From mboxrd@z Thu Jan 1 00:00:00 1970 From: Philipp Zabel Subject: Re: [PATCH v3 1/2] Documentation: devicetree: add epson rx6110 binding Date: Tue, 08 Dec 2015 11:29:47 +0100 Message-ID: <1449570587.18374.0.camel@pengutronix.de> References: <1449568461-26016-1-git-send-email-s.trumtrar@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1449568461-26016-1-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Steffen Trumtrar Cc: Alessandro Zummo , Alexandre Belloni , Mark Rutland , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Pawel Moll , Ian Campbell , Rob Herring , kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, Kumar Gala List-Id: devicetree@vger.kernel.org Am Dienstag, den 08.12.2015, 10:54 +0100 schrieb Steffen Trumtrar: > Add the binding documentation for the Epson RX6110 RTC. > > Acked-by: Rob Herring > Signed-off-by: Steffen Trumtrar Reviewed-by: Philipp Zabel although I'd like a small change to be made below: > --- > Changes since v2: > - removed the size field in i2c binding > > .../devicetree/bindings/rtc/epson,rx6110.txt | 39 ++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/rtc/epson,rx6110.txt > > diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt > new file mode 100644 > index 000000000000..71353542a59d > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt > @@ -0,0 +1,39 @@ > +Epson RX6110 Real Time Clock > +============================ > + > +The Epson RX6110 can be used with SPI or I2C busses. The kind of > +bus depends on the SPISEL pin and can not be configured via software. > + > +I2C mode > +-------- > + > +Required properties: > + - compatible: should be: "epson,rx6110" > + - reg : offset of the register set of the device That should be the I2C address of the device: git grep "reg.*I2C address" Documentation/ regards Philipp -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html