From: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Laurent Pinchart
<laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
Cc: Hans Verkuil
<hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>,
Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: [PATCH v2 2/3] [media] mt9v032: Do not unset master_mode
Date: Mon, 14 Dec 2015 15:41:52 +0100 [thread overview]
Message-ID: <1450104113-6392-2-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1450104113-6392-1-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
The power_on function of the driver resets the chip and sets the
CHIP_CONTROL register to 0. This switches the operating mode to slave.
The s_stream function sets the correct mode. But this caused problems on
a board where the camera chip is operated as master. The camera started
after a random amount of time streaming an image, I observed between 10
and 300 seconds.
The STRFM_OUT and STLN_OUT pins are not connected on this board which
may cause some issues in slave mode. I could not find any documentation
about this.
Keeping the chip in master mode after the reset helped to fix this
issue for me.
Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
drivers/media/i2c/mt9v032.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c
index c1bc564a0979..cc16acf001de 100644
--- a/drivers/media/i2c/mt9v032.c
+++ b/drivers/media/i2c/mt9v032.c
@@ -349,7 +349,8 @@ static int mt9v032_power_on(struct mt9v032 *mt9v032)
if (ret < 0)
return ret;
- return regmap_write(map, MT9V032_CHIP_CONTROL, 0);
+ return regmap_write(map, MT9V032_CHIP_CONTROL,
+ MT9V032_CHIP_CONTROL_MASTER_MODE);
}
static void mt9v032_power_off(struct mt9v032 *mt9v032)
@@ -421,8 +422,7 @@ __mt9v032_get_pad_crop(struct mt9v032 *mt9v032, struct v4l2_subdev_pad_config *c
static int mt9v032_s_stream(struct v4l2_subdev *subdev, int enable)
{
- const u16 mode = MT9V032_CHIP_CONTROL_MASTER_MODE
- | MT9V032_CHIP_CONTROL_DOUT_ENABLE
+ const u16 mode = MT9V032_CHIP_CONTROL_DOUT_ENABLE
| MT9V032_CHIP_CONTROL_SEQUENTIAL;
struct mt9v032 *mt9v032 = to_mt9v032(subdev);
struct v4l2_rect *crop = &mt9v032->crop;
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-12-14 14:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-14 14:41 [PATCH v2 1/3] [media] mt9v032: Add reset and standby gpios Markus Pargmann
[not found] ` <1450104113-6392-1-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-12-14 14:41 ` Markus Pargmann [this message]
[not found] ` <1450104113-6392-2-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-12-14 19:37 ` [PATCH v2 2/3] [media] mt9v032: Do not unset master_mode Laurent Pinchart
2015-12-14 14:41 ` [PATCH v2 3/3] [media] mt9v032: Add V4L2 controls for AEC and AGC Markus Pargmann
2015-12-16 7:47 ` Laurent Pinchart
2015-12-16 10:14 ` Markus Pargmann
2015-12-29 9:38 ` Laurent Pinchart
2016-01-04 9:56 ` Markus Pargmann
2015-12-14 19:26 ` [PATCH v2 1/3] [media] mt9v032: Add reset and standby gpios Laurent Pinchart
2015-12-15 9:13 ` Markus Pargmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450104113-6392-2-git-send-email-mpa@pengutronix.de \
--to=mpa-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org \
--cc=laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).