From: Caesar Wang <wxt@rock-chips.com>
To: heiko@sntech.de, mturquette@baylibre.com, sboyd@codeaurora.org
Cc: leozwang@google.com, keescook@google.com, leecam@google.com,
devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Caesar Wang <wxt@rock-chips.com>
Subject: [PATCH 5/5] ARM: config: Add the rk3036 configure for kylin board
Date: Wed, 16 Dec 2015 16:27:21 +0800 [thread overview]
Message-ID: <1450254441-3243-6-git-send-email-wxt@rock-chips.com> (raw)
In-Reply-To: <1450254441-3243-1-git-send-email-wxt@rock-chips.com>
Add RK3036-specific configuration for Kylin board.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---
arch/arm/configs/rk3036_kylin_defconfig | 230 ++++++++++++++++++++++++++++++++
1 file changed, 230 insertions(+)
create mode 100644 arch/arm/configs/rk3036_kylin_defconfig
diff --git a/arch/arm/configs/rk3036_kylin_defconfig b/arch/arm/configs/rk3036_kylin_defconfig
new file mode 100644
index 0000000..692c393
--- /dev/null
+++ b/arch/arm/configs/rk3036_kylin_defconfig
@@ -0,0 +1,230 @@
+CONFIG_CROSS_COMPILE="arm-linux-gnueabi-"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="radxarock"
+CONFIG_SYSVIPC=y
+# CONFIG_USELIB is not set
+CONFIG_AUDIT=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_PL310_ERRATA_588369=y
+CONFIG_PL310_ERRATA_727915=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+# CONFIG_COMPACTION is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_CLEANCACHE=y
+CONFIG_FRONTSWAP=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_SRAM=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_RK3X=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_THERMAL=y
+CONFIG_CPU_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=y
+CONFIG_MFD_RK808=y
+CONFIG_MFD_TPS65910=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_ACT8865=y
+CONFIG_REGULATOR_FAN53555=y
+CONFIG_REGULATOR_RK808=y
+CONFIG_DRM=y
+CONFIG_DRM_ROCKCHIP=y
+CONFIG_ROCKCHIP_DW_HDMI=y
+CONFIG_ROCKCHIP_INNO_HDMI=y
+CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_ROCKCHIP=y
+CONFIG_SND_SOC_ROCKCHIP_I2S=y
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_OTG=y
+CONFIG_USB_MON=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC2_PLATFORM=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_G_ANDROID=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_HYM8563=y
+CONFIG_RTC_DRV_RK808=y
+CONFIG_DMADEVICES=y
+CONFIG_DMADEVICES_DEBUG=y
+CONFIG_DMADEVICES_VDEBUG=y
+CONFIG_PL330_DMA=y
+CONFIG_ASYNC_TX_DMA=y
+CONFIG_STAGING=y
+CONFIG_R8188EU=y
+CONFIG_R8723AU=y
+CONFIG_ASHMEM=y
+CONFIG_ANDROID_TIMED_GPIO=y
+CONFIG_ANDROID_LOW_MEMORY_KILLER=y
+CONFIG_SYNC=y
+CONFIG_SW_SYNC=y
+CONFIG_SW_SYNC_USER=y
+CONFIG_ION=y
+CONFIG_ION_DUMMY=y
+CONFIG_COMMON_CLK_RK808=y
+CONFIG_ROCKCHIP_IOMMU=y
+CONFIG_IIO=y
+CONFIG_ROCKCHIP_SARADC=y
+CONFIG_INV_MPU6050_IIO=y
+CONFIG_AK8975=y
+CONFIG_PWM=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_USB=y
+CONFIG_ANDROID=y
+CONFIG_ANDROID_BINDER_IPC=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_TIMER_STATS=y
+CONFIG_KGDB=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_RK29_UART2=y
+CONFIG_DEBUG_UART_8250_WORD=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_DISABLE=y
+# CONFIG_SECURITY_SELINUX_AVC_STATS is not set
+CONFIG_CRYPTO_ANSI_CPRNG=y
+# CONFIG_CRYPTO_HW is not set
--
1.9.1
next prev parent reply other threads:[~2015-12-16 8:27 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-16 8:27 [PATCH 0/5] Kylin-board is based on RK3036 SOCs, add the initiation Caesar Wang
2015-12-16 8:27 ` [PATCH 1/5] clk: rockchip: rk3036: include downstream muxes into fractional dividers Caesar Wang
[not found] ` <1450254441-3243-2-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-12-16 10:55 ` kbuild test robot
2015-12-16 8:27 ` [PATCH 2/5] clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for aclk_vio Caesar Wang
2015-12-16 21:24 ` Heiko Stübner
2015-12-16 8:27 ` [PATCH 3/5] ARM: dts: rockchip: update the core dts for rk3036 Caesar Wang
2015-12-16 13:51 ` Heiko Stübner
2015-12-16 8:27 ` [PATCH 4/5] ARM: dts: rockchip: add the kylin board " Caesar Wang
2015-12-16 8:27 ` Caesar Wang [this message]
2015-12-16 13:54 ` [PATCH 5/5] ARM: config: Add the rk3036 configure for kylin board Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450254441-3243-6-git-send-email-wxt@rock-chips.com \
--to=wxt@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=keescook@google.com \
--cc=leecam@google.com \
--cc=leozwang@google.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).