSP (BCM58625) which +is a dual core CPU SoC, this entry should be added to cpu1 node. + + +Example: + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + enable-method = "brcm,bcm-nsp-smp"; + secondary-boot-reg = <0xffff042c>; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 3a07a87..d191554 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -190,6 +190,7 @@ nodes to be present and contain the properties described below. "allwinner,sun6i-a31" "allwinner,sun8i-a23" "arm,psci" + "brcm,bcm-nsp-smp" "brcm,brahma-b15" "marvell,armada-375-smp" "marvell,armada-380-smp" -- 2.1.0