* [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp
@ 2015-12-11 10:45 Bai Ping
2015-12-11 10:45 ` [PATCH 2/3] clk: imx: Add clock " Bai Ping
` (3 more replies)
0 siblings, 4 replies; 7+ messages in thread
From: Bai Ping @ 2015-12-11 10:45 UTC (permalink / raw)
To: shawnguo, kernel
Cc: devicetree, pawel.moll, mturquette, sboyd, robh+dt, linux-clk,
linux-arm-kernel
The i.MX6Qual Plus processor is an high performance SOC of i.MX6 family.
It has enhanced graphics performance and increased overall memory bandwidth
compared to i.MX6Q. Most of the design are same as i.MX6Qual/Dual, so code
for i.MX6Qual can be resued by this chip. The revision number is identied as
i.MX6Q Rev2.0, but actually it is a new chip, as we did many change to the
overall architecture.
This patch adds basic dts file for the new i.MX6Qual Plus processor.
Signed-off-by: Bai Ping <b51503@freescale.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx6q.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 1 +
arch/arm/boot/dts/imx6qp-sabreauto.dts | 67 +++++++++++++
arch/arm/boot/dts/imx6qp-sabresd.dts | 59 +++++++++++
arch/arm/boot/dts/imx6qp.dtsi | 157 ++++++++++++++++++++++++++++++
include/dt-bindings/clock/imx6qdl-clock.h | 16 ++-
7 files changed, 302 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6qp-sabreauto.dts
create mode 100644 arch/arm/boot/dts/imx6qp-sabresd.dts
create mode 100644 arch/arm/boot/dts/imx6qp.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0fe130e..ab8efbd 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -302,6 +302,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-sabreauto.dtb \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
+ imx6qp-sabresd.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6u-801x.dtb \
imx6dl-tx6u-811x.dtb \
@@ -328,6 +329,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-phytec-pbab01.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
+ imx6qp-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
imx6q-sbc6x.dtb \
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 399103b..c4efd9a 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -21,7 +21,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index a6d445c..f65f57b 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -238,6 +238,7 @@
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
+ regulator-ramp-delay = <6250>;
};
sw3a_reg: sw3a {
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
new file mode 100644
index 0000000..b24aae6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "imx6q-sabreauto.dts"
+#include "imx6qp.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
+ compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+};
+
+
+&fec {
+ pinctrl-assert-gpios = <&max7322 0 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c2 {
+ max7322: gpio@68 {
+ compatible = "maxim,max7322";
+ reg = <0x68>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&iomuxc {
+ imx6qdl-sabreauto {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b018
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b018
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b018
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b018
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b018
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b018
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b018
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b018
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b018
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b018
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b018
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b018
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+ };
+};
+
+&pcie {
+ reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&vgen3_reg {
+ regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
new file mode 100644
index 0000000..c3ab2b6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "imx6q-sabresd.dts"
+#include "imx6qp.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
+ compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+};
+
+&cpu0 {
