From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-sh@vger.kernel.org, linux-serial@vger.kernel.org,
devicetree@vger.kernel.org,
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v3 09/12] ARM: shmobile: r8a7791 dtsi: Rename the serial port clock to fck
Date: Mon, 14 Dec 2015 19:58:03 +0100 [thread overview]
Message-ID: <1450119486-1285-10-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1450119486-1285-1-git-send-email-geert+renesas@glider.be>
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v3:
- No changes,
v2:
- Add Acked-by.
---
arch/arm/boot/dts/r8a7791.dtsi | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6d90cca931826874..514294e5d4f047c3 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -563,7 +563,7 @@
reg = <0 0xe6c40000 0 64>;
interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -576,7 +576,7 @@
reg = <0 0xe6c50000 0 64>;
interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -589,7 +589,7 @@
reg = <0 0xe6c60000 0 64>;
interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -602,7 +602,7 @@
reg = <0 0xe6c70000 0 64>;
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -615,7 +615,7 @@
reg = <0 0xe6c78000 0 64>;
interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -628,7 +628,7 @@
reg = <0 0xe6c80000 0 64>;
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -641,7 +641,7 @@
reg = <0 0xe6c20000 0 64>;
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -654,7 +654,7 @@
reg = <0 0xe6c30000 0 64>;
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -667,7 +667,7 @@
reg = <0 0xe6ce0000 0 64>;
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -680,7 +680,7 @@
reg = <0 0xe6e60000 0 64>;
interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -693,7 +693,7 @@
reg = <0 0xe6e68000 0 64>;
interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -706,7 +706,7 @@
reg = <0 0xe6e58000 0 64>;
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -719,7 +719,7 @@
reg = <0 0xe6ea8000 0 64>;
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -732,7 +732,7 @@
reg = <0 0xe6ee0000 0 64>;
interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -745,7 +745,7 @@
reg = <0 0xe6ee8000 0 64>;
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -758,7 +758,7 @@
reg = <0 0xe62c0000 0 96>;
interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -771,7 +771,7 @@
reg = <0 0xe62c8000 0 96>;
interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -784,7 +784,7 @@
reg = <0 0xe62d0000 0 96>;
interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
--
1.9.1
next prev parent reply other threads:[~2015-12-14 18:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-14 18:57 [PATCH v3 00/12] ARM: shmobile: dtsi: Rename the serial port clock to fck Geert Uytterhoeven
2015-12-14 18:57 ` [PATCH v3 01/12] h8300: dts: " Geert Uytterhoeven
2015-12-14 18:57 ` [PATCH v3 03/12] ARM: shmobile: r7s72100 dtsi: " Geert Uytterhoeven
2015-12-14 18:57 ` [PATCH v3 04/12] ARM: shmobile: r8a73a4 " Geert Uytterhoeven
2015-12-14 18:57 ` [PATCH v3 05/12] ARM: shmobile: r8a7740 " Geert Uytterhoeven
[not found] ` <1450119486-1285-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2015-12-14 18:57 ` [PATCH v3 02/12] ARM: shmobile: sh73a0 " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v3 06/12] ARM: shmobile: r8a7778 " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v3 07/12] ARM: shmobile: r8a7779 " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v3 10/12] ARM: shmobile: r8a7793 " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v3 08/12] ARM: shmobile: r8a7790 " Geert Uytterhoeven
2015-12-14 18:58 ` Geert Uytterhoeven [this message]
2015-12-14 18:58 ` [PATCH v3 11/12] ARM: shmobile: r8a7794 " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v3 12/12] arm64: renesas: r8a7795 " Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450119486-1285-10-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-serial@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).