* [PATCH v4 1/4] ARM: bcm2835: Define two new packets from the latest firmware.
2015-12-17 0:26 [PATCH v4 0/4] Raspberry Pi power domains Eric Anholt
@ 2015-12-17 0:26 ` Eric Anholt
2015-12-17 0:26 ` [PATCH v4 2/4] ARM: bcm2835: add rpi power domain driver Eric Anholt
` (3 subsequent siblings)
4 siblings, 0 replies; 8+ messages in thread
From: Eric Anholt @ 2015-12-17 0:26 UTC (permalink / raw)
To: linux-rpi-kernel, Rafael J. Wysocki
Cc: linux-arm-kernel, linux-kernel, Stephen Warren, Lee Jones,
Florian Fainelli, Kevin Hilman, Ulf Hansson, Greg Kroah-Hartman,
Alexander Aring, devicetree, linux-pm, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Eric Anholt
These packets give us direct access to the firmware's power management
code, as opposed to GET/SET_POWER_STATE packets that only had a couple
of domains implemented.
Signed-off-by: Eric Anholt <eric@anholt.net>
---
include/soc/bcm2835/raspberrypi-firmware.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index c07d74a..3fb3571 100644
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -72,10 +72,12 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_SET_ENABLE_QPU = 0x00030012,
RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014,
RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020,
+ RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030,
RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001,
RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002,
RPI_FIRMWARE_SET_VOLTAGE = 0x00038003,
RPI_FIRMWARE_SET_TURBO = 0x00038009,
+ RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030,
/* Dispmanx TAGS */
RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001,
--
2.6.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v4 2/4] ARM: bcm2835: add rpi power domain driver
2015-12-17 0:26 [PATCH v4 0/4] Raspberry Pi power domains Eric Anholt
2015-12-17 0:26 ` [PATCH v4 1/4] ARM: bcm2835: Define two new packets from the latest firmware Eric Anholt
@ 2015-12-17 0:26 ` Eric Anholt
2015-12-17 16:28 ` Ulf Hansson
2015-12-17 0:26 ` [PATCH v4 3/4] dt-bindings: add rpi power domain driver bindings Eric Anholt
` (2 subsequent siblings)
4 siblings, 1 reply; 8+ messages in thread
From: Eric Anholt @ 2015-12-17 0:26 UTC (permalink / raw)
To: linux-rpi-kernel, Rafael J. Wysocki
Cc: linux-arm-kernel, linux-kernel, Stephen Warren, Lee Jones,
Florian Fainelli, Kevin Hilman, Ulf Hansson, Greg Kroah-Hartman,
Alexander Aring, devicetree, linux-pm, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Eric Anholt
From: Alexander Aring <alex.aring@gmail.com>
This patch adds support for several power domains on Raspberry Pi,
including USB (so it can be enabled even if the bootloader didn't do
it), and graphics.
This patch is the combined work of Eric Anholt (who wrote USB support
inside of the Raspberry Pi firmware driver, and wrote the non-USB
domain support) and Alexander Aring (who separated the original USB
work out from the firmware driver).
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
v2: Add support for power domains other than USB, using the new
firmware interface, reword commit message (changes by Eric)
v3: Restructure as a builtin driver, and drop
of_genpd_add_provider_onecell error handling to avoid
pm_genpd_exit() dependency until that API can be settled. Clean
up copyright header, add missing ISP initialization, and fix typo
in transposer's name.
v4: Move to drivers/soc/bcm/, move include to dt-bindings/soc/, set up
Makefile for the drivers/soc/bcm following clk/'s model.
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/bcm/Kconfig | 9 +
drivers/soc/bcm/Makefile | 1 +
drivers/soc/bcm/raspberrypi-power.c | 247 ++++++++++++++++++++++++++++
include/dt-bindings/soc/raspberrypi-power.h | 41 +++++
6 files changed, 300 insertions(+)
create mode 100644 drivers/soc/bcm/Kconfig
create mode 100644 drivers/soc/bcm/Makefile
create mode 100644 drivers/soc/bcm/raspberrypi-power.c
create mode 100644 include/dt-bindings/soc/raspberrypi-power.h
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 4e853ed..8441426 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -1,5 +1,6 @@
menu "SOC (System On Chip) specific Drivers"
+source "drivers/soc/bcm/Kconfig"
source "drivers/soc/brcmstb/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index f2ba2e9..f3f955c 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -2,6 +2,7 @@
# Makefile for the Linux Kernel SOC specific device drivers.
#
+obj-y += bcm/
obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/
obj-$(CONFIG_MACH_DOVE) += dove/
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig
new file mode 100644
index 0000000..5ba1827
--- /dev/null
+++ b/drivers/soc/bcm/Kconfig
@@ -0,0 +1,9 @@
+config RASPBERRYPI_POWER
+ bool "Raspberry Pi power domain driver"
+ depends on ARCH_BCM2835 || COMPILE_TEST
+ depends on RASPBERRYPI_FIRMWARE
+ select PM_GENERIC_DOMAINS if PM
+ select PM_GENERIC_DOMAINS_OF if PM
+ help
+ This enables support for the RPi power domains which can be enabled
+ or disabled via the RPi firmware.
diff --git a/drivers/soc/bcm/Makefile b/drivers/soc/bcm/Makefile