+ arm-supply = <&sw2_reg>;
+};
+
+&iomuxc {
+ imx6qdl-sabresd {
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
+ MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
+ MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
+ MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+ };
+};
+
+&pcie {
+ power-on-gpio = <&gpio3 19 0>;
+ reset-gpio = <&gpio7 12 0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
new file mode 100644
index 0000000..e43751f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -0,0 +1,157 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/ {
+ aliases {
+ pre0 = &pre1;
+ pre1 = &pre2;
+ pre2 = &pre3;
+ pre3 = &pre4;
+ prg0 = &prg1;
+ prg1 = &prg2;
+ };
+
+ soc {
+ ocram_2: sram@00940000 {
+ compatible = "mmio-sram";
+ reg = <0x00940000 0x20000>;
+ clocks = <&clks IMX6QDL_CLK_OCRAM>;
+ };
+
+ ocram_3: sram@00960000 {
+ compatible = "mmio-sram";
+ reg = <0x00960000 0x20000>;
+ clocks = <&clks IMX6QDL_CLK_OCRAM>;
+ };
+
+ pcie: pcie@0x01000000 {
+ compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
+ reg = <0x01ffc000 0x4000>, <0x01f00000 0x80000>;
+ reg-names = "dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+ num-lanes = <1>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_PCIE_REF_125M>,
+ <&clks IMX6QDL_CLK_SATA_REF_100M>,
+ <&clks IMX6QDL_CLK_LVDS1_GATE>, <&clks IMX6QDL_CLK_PCIE_AXI>;
+ clock-names = "pcie_phy", "ref_100m", "pcie_bus", "pcie";
+ status = "disabled";
+ };
+
+ aips-bus@02100000 { /* AIPS2 */
+ pre1: pre@021c8000 {
+ compatible = "fsl,imx6q-pre";
+ reg = <0x021c8000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRE0>;
+ interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
+ ocram = <&ocram_2>;
+ status = "disabled";
+ };
+
+ pre2: pre@021c9000 {
+ compatible = "fsl,imx6q-pre";
+ reg = <0x021c9000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRE1>;
+ interrupts = <0 97 IRQ_TYPE_EDGE_RISING>;
+ ocram = <&ocram_2>;
+ status = "disabled";
+ };
+
+ pre3: pre@021ca000 {
+ compatible = "fsl,imx6q-pre";
+ reg = <0x021ca000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRE2>;
+ interrupts = <0 98 IRQ_TYPE_EDGE_RISING>;
+ ocram = <&ocram_3>;
+ status = "disabled";
+ };
+
+ pre4: pre@021cb000 {
+ compatible = "fsl,imx6q-pre";
+ reg = <0x021cb000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRE3>;
+ interrupts = <0 99 IRQ_TYPE_EDGE_RISING>;
+ ocram = <&ocram_3>;
+ status = "disabled";
+ };
+
+ prg1: prg@021cc000 {
+ compatible = "fsl,imx6q-prg";
+ reg = <0x021cc000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRG0_AXI>,
+ <&clks IMX6QDL_CLK_PRG0_APB>;
+ clock-names = "axi", "apb";
+ gpr = <&gpr>;
+ status = "disabled";
+ };
+
+ prg2: prg@021cd000 {
+ compatible = "fsl,imx6q-prg";
+ reg = <0x021cd000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRG1_AXI>,
+ <&clks IMX6QDL_CLK_PRG1_APB>;
+ clock-names = "axi", "apb";
+ gpr = <&gpr>;
+ status = "disabled";
+ };
+ };
+
+ ipu1: ipu@02400000 {
+ compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+ clocks = <&clks IMX6QDL_CLK_IPU1>,
+ <&clks IMX6QDL_CLK_IPU1_DI0>, <&clks IMX6QDL_CLK_IPU1_DI1>,
+ <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
+ <&clks IMX6QDL_CLK_PRG0_APB>;
+ clock-names = "bus",
+ "di0", "di1",
+ "di0_sel", "di1_sel",
+ "ldb_di0", "ldb_di1", "prg";
+ };
+
+ ipu2: ipu@02800000 {
+ compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+ clocks = <&clks IMX6QDL_CLK_IPU2>,
+ <&clks IMX6QDL_CLK_IPU2_DI0>, <&clks IMX6QDL_CLK_IPU2_DI1>,
+ <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
+ <&clks IMX6QDL_CLK_PRG1_APB>;
+ clock-names = "bus",
+ "di0", "di1",
+ "di0_sel", "di1_sel",
+ "ldb_di0", "ldb_di1", "prg";
+ };
+
+ sata: sata@02200000 {
+ compatible = "fsl,imx6qp-ahci";
+ reg = <0x02200000 0x4000>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_SATA>,
+ <&clks IMX6QDL_CLK_SATA_REF_100M>,
+ <&clks IMX6QDL_CLK_AHB>;
+ clock-names = "sata", "sata_ref", "ahb";
+ status = "disabled";
+ };
+ };
+};
+
+&ldb {
+ compatible = "fsl,imx6qp-ldb", "fsl,imx6q-ldb", "fsl,imx53-ldb";
+};
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
index 77985cc..2905033 100644
