From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-sh@vger.kernel.org, linux-serial@vger.kernel.org,
devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v3 12/12] arm64: renesas: r8a7795 dtsi: Rename the serial port clock to fck
Date: Mon, 14 Dec 2015 19:58:06 +0100 [thread overview]
Message-ID: <1450119486-1285-13-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1450119486-1285-1-git-send-email-geert+renesas@glider.be>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v3:
- Add Acked-by,
v2:
- New.
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index dd266e56f23ded2c..a5afd9bad6791398 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -393,7 +393,7 @@
reg = <0 0xe6540000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 520>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac1 0x31>, <&dmac1 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -407,7 +407,7 @@
reg = <0 0xe6550000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 519>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac1 0x33>, <&dmac1 0x32>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -421,7 +421,7 @@
reg = <0 0xe6560000 0 96>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 518>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac1 0x35>, <&dmac1 0x34>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -435,7 +435,7 @@
reg = <0 0xe66a0000 0 96>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 517>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x37>, <&dmac0 0x36>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -449,7 +449,7 @@
reg = <0 0xe66b0000 0 96>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 516>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x39>, <&dmac0 0x38>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -462,7 +462,7 @@
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 207>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac1 0x51>, <&dmac1 0x50>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -475,7 +475,7 @@
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 206>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac1 0x53>, <&dmac1 0x52>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -488,7 +488,7 @@
reg = <0 0xe6e88000 0 64>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 310>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac1 0x13>, <&dmac1 0x12>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -501,7 +501,7 @@
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 204>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x57>, <&dmac0 0x56>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -514,7 +514,7 @@
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 203>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x59>, <&dmac0 0x58>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -527,7 +527,7 @@
reg = <0 0xe6f30000 0 64>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 202>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac1 0x5b>, <&dmac1 0x5a>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
--
1.9.1
prev parent reply other threads:[~2015-12-14 18:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-14 18:57 [PATCH v3 00/12] ARM: shmobile: dtsi: Rename the serial port clock to fck Geert Uytterhoeven
2015-12-14 18:57 ` [PATCH v3 01/12] h8300: dts: " Geert Uytterhoeven
2015-12-14 18:57 ` [PATCH v3 03/12] ARM: shmobile: r7s72100 dtsi: " Geert Uytterhoeven
2015-12-14 18:57 ` [PATCH v3 04/12] ARM: shmobile: r8a73a4 " Geert Uytterhoeven
2015-12-14 18:57 ` [PATCH v3 05/12] ARM: shmobile: r8a7740 " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v3 08/12] ARM: shmobile: r8a7790 " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v3 09/12] ARM: shmobile: r8a7791 " Geert Uytterhoeven
[not found] ` <1450119486-1285-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2015-12-14 18:57 ` [PATCH v3 02/12] ARM: shmobile: sh73a0 " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v3 06/12] ARM: shmobile: r8a7778 " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v3 07/12] ARM: shmobile: r8a7779 " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v3 10/12] ARM: shmobile: r8a7793 " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v3 11/12] ARM: shmobile: r8a7794 " Geert Uytterhoeven
2015-12-14 18:58 ` Geert Uytterhoeven [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450119486-1285-13-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=linux-serial@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).