From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: vinod.koul@intel.com, arnd@arndb.de, tony@atomide.com
Cc: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
devicetree@vger.kernel.org, balbi@ti.com,
linux-kernel@vger.kernel.org, nsekhar@ti.com
Subject: [PATCH for 4.4 2/2] dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type
Date: Wed, 9 Dec 2015 10:18:11 +0200 [thread overview]
Message-ID: <1449649091-9848-3-git-send-email-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <1449649091-9848-1-git-send-email-peter.ujfalusi@ti.com>
This change makes the DT file to be easier to read since the reserved slots
array does not need the '/bits/ 16' to be specified, which might confuse
some people.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
Documentation/devicetree/bindings/dma/ti-edma.txt | 5 ++--
drivers/dma/edma.c | 31 ++++++++++++++++++-----
2 files changed, 27 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index ae8b8f1d6e69..079b42a81d7c 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -56,9 +56,8 @@ edma: edma@49000000 {
/* Channel 20 and 21 is allocated for memcpy */
ti,edma-memcpy-channels = <20 21>;
- /* The following PaRAM slots are reserved: 35-45 and 100-110 */
- ti,edma-reserved-slot-ranges = /bits/ 16 <35 10>,
- /bits/ 16 <100 10>;
+ /* The following PaRAM slots are reserved: 35-44 and 100-109 */
+ ti,edma-reserved-slot-ranges = <35 10>, <100 10>;
};
edma_tptc0: tptc@49800000 {
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 89fc17f3a6ff..a0f217349c07 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -2015,31 +2015,50 @@ static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
&sz);
if (prop) {
const char pname[] = "ti,edma-reserved-slot-ranges";
+ u32 (*tmp)[2];
s16 (*rsv_slots)[2];
- size_t nelm = sz / sizeof(*rsv_slots);
+ size_t nelm = sz / sizeof(*tmp);
struct edma_rsv_info *rsv_info;
+ int i;
if (!nelm)
return info;
+ tmp = kcalloc(nelm, sizeof(*tmp), GFP_KERNEL);
+ if (!tmp)
+ return ERR_PTR(-ENOMEM);
+
rsv_info = devm_kzalloc(dev, sizeof(*rsv_info), GFP_KERNEL);
- if (!rsv_info)
+ if (!rsv_info) {
+ kfree(tmp);
return ERR_PTR(-ENOMEM);
+ }
rsv_slots = devm_kcalloc(dev, nelm + 1, sizeof(*rsv_slots),
GFP_KERNEL);
- if (!rsv_slots)
+ if (!rsv_slots) {
+ kfree(tmp);
return ERR_PTR(-ENOMEM);
+ }
- ret = of_property_read_u16_array(dev->of_node, pname,
- (u16 *)rsv_slots, nelm * 2);
- if (ret)
+ ret = of_property_read_u32_array(dev->of_node, pname,
+ (u32 *)tmp, nelm * 2);
+ if (ret) {
+ kfree(tmp);
return ERR_PTR(ret);
+ }
+ for (i = 0; i < nelm; i++) {
+ rsv_slots[i][0] = tmp[i][0];
+ rsv_slots[i][1] = tmp[i][1];
+ }
rsv_slots[nelm][0] = -1;
rsv_slots[nelm][1] = -1;
+
info->rsv = rsv_info;
info->rsv->rsv_slots = (const s16 (*)[2])rsv_slots;
+
+ kfree(tmp);
}
return info;
--
2.6.3
next prev parent reply other threads:[~2015-12-09 8:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-09 8:18 [PATCH for 4.4 0/2] DT/dmaengine: edma: Convert 16bit arrays to 32bit Peter Ujfalusi
2015-12-09 8:18 ` [PATCH for 4.4 1/2] dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type Peter Ujfalusi
2015-12-09 20:02 ` Rob Herring
2015-12-09 20:06 ` Rob Herring
2015-12-09 8:18 ` Peter Ujfalusi [this message]
2015-12-09 20:08 ` [PATCH for 4.4 2/2] dmaengine: edma: DT: Change reserved slot " Rob Herring
2015-12-09 9:00 ` [PATCH for 4.4 0/2] DT/dmaengine: edma: Convert 16bit arrays to 32bit Arnd Bergmann
[not found] ` <1449649091-9848-1-git-send-email-peter.ujfalusi-l0cyMroinI0@public.gmane.org>
2015-12-09 20:12 ` Tony Lindgren
[not found] ` <20151209201226.GB23396-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-12-10 3:04 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449649091-9848-3-git-send-email-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=arnd@arndb.de \
--cc=balbi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=tony@atomide.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).