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -255,6 +255,20 @@
#define IMX6QDL_CLK_CAAM_ACLK 242
#define IMX6QDL_CLK_CAAM_IPG 243
#define IMX6QDL_CLK_SPDIF_GCLK 244
-#define IMX6QDL_CLK_END 245
+#define IMX6QDL_CLK_UART_SEL 245
+#define IMX6QDL_CLK_IPG_PER_SEL 246
+#define IMX6QDL_CLK_ECSPI_SEL 247
+#define IMX6QDL_CLK_CAN_SEL 248
+#define IMX6QDL_CLK_MMDC_CH1_AXI_CG 249
+#define IMX6QDL_CLK_PRE0 250
+#define IMX6QDL_CLK_PRE1 251
+#define IMX6QDL_CLK_PRE2 252
+#define IMX6QDL_CLK_PRE3 253
+#define IMX6QDL_CLK_PRG0_AXI 254
+#define IMX6QDL_CLK_PRG1_AXI 255
+#define IMX6QDL_CLK_PRG0_APB 256
+#define IMX6QDL_CLK_PRG1_APB 257
+#define IMX6QDL_CLK_PRE_AXI 258
+#define IMX6QDL_CLK_END 259
#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/3] clk: imx: Add clock support for imx6qp
2015-12-11 10:45 [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp Bai Ping
@ 2015-12-11 10:45 ` Bai Ping
2015-12-11 10:45 ` [PATCH 3/3] ARM: imx: Identify imx6q rev2.0 as imx6qp Bai Ping
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Bai Ping @ 2015-12-11 10:45 UTC (permalink / raw)
To: shawnguo, kernel
Cc: devicetree, pawel.moll, mturquette, sboyd, robh+dt, linux-clk,
linux-arm-kernel
most of the clock tree structures on i.MX6QP are same as
on i.MX6Q. there still some difference between these two
SOCs. Compared to the i.MX6Q, the differences of clocks on
i.MX6QP is mainly on:
1. UART clk root
2. IPG_PER clk,
3. ENFC
4. ECSPI
5. CAN_SEL
6. CSCMR1 register fixup issue
7. LDB clock
8. GPU2D clock
9 MMDC_CH1_AXI gate ...
Signed-off-by: Bai Ping <b51503@freescale.com>
---
drivers/clk/imx/clk-imx6q.c | 132 +++++++++++++++++++++++++++++++++++---------
1 file changed, 105 insertions(+), 27 deletions(-)
diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index f0efc6f..02e1818 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -34,7 +34,9 @@ static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
static const char *gpu_axi_sels[] = { "axi", "ahb", };
+static const char *pre_axi_sels[] = { "axi", "ahb", };
static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
+static const char *gpu2d_core_sels_2[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m",};
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", };
static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
@@ -44,15 +46,24 @@ static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di
static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu1_di0_sels_2[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0_podf", "ldb_di1_podf", };
+static const char *ipu1_di1_sels_2[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0_podf", "ldb_di1_podf", };
+static const char *ipu2_di0_sels_2[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0_podf", "ldb_di1_podf", };
+static const char *ipu2_di1_sels_2[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0_podf", "ldb_di1_podf", };
static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", };
static const char *pcie_axi_sels[] = { "axi", "ahb", };
static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", };
static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
+static const char *enfc_sels_2[] = {"pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", };
static const char *eim_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
static const char *eim_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *vdo_axi_sels[] = { "axi", "ahb", };
static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *uart_sels[] = { "pll3_80m", "osc", };
+static const char *ipg_per_sels[] = { "ipg", "osc", };
+static const char *ecspi_sels[] = { "pll3_60m", "osc", };
+static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", };
static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
"ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", };
@@ -121,12 +132,19 @@ static unsigned int share_count_ssi2;
static unsigned int share_count_ssi3;
static unsigned int share_count_mipi_core_cfg;
static unsigned int share_count_spdif;
+static unsigned int share_count_prg0;
+static unsigned int share_count_prg1;
static inline int clk_on_imx6q(void)
{
