From: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
To: Greg Kroah-Hartman
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>,
Magnus Damm <magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Yoshinori Sato
<ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
Cc: linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Geert Uytterhoeven
<geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v3 20/27] serial: sh-sci: Correct SCIF type on R-Car for BRG
Date: Mon, 14 Dec 2015 19:57:29 +0100 [thread overview]
Message-ID: <1450119456-964-21-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1450119456-964-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
The "renesas,scif" compatible value is currently used for the SCIF
variant in all Renesas SoCs of the R-Car family. However, the variant
used in the R-Car family is not the common "SH-4(A)" variant, but a
derivative with added "Baud Rate Generator for External Clock" (BRG),
which is also present in sh7734.
Use the family-specific SCIF compatible values for R-Car Gen1, Gen2, and
Gen3 SoCs to differentiate. The "renesas,scif" compatible value can
still be used as a common denominator for SCIF variants with the
"SH-4(A)" register layout (i.e. ignoring the "Serial Extension Mode
Register" (SCEMR) and the new BRG-specific registers).
Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Acked-by: Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
v3:
- Add Acked-by,
- Use family-specific instead of SoC-specific compatible values.
---
drivers/tty/serial/sh-sci.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 5b8504bfd42e9906..a202e4e40b8adafb 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2625,6 +2625,17 @@ static const struct of_device_id of_sci_match[] = {
.compatible = "renesas,scif-r7s72100",
.data = SCI_OF_DATA(PORT_SCIF, SCIx_SH2_SCIF_FIFODATA_REGTYPE),
},
+ /* Family-specific types */
+ {
+ .compatible = "renesas,rcar-gen1-scif",
+ .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE),
+ }, {
+ .compatible = "renesas,rcar-gen2-scif",
+ .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE),
+ }, {
+ .compatible = "renesas,rcar-gen3-scif",
+ .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE),
+ },
/* Generic types */
{
.compatible = "renesas,scif",
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2015-12-14 18:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1450119456-964-1-git-send-email-geert+renesas@glider.be>
2015-12-14 18:57 ` [PATCH v3 02/27] serial: sh-sci: Add fallback compatibility strings Geert Uytterhoeven
2015-12-20 3:39 ` Rob Herring
2015-12-14 18:57 ` [PATCH v3 03/27] serial: sh-sci: Update DT binding documentation for external clock input Geert Uytterhoeven
2015-12-20 3:39 ` Rob Herring
2015-12-14 18:57 ` [PATCH v3 04/27] serial: sh-sci: Update DT binding documentation for BRG support Geert Uytterhoeven
2015-12-20 3:39 ` Rob Herring
[not found] ` <1450119456-964-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2015-12-14 18:57 ` [PATCH v3 01/27] serial: sh-sci: Drop the interface clock Geert Uytterhoeven
2015-12-14 18:57 ` Geert Uytterhoeven [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450119456-964-21-git-send-email-geert+renesas@glider.be \
--to=geert+renesas-gxvu3+zwzmszqb+pc5nmwq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org \
--cc=linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).