From: Bai Ping <b51503@freescale.com>
To: shawnguo@kernel.org, kernel@pengutronix.de
Cc: pawel.moll@arm.com, robh+dt@kernel.org, mturquette@baylibre.com,
sboyd@codeaurora.org, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v2 2/5] ARM: dts: imx: Add basic dts support for imx6qp-sabresd
Date: Tue, 15 Dec 2015 14:07:50 +0800 [thread overview]
Message-ID: <1450159673-27314-3-git-send-email-b51503@freescale.com> (raw)
In-Reply-To: <1450159673-27314-1-git-send-email-b51503@freescale.com>
The patch adds dts file for imx6qp-sabresd board.
Signed-off-by: Bai Ping <b51503@freescale.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 1 +
arch/arm/boot/dts/imx6qp-sabresd.dts | 59 ++++++++++++++++++++++++++++++++++
3 files changed, 61 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6qp-sabresd.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 36d8133..dfba765 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -302,6 +302,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-sabreauto.dtb \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
+ imx6qp-sabresd.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6u-801x.dtb \
imx6dl-tx6u-811x.dtb \
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index a6d445c..f65f57b 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -238,6 +238,7 @@
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
+ regulator-ramp-delay = <6250>;
};
sw3a_reg: sw3a {
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
new file mode 100644
index 0000000..c3ab2b6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "imx6q-sabresd.dts"
+#include "imx6qp.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
+ compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+};
+
+&cpu0 {
+ arm-supply = <&sw2_reg>;
+};
+
+&iomuxc {
+ imx6qdl-sabresd {
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
+ MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
+ MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
+ MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+ };
+};
+
+&pcie {
+ power-on-gpio = <&gpio3 19 0>;
+ reset-gpio = <&gpio7 12 0>;
+ status = "okay";
+};
--
1.9.1
next prev parent reply other threads:[~2015-12-15 6:07 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-15 6:07 [PATCH v2 0/5] Add support for imx6qp Bai Ping
2015-12-15 6:07 ` [PATCH v2 1/5] ARM: dts: imx: Add basic dts support for imx6qp SOC Bai Ping
2016-01-28 7:42 ` Shawn Guo
2016-01-28 10:38 ` Ping Bai
2015-12-15 6:07 ` Bai Ping [this message]
2016-01-28 7:54 ` [PATCH v2 2/5] ARM: dts: imx: Add basic dts support for imx6qp-sabresd Shawn Guo
2016-01-28 10:43 ` Ping Bai
2015-12-15 6:07 ` [PATCH v2 3/5] ARM: dts: imx: Add basic dts support for imx6qp-sabreauto Bai Ping
2016-01-28 7:57 ` Shawn Guo
2015-12-15 6:07 ` [PATCH v2 4/5] clk: imx: Add clock support for imx6qp Bai Ping
2015-12-15 6:07 ` [PATCH v2 5/5] ARM: imx: Add msl code " Bai Ping
2016-01-28 8:10 ` Shawn Guo
2016-01-28 10:45 ` Ping Bai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450159673-27314-3-git-send-email-b51503@freescale.com \
--to=b51503@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).