return of_machine_is_compatible("fsl,imx6q");
}
+static inline int clk_on_imx6qp(void)
+{
+ return of_machine_is_compatible("fsl,imx6qp");
+}
+
static inline int clk_on_imx6dl(void)
{
return of_machine_is_compatible("fsl,imx6dl");
@@ -265,7 +283,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
clk[IMX6QDL_CLK_VIDEO_27M] = imx_clk_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20);
- if (clk_on_imx6dl()) {
+ if (clk_on_imx6dl() || clk_on_imx6qp()) {
clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1);
clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1);
}
@@ -294,7 +312,15 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
}
- clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
+ if (clk_on_imx6qp()) {
+ clk[IMX6QDL_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels));
+ clk[IMX6QDL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
+ clk[IMX6QDL_CLK_IPG_PER_SEL] = imx_clk_mux("ipg_per_sel", base + 0x1c, 6, 1, ipg_per_sels, ARRAY_SIZE(ipg_per_sels));
+ clk[IMX6QDL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
+ clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels_2, ARRAY_SIZE(gpu2d_core_sels_2));
+ } else {
+ clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
+ }
clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels));
clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
clk[IMX6QDL_CLK_IPU1_SEL] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
@@ -305,22 +331,40 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_IPU1_DI0_SEL] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_IPU1_DI1_SEL] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_IPU2_DI0_SEL] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_IPU2_DI1_SEL] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
clk[IMX6QDL_CLK_HSI_TX_SEL] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
clk[IMX6QDL_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
- clk[IMX6QDL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
- clk[IMX6QDL_CLK_EIM_SEL] = imx_clk_fixup_mux("eim_sel", base + 0x1c, 27, 2, eim_sels, ARRAY_SIZE(eim_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_EIM_SLOW_SEL] = imx_clk_fixup_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels), imx_cscmr1_fixup);
+ if (clk_on_imx6qp()) {
+ clk[IMX6QDL_CLK_IPU1_DI0_SEL] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels_2, ARRAY_SIZE(ipu1_di0_sels_2), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI1_SEL] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels_2, ARRAY_SIZE(ipu1_di1_sels_2), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI0_SEL] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels_2, ARRAY_SIZE(ipu2_di0_sels_2), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI1_SEL] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels_2, ARRAY_SIZE(ipu2_di1_sels_2), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clk[IMX6QDL_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clk[IMX6QDL_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clk[IMX6QDL_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[IMX6QDL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 15, 3, enfc_sels_2, ARRAY_SIZE(enfc_sels_2));
+ clk[IMX6QDL_CLK_EIM_SEL] = imx_clk_mux("eim_sel", base + 0x1c, 27, 2, eim_sels, ARRAY_SIZE(eim_sels));
+ clk[IMX6QDL_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels));
+ clk[IMX6QDL_CLK_PRE_AXI] = imx_clk_mux("pre_axi", base + 0x18, 1, 1, pre_axi_sels, ARRAY_SIZE(pre_axi_sels));
+ } else {
+ clk[IMX6QDL_CLK_IPU1_DI0_SEL] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI1_SEL] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI0_SEL] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI1_SEL] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
+ clk[IMX6QDL_CLK_EIM_SEL] = imx_clk_fixup_mux("eim_sel", base + 0x1c, 27, 2, eim_sels, ARRAY_SIZE(eim_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EIM_SLOW_SEL] = imx_clk_fixup_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels), imx_cscmr1_fixup);
+ }
clk[IMX6QDL_CLK_VDO_AXI_SEL] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
