From: Ilya Ledvich <ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Igor Grinberg <grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>,
Ilya Ledvich <ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
Subject: [PATCH 1/8] ARM: dts: imx7d: cl-som-imx7: add basic module support
Date: Mon, 7 Dec 2015 09:14:32 +0200 [thread overview]
Message-ID: <1449472479-2521-2-git-send-email-ilya@compulab.co.il> (raw)
In-Reply-To: <1449472479-2521-1-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on
Freescale i.MX7 System-on-Chip family.
http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/
Add basic DT support for standalone module (without a carrier board):
* Memory configuration
* I2C2 bus
* PMIC
* UART1
Signed-off-by: Ilya Ledvich <ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
Acked-by: Igor Grinberg <grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
---
Documentation/devicetree/bindings/arm/fsl.txt | 4 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 150 ++++++++++++++++++++++++++
3 files changed, 155 insertions(+)
create mode 100644 arch/arm/boot/dts/imx7d-cl-som-imx7.dts
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index 34c88b0..30b0ba1 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -53,6 +53,10 @@ i.MX6 Quad SABRE Automotive Board
Required root node properties:
- compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+i.MX7D CL-SOM-iMX7 Board
+Required root node properties:
+ - compatible = "compulab,cl-som-imx7", "fsl,imx7d";
+
Generic i.MX boards
-------------------
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 30bbc37..83ed521 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -350,6 +350,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
+ imx7d-cl-som-imx7.dtb \
imx7d-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-qds.dtb \
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
new file mode 100644
index 0000000..6fa6580
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -0,0 +1,150 @@
+/*
+ * Support for CompuLab CL-SOM-iMX7 System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7d.dtsi"
+
+/ {
+ model = "CompuLab CL-SOM-iMX7";
+ compatible = "compulab,cl-som-imx7", "fsl,imx7d";
+
+ memory {
+ reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
+ };
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic: pfuze3000@08 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ status = "okay";
+};
+
+&iomuxc {
+ cl-som-imx7 {
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
+ >;
+ };
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-12-07 7:14 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-07 7:14 [PATCH 0/8] Add support for CL-SOM-iMX7 and SBC-iMX7 Ilya Ledvich
[not found] ` <1449472479-2521-1-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
2015-12-07 7:14 ` Ilya Ledvich [this message]
[not found] ` <1449472479-2521-2-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
2015-12-08 15:14 ` [PATCH 1/8] ARM: dts: imx7d: cl-som-imx7: add basic module support Rob Herring
2015-12-10 14:01 ` [PATCH v2] " Igor Grinberg
[not found] ` <1449756097-2921-1-git-send-email-grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
2015-12-14 2:43 ` Shawn Guo
2015-12-16 14:01 ` Igor Grinberg
[not found] ` <56716EA4.2080107-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
2015-12-21 6:36 ` Shawn Guo
2015-12-21 8:07 ` Igor Grinberg
[not found] ` <5677B341.6040203-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
2015-12-21 13:54 ` Shawn Guo
2015-12-21 13:59 ` Shawn Guo
2015-12-22 7:38 ` Igor Grinberg
2015-12-07 7:14 ` [PATCH 2/8] ARM: dts: imx7d: cl-som-imx7: add usb otg support Ilya Ledvich
2015-12-07 7:14 ` [PATCH 3/8] ARM: dts: imx7d: cl-som-imx7: add eMMC support Ilya Ledvich
2015-12-07 7:14 ` [PATCH 4/8] ARM: dts: imx7d: cl-som-imx7: add fec1 support Ilya Ledvich
2015-12-07 7:14 ` [PATCH 5/8] ARM: dts: imx7d: cl-som-imx7: add eeprom support Ilya Ledvich
2015-12-07 7:14 ` [PATCH 6/8] ARM: dts: imx7d: cl-som-imx7: add gpio extender support Ilya Ledvich
2015-12-07 7:14 ` [PATCH 7/8] ARM: dts: imx7d: cl-som-imx7: add fec2 support Ilya Ledvich
2015-12-07 7:14 ` [PATCH 8/8] ARM: dts: imx7d: sbc-imx7: add basic board support Ilya Ledvich
[not found] ` <1449472479-2521-9-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
2015-12-08 15:16 ` Rob Herring
2015-12-14 2:47 ` [PATCH 0/8] Add support for CL-SOM-iMX7 and SBC-iMX7 Shawn Guo
2015-12-16 14:09 ` Igor Grinberg
[not found] ` <5671707E.5000908-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
2015-12-21 6:41 ` Shawn Guo
2015-12-21 7:54 ` Igor Grinberg
2015-12-22 8:15 ` [PATCH v2 0/2] " Ilya Ledvich
[not found] ` <1450772120-18131-1-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
2015-12-22 8:15 ` [PATCH v2 1/2] ARM: dts: imx7d: cl-som-imx7: add basic module support Ilya Ledvich
[not found] ` <1450772120-18131-2-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
2015-12-22 12:17 ` Shawn Guo
2015-12-22 14:07 ` Igor Grinberg
2015-12-22 8:15 ` [PATCH v2 2/2] ARM: dts: imx7d: sbc-imx7: add basic board support Ilya Ledvich
[not found] ` <1450772120-18131-3-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
2015-12-22 12:19 ` Shawn Guo
2015-12-22 14:13 ` Igor Grinberg
2015-12-22 12:13 ` [PATCH v2 0/2] Add support for CL-SOM-iMX7 and SBC-iMX7 Shawn Guo
2015-12-22 14:14 ` Igor Grinberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449472479-2521-2-git-send-email-ilya@compulab.co.il \
--to=ilya-utxizqzc01rs1mouv/rt9w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).