[PATCH v3 5/7] ARM: debug: add hi3519 debug uart

[Jiancheng Xue <xuejiancheng-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>]

add hi3519 debug uart.

Signed-off-by: Jiancheng Xue <xuejiancheng-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 arch/arm/Kconfig.debug | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 259c0ca..29af057 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -270,6 +270,14 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the 8250 at PCI COM1.
 
+	config DEBUG_HI3519_UART
+		bool "Hisilicon Hi3519 Debug UART"
+		depends on ARCH_HISI
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on HI3519 UART.
+
 	config DEBUG_HI3620_UART
 		bool "Hisilicon HI3620 Debug UART"
 		depends on ARCH_HI3xxx
@@ -1449,6 +1457,7 @@ config DEBUG_UART_PHYS
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8b00000 if DEBUG_HIX5HD2_UART
 	default 0xf991e000 if DEBUG_QCOM_UARTDM
+	default 0x12100000 if DEBUG_HI3519_UART
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default 0xfe800000 if ARCH_IOP32X
@@ -1529,6 +1538,7 @@ config DEBUG_UART_VIRT
 	default 0xfe230000 if DEBUG_PICOXCELL_UART
 	default 0xfe300000 if DEBUG_BCM_KONA_UART
 	default 0xfe800000 if ARCH_IOP32X
+	default 0xfef00000 if DEBUG_HI3519_UART
 	default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
 	default 0xfeb24000 if DEBUG_RK3X_UART0
 	default 0xfeb26000 if DEBUG_RK3X_UART1
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html