clk[IMX6QDL_CLK_VPU_AXI_SEL] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
clk[IMX6QDL_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
@@ -335,23 +379,33 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
clk[IMX6QDL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
clk[IMX6QDL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
- clk[IMX6QDL_CLK_IPG_PER] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup);
clk[IMX6QDL_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
clk[IMX6QDL_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
clk[IMX6QDL_CLK_ASRC_PRED] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3);
clk[IMX6QDL_CLK_ASRC_PODF] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3);
clk[IMX6QDL_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
clk[IMX6QDL_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
- clk[IMX6QDL_CLK_CAN_ROOT] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6);
- clk[IMX6QDL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
+ if (clk_on_imx6qp()) {
+ clk[IMX6QDL_CLK_IPG_PER] = imx_clk_divider("ipg_per", "ipg_per_sel", base + 0x1c, 0, 6);
+ clk[IMX6QDL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "ecspi_sel", base + 0x38, 19, 6);
+ clk[IMX6QDL_CLK_CAN_ROOT] = imx_clk_divider("can_root", "can_sel", base + 0x20, 2, 6);
+ clk[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_divider("uart_serial_podf", "uart_sel", base + 0x24, 0, 6);
+ clk[IMX6QDL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0", 2, 7);
+ clk[IMX6QDL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1", 2, 7);
+ } else {
+ clk[IMX6QDL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
+ clk[IMX6QDL_CLK_CAN_ROOT] = imx_clk_divider("can_root", "pll3_60", base + 0x20, 2, 6);
+ clk[IMX6QDL_CLK_IPG_PER] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
+ clk[IMX6QDL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+ clk[IMX6QDL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+ }
clk[IMX6QDL_CLK_GPU2D_CORE_PODF] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3);
clk[IMX6QDL_CLK_GPU3D_CORE_PODF] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3);
clk[IMX6QDL_CLK_GPU3D_SHADER] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3);
clk[IMX6QDL_CLK_IPU1_PODF] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
clk[IMX6QDL_CLK_IPU2_PODF] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
- clk[IMX6QDL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
clk[IMX6QDL_CLK_LDB_DI0_PODF] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
- clk[IMX6QDL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
clk[IMX6QDL_CLK_LDB_DI1_PODF] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
clk[IMX6QDL_CLK_IPU1_DI0_PRE] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
clk[IMX6QDL_CLK_IPU1_DI1_PRE] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
@@ -364,15 +418,19 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
clk[IMX6QDL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
clk[IMX6QDL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
- clk[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
clk[IMX6QDL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
clk[IMX6QDL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
clk[IMX6QDL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
clk[IMX6QDL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
clk[IMX6QDL_CLK_ENFC_PRED] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
clk[IMX6QDL_CLK_ENFC_PODF] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
- clk[IMX6QDL_CLK_EIM_PODF] = imx_clk_fixup_divider("eim_podf", "eim_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_EIM_SLOW_PODF] = imx_clk_fixup_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup);
+ if (clk_on_imx6qp()) {
+ clk[IMX6QDL_CLK_EIM_PODF] = imx_clk_divider("eim_podf", "eim_sel", base + 0x1c, 20, 3);
+ clk[IMX6QDL_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3);
+ } else {
+ clk[IMX6QDL_CLK_EIM_PODF] = imx_clk_fixup_divider("eim_podf", "eim_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EIM_SLOW_PODF] = imx_clk_fixup_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup);
