From: Bai Ping <b51503@freescale.com>
To: shawnguo@kernel.org, kernel@pengutronix.de
Cc: pawel.moll@arm.com, robh+dt@kernel.org, mturquette@baylibre.com,
sboyd@codeaurora.org, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v2 3/5] ARM: dts: imx: Add basic dts support for imx6qp-sabreauto
Date: Tue, 15 Dec 2015 14:07:51 +0800 [thread overview]
Message-ID: <1450159673-27314-4-git-send-email-b51503@freescale.com> (raw)
In-Reply-To: <1450159673-27314-1-git-send-email-b51503@freescale.com>
This patch adds basic dts file for imx6qp-sabreauto board.
Signed-off-by: Bai Ping <b51503@freescale.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6qp-sabreauto.dts | 67 ++++++++++++++++++++++++++++++++++
2 files changed, 68 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6qp-sabreauto.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index dfba765..7996a51 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -329,6 +329,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-phytec-pbab01.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
+ imx6qp-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
imx6q-sbc6x.dtb \
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
new file mode 100644
index 0000000..b24aae6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "imx6q-sabreauto.dts"
+#include "imx6qp.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
+ compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+};
+
+
+&fec {
+ pinctrl-assert-gpios = <&max7322 0 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c2 {
+ max7322: gpio@68 {
+ compatible = "maxim,max7322";
+ reg = <0x68>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&iomuxc {
+ imx6qdl-sabreauto {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b018
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b018
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b018
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b018
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b018
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b018
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b018
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b018
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b018
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b018
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b018
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b018
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+ };
+};
+
+&pcie {
+ reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&vgen3_reg {
+ regulator-always-on;
+};
--
1.9.1
next prev parent reply other threads:[~2015-12-15 6:07 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-15 6:07 [PATCH v2 0/5] Add support for imx6qp Bai Ping
2015-12-15 6:07 ` [PATCH v2 1/5] ARM: dts: imx: Add basic dts support for imx6qp SOC Bai Ping
2016-01-28 7:42 ` Shawn Guo
2016-01-28 10:38 ` Ping Bai
2015-12-15 6:07 ` [PATCH v2 2/5] ARM: dts: imx: Add basic dts support for imx6qp-sabresd Bai Ping
2016-01-28 7:54 ` Shawn Guo
2016-01-28 10:43 ` Ping Bai
2015-12-15 6:07 ` Bai Ping [this message]
2016-01-28 7:57 ` [PATCH v2 3/5] ARM: dts: imx: Add basic dts support for imx6qp-sabreauto Shawn Guo
2015-12-15 6:07 ` [PATCH v2 4/5] clk: imx: Add clock support for imx6qp Bai Ping
2015-12-15 6:07 ` [PATCH v2 5/5] ARM: imx: Add msl code " Bai Ping
2016-01-28 8:10 ` Shawn Guo
2016-01-28 10:45 ` Ping Bai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450159673-27314-4-git-send-email-b51503@freescale.com \
--to=b51503@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).