From: Phil Reid <preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
peppe.cavallaro-qxv4g6HH51o@public.gmane.org,
davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org,
vbridger-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Phil Reid <preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
Subject: [PATCH v3 4/4] stmmac: socfpga: Provide dt node to config ptp clk source.
Date: Tue, 8 Dec 2015 13:13:02 +0800 [thread overview]
Message-ID: <1449551582-6599-5-git-send-email-preid@electromag.com.au> (raw)
In-Reply-To: <1449551582-6599-1-git-send-email-preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
Provides an options to use the ptp clock routed from the Altera FPGA
fabric. Instead of the defalt eosc1 clock connected to the ARM HPS core.
This setting affects all emacs in the core as the ptp clock is common.
Signed-off-by: Phil Reid <preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
---
Documentation/devicetree/bindings/net/socfpga-dwmac.txt | 2 ++
drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 9 +++++++++
2 files changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
index 3a9d679..72d82d6 100644
--- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
@@ -11,6 +11,8 @@ Required properties:
designware version numbers documented in stmmac.txt
- altr,sysmgr-syscon : Should be the phandle to the system manager node that
encompasses the glue register, the register offset, and the register shift.
+ - altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock
+ for ptp ref clk. This affects all emacs as the clock is common.
Optional properties:
altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 401383b..f0d797a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -32,6 +32,7 @@
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
#define SYSMGR_EMACGRP_CTRL_PHYSEL_WIDTH 2
#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x00000003
+#define SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK 0x00000010
#define EMAC_SPLITTER_CTRL_REG 0x0
#define EMAC_SPLITTER_CTRL_SPEED_MASK 0x3
@@ -47,6 +48,7 @@ struct socfpga_dwmac {
struct regmap *sys_mgr_base_addr;
struct reset_control *stmmac_rst;
void __iomem *splitter_base;
+ bool f2h_ptp_ref_clk;
};
static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed)
@@ -116,6 +118,8 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *
return -EINVAL;
}
+ dwmac->f2h_ptp_ref_clk = of_property_read_bool(np, "altr,f2h_ptp_ref_clk");
+
np_splitter = of_parse_phandle(np, "altr,emac-splitter", 0);
if (np_splitter) {
if (of_address_to_resource(np_splitter, 0, &res_splitter)) {
@@ -171,6 +175,11 @@ static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac)
ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
ctrl |= val << reg_shift;
+ if (dwmac->f2h_ptp_ref_clk)
+ ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
+ else
+ ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2));
+
regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
return 0;
}
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-12-08 5:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-08 5:12 [PATCH v3 0/4] stmmac: Fixed Phy & PTP fixes Phil Reid
2015-12-08 5:12 ` [PATCH v3 1/4] stmmac: create of compatible mdio bus for stmacc driver Phil Reid
2015-12-08 9:35 ` Arnd Bergmann
2015-12-08 10:53 ` Tobias Klauser
2015-12-08 5:13 ` [PATCH v3 2/4] stmmac: Correct documentation on stmmac clocks Phil Reid
[not found] ` <1449551582-6599-1-git-send-email-preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
2015-12-08 5:13 ` [PATCH v3 3/4] stmmac: Fix calculations for ptp counters when clock input = 50Mhz Phil Reid
2015-12-08 5:13 ` Phil Reid [this message]
2015-12-09 3:24 ` [PATCH v3 4/4] stmmac: socfpga: Provide dt node to config ptp clk source Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449551582-6599-5-git-send-email-preid@electromag.com.au \
--to=preid-qgqnfa1juf/o2in0hyhwsidd74u8msao@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=peppe.cavallaro-qxv4g6HH51o@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=vbridger-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).