+ }
clk[IMX6QDL_CLK_VPU_AXI_PODF] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3);
clk[IMX6QDL_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
clk[IMX6QDL_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
@@ -380,7 +438,12 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
/* name parent_name reg shift width busy: reg, shift */
clk[IMX6QDL_CLK_AXI] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
clk[IMX6QDL_CLK_MMDC_CH0_AXI_PODF] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4);
- clk[IMX6QDL_CLK_MMDC_CH1_AXI_PODF] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
+ if (clk_on_imx6qp()) {
+ clk[IMX6QDL_CLK_MMDC_CH1_AXI_CG] = imx_clk_gate("mmdc_ch1_axi_cg", "periph2", base + 0x4, 18);
+ clk[IMX6QDL_CLK_MMDC_CH1_AXI_PODF] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "mmdc_ch1_axi_cg", base + 0x14, 3, 3, base + 0x48, 2);
+ } else {
+ clk[IMX6QDL_CLK_MMDC_CH1_AXI_PODF] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
+ }
clk[IMX6QDL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
clk[IMX6QDL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
@@ -432,8 +495,13 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_IPU1_DI1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4);
clk[IMX6QDL_CLK_IPU2] = imx_clk_gate2("ipu2", "ipu2_podf", base + 0x74, 6);
clk[IMX6QDL_CLK_IPU2_DI0] = imx_clk_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8);
- clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
- clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
+ if (clk_on_imx6qp()) {
+ clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_sel", base + 0x74, 12);
+ clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_sel", base + 0x74, 14);
+ } else {
+ clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
+ clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
+ }
clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2_shared("hsi_tx", "hsi_tx_podf", base + 0x74, 16, &share_count_mipi_core_cfg);
clk[IMX6QDL_CLK_MIPI_CORE_CFG] = imx_clk_gate2_shared("mipi_core_cfg", "video_27m", base + 0x74, 16, &share_count_mipi_core_cfg);
@@ -482,6 +550,16 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10);
clk[IMX6QDL_CLK_VDO_AXI] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12);
clk[IMX6QDL_CLK_VPU_AXI] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14);
+ if (clk_on_imx6qp()) {
+ clk[IMX6QDL_CLK_PRE0] = imx_clk_gate2("pre0", "pre_axi", base + 0x80, 16);
+ clk[IMX6QDL_CLK_PRE1] = imx_clk_gate2("pre1", "pre_axi", base + 0x80, 18);
+ clk[IMX6QDL_CLK_PRE2] = imx_clk_gate2("pre2", "pre_axi", base + 0x80, 20);
+ clk[IMX6QDL_CLK_PRE3] = imx_clk_gate2("pre3", "pre_axi", base + 0x80, 22);
+ clk[IMX6QDL_CLK_PRG0_AXI] = imx_clk_gate2_shared("prg0_axi", "ipu1_podf", base + 0x80, 24, &share_count_prg0);
+ clk[IMX6QDL_CLK_PRG1_AXI] = imx_clk_gate2_shared("prg1_axi", "ipu2_podf", base + 0x80, 26, &share_count_prg1);
+ clk[IMX6QDL_CLK_PRG0_APB] = imx_clk_gate2_shared("prg0_apb", "ipg", base + 0x80, 24, &share_count_prg0);
+ clk[IMX6QDL_CLK_PRG1_APB] = imx_clk_gate2_shared("prg1_apb", "ipg", base + 0x80, 26, &share_count_prg1);
+ }
clk[IMX6QDL_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
clk[IMX6QDL_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 3/3] ARM: imx: Identify imx6q rev2.0 as imx6qp
2015-12-11 10:45 [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp Bai Ping
2015-12-11 10:45 ` [PATCH 2/3] clk: imx: Add clock " Bai Ping
@ 2015-12-11 10:45 ` Bai Ping
2015-12-11 10:51 ` [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp Sascha Hauer
2015-12-11 11:37 ` Fabio Estevam
3 siblings, 0 replies; 7+ messages in thread
From: Bai Ping @ 2015-12-11 10:45 UTC (permalink / raw)
To: shawnguo, kernel
Cc: robh+dt, pawel.moll, mturquette, sboyd, devicetree,
linux-arm-kernel, linux-clk
The i.MX6QP is a different SOC, but internally we treate
it as i.MX6Q Rev_2.0 to maximum the code reusability. The chip
silicon number we read from the ANADIG_DIGPROG is 0x630100. This
patch add code to identify it as i.MX6QP Rev_1.0 when print out the
silicon version.
