devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
To: Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>,
	Magnus Damm <magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Geert Uytterhoeven
	<geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Subject: [PATCH v2 4/9] ARM: shmobile: koelsch dts: Enable SCIF_CLK frequency and pins
Date: Mon, 14 Dec 2015 19:58:19 +0100	[thread overview]
Message-ID: <1450119504-1517-5-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1450119504-1517-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>

Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.

This increases the range and accuracy of supported baud rates:
  - SCIF:
      - Supports now 50, 75, 110, 1152000, 1500000, 2000000, and
        4000000 bps,
      - Perfect match for standard 50-460800, and 9216000 bps.
      - More accurate 576000 bps.
  - HSCIF:
      - Supports now 50, 75, 110, 134, 150, and 200 bps,
      - Perfect match for standard 50-460800, and 9216000 bps.
      - More accurate 576000, 1152000, 3000000, 3500000, and 4000000
	bps.

Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
---
v2:
  - Add Reviewed-by.
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index c94a0fb807a2ff29..f8024c0d1114c607 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -320,6 +320,9 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	i2c2_pins: i2c2 {
 		renesas,groups = "i2c2";
 		renesas,function = "i2c2";
@@ -340,6 +343,11 @@
 		renesas,function = "scif1";
 	};
 
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk";
+		renesas,function = "scif_clk";
+	};
+
 	ether_pins: ether {
 		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
 		renesas,function = "eth";
@@ -440,6 +448,11 @@
 	status = "okay";
 };
 
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-12-14 18:58 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-14 18:58 [PATCH v2 0/9] ARM: shmobile: dts: Enable SCIF_CLK frequency and pins Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v2 1/9] ARM: shmobile: alt " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v2 2/9] ARM: shmobile: bockw " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v2 3/9] ARM: shmobile: gose " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v2 5/9] ARM: shmobile: lager " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v2 6/9] ARM: shmobile: marzen " Geert Uytterhoeven
     [not found] ` <1450119504-1517-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2015-12-14 18:58   ` Geert Uytterhoeven [this message]
2015-12-14 18:58   ` [PATCH v2 7/9] ARM: shmobile: porter " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v2 8/9] ARM: shmobile: silk " Geert Uytterhoeven
2015-12-14 18:58 ` [PATCH v2 9/9] arm64: renesas: salvator-x " Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450119504-1517-5-git-send-email-geert+renesas@glider.be \
    --to=geert+renesas-gxvu3+zwzmszqb+pc5nmwq@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org \
    --cc=linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).