From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Subject: [PATCH v3 8/9] phy: omap-usb2: use omap_usb_power_off to power off the PHY during probe Date: Tue, 15 Dec 2015 14:46:07 +0530 Message-ID: <1450170968-11282-9-git-send-email-kishon@ti.com> References: <1450170968-11282-1-git-send-email-kishon@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1450170968-11282-1-git-send-email-kishon@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: kishon@ti.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, rogerq@ti.com, nsekhar@ti.com, linux-pci@vger.kernel.org, linux-usb@vger.kernel.org, tony@atomide.com, t-kristo@ti.com List-Id: devicetree@vger.kernel.org No functional change. Previously omap_control_phy_power() was used to power off the PHY during probe. But once phy-omap-usb2 driver is adapted to use syscon, omap_control_phy_power() cannot be used. Hence used omap_usb_power_off to power off the PHY. Signed-off-by: Kishon Vijay Abraham I Acked-by: Roger Quadros --- drivers/phy/phy-omap-usb2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 0fe8058..c79633e 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -241,7 +241,6 @@ static int omap_usb2_probe(struct platform_device *pdev) } phy->control_dev = &control_pdev->dev; - omap_control_phy_power(phy->control_dev, 0); otg->set_host = omap_usb_set_host; otg->set_peripheral = omap_usb_set_peripheral; @@ -261,6 +260,7 @@ static int omap_usb2_probe(struct platform_device *pdev) } phy_set_drvdata(generic_phy, phy); + omap_usb_power_off(generic_phy); phy_provider = devm_of_phy_provider_register(phy->dev, of_phy_simple_xlate); -- 1.7.9.5