Signed-off-by: Bai Ping <b51503@freescale.com>
---
arch/arm/mach-imx/anatop.c | 5 ++++-
arch/arm/mach-imx/mach-imx6q.c | 8 ++++++--
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 231bb25..9622763 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -129,7 +129,10 @@ void __init imx_init_revision_from_anatop(void)
switch (digprog & 0xff) {
case 0:
- revision = IMX_CHIP_REVISION_1_0;
+ if (digprog >> 8 & 0x01)
+ revision = IMX_CHIP_REVISION_2_0;
+ else
+ revision = IMX_CHIP_REVISION_1_0;
break;
case 1:
revision = IMX_CHIP_REVISION_1_1;
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 3878494b..cb27d56 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -266,8 +266,11 @@ static void __init imx6q_init_machine(void)
{
struct device *parent;
- imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
- imx_get_soc_revision());
+ if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0)
+ imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0);
+ else
+ imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+ imx_get_soc_revision());
parent = imx_soc_device_init();
if (parent == NULL)
@@ -399,6 +402,7 @@ static void __init imx6q_init_irq(void)
static const char * const imx6q_dt_compat[] __initconst = {
"fsl,imx6dl",
"fsl,imx6q",
+ "fsl,imx6qp",
NULL,
};
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp
2015-12-11 10:45 [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp Bai Ping
2015-12-11 10:45 ` [PATCH 2/3] clk: imx: Add clock " Bai Ping
2015-12-11 10:45 ` [PATCH 3/3] ARM: imx: Identify imx6q rev2.0 as imx6qp Bai Ping
@ 2015-12-11 10:51 ` Sascha Hauer
2015-12-11 11:55 ` Bai Ping
2015-12-11 11:37 ` Fabio Estevam
3 siblings, 1 reply; 7+ messages in thread
From: Sascha Hauer @ 2015-12-11 10:51 UTC (permalink / raw)
To: Bai Ping
Cc: shawnguo, kernel, devicetree, pawel.moll, mturquette, sboyd,
robh+dt, linux-clk, linux-arm-kernel
On Fri, Dec 11, 2015 at 06:45:20PM +0800, Bai Ping wrote:
> The i.MX6Qual Plus processor is an high performance SOC of i.MX6 family.
Qual is German for pain. Is that what you mean?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp
2015-12-11 10:45 [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp Bai Ping
` (2 preceding siblings ...)
2015-12-11 10:51 ` [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp Sascha Hauer
@ 2015-12-11 11:37 ` Fabio Estevam
2015-12-11 11:58 ` Bai Ping
3 siblings, 1 reply; 7+ messages in thread
From: Fabio Estevam @ 2015-12-11 11:37 UTC (permalink / raw)
To: Bai Ping
Cc: Shawn Guo, Sascha Hauer, devicetree@vger.kernel.org, Pawel Moll,
Michael Turquette, Stephen Boyd, robh+dt@kernel.org, linux-clk,
linux-arm-kernel@lists.infradead.org
On Fri, Dec 11, 2015 at 8:45 AM, Bai Ping <b51503@freescale.com> wrote:
> The i.MX6Qual Plus processor is an high performance SOC of i.MX6 family.
> It has enhanced graphics performance and increased overall memory bandwidth
> compared to i.MX6Q. Most of the design are same as i.MX6Qual/Dual, so code
> for i.MX6Qual can be resued by this chip. The revision number is identied as
> i.MX6Q Rev2.0, but actually it is a new chip, as we did many change to the
> overall architecture.
>
> This patch adds basic dts file for the new i.MX6Qual Plus processor.
>
> Signed-off-by: Bai Ping <b51503@freescale.com>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/imx6q.dtsi | 2 +-
> arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 1 +
> arch/arm/boot/dts/imx6qp-sabreauto.dts | 67 +++++++++++++
> arch/arm/boot/dts/imx6qp-sabresd.dts | 59 +++++++++++
> arch/arm/boot/dts/imx6qp.dtsi | 157 ++++++++++++++++++++++++++++++
> include/dt-bindings/clock/imx6qdl-clock.h | 16 ++-
Better split this in three patches:
- Add imx6qp SoC support
- Add imx6qdl-sabresd support
- Add imx6qp-sabreauto support
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp
2015-12-11 10:51 ` [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp Sascha Hauer
@ 2015-12-11 11:55 ` Bai Ping
0 siblings, 0 replies; 7+ messages in thread
From: Bai Ping @ 2015-12-11 11:55 UTC (permalink / raw)
To: Sascha Hauer
Cc: shawnguo, kernel, devicetree, pawel.moll, mturquette, sboyd,
robh+dt, linux-clk, linux-arm-kernel
On 2015/12/11 18:51, Sascha Hauer wrote:
> On Fri, Dec 11, 2015 at 06:45:20PM +0800, Bai Ping wrote:
>> The i.MX6Qual Plus processor is an high performance SOC of i.MX6 family.
> Qual is German for pain. Is that what you mean?
sorry for my bad. it is a typo. it should be i.MX6Quad, not Qual?
Jacky Bai
>
> Sascha
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp
2015-12-11 11:37 ` Fabio Estevam
@ 2015-12-11 11:58 ` Bai Ping
0 siblings, 0 replies; 7+ messages in thread
From: Bai Ping @ 2015-12-11 11:58 UTC (permalink / raw)
To: Fabio Estevam
Cc: Shawn Guo, Sascha Hauer, devicetree@vger.kernel.org, Pawel Moll,
Michael Turquette, Stephen Boyd, robh+dt@kernel.org, linux-clk,
linux-arm-kernel@lists.infradead.org
On 2015/12/11 19:37, Fabio Estevam wrote:
> On Fri, Dec 11, 2015 at 8:45 AM, Bai Ping <b51503@freescale.com> wrote:
>> The i.MX6Qual Plus processor is an high performance SOC of i.MX6 family.
>> It has enhanced graphics performance and increased overall memory bandwidth
>> compared to i.MX6Q. Most of the design are same as i.MX6Qual/Dual, so code
>> for i.MX6Qual can be resued by this chip. The revision number is identied as
>> i.MX6Q Rev2.0, but actually it is a new chip, as we did many change to the
>> overall architecture.
>>
>> This patch adds basic dts file for the new i.MX6Qual Plus processor.
>>
>> Signed-off-by: Bai Ping <b51503@freescale.com>
>> ---
>> arch/arm/boot/dts/Makefile | 2 +
>> arch/arm/boot/dts/imx6q.dtsi | 2 +-
>> arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 1 +
>> arch/arm/boot/dts/imx6qp-sabreauto.dts | 67 +++++++++++++
>> arch/arm/boot/dts/imx6qp-sabresd.dts | 59 +++++++++++
>> arch/arm/boot/dts/imx6qp.dtsi | 157 ++++++++++++++++++++++++++++++
>> include/dt-bindings/clock/imx6qdl-clock.h | 16 ++-
> Better split this in three patches:
>
> - Add imx6qp SoC support
> - Add imx6qdl-sabresd support
> - Add imx6qp-sabreauto support
ok, I will spit this in Patch V2. thanks for you review.
Jacky Bai
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-12-11 11:58 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-12-11 10:45 [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp Bai Ping
2015-12-11 10:45 ` [PATCH 2/3] clk: imx: Add clock " Bai Ping
2015-12-11 10:45 ` [PATCH 3/3] ARM: imx: Identify imx6q rev2.0 as imx6qp Bai Ping
2015-12-11 10:51 ` [PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp Sascha Hauer
2015-12-11 11:55 ` Bai Ping
2015-12-11 11:37 ` Fabio Estevam
2015-12-11 11:58 ` Bai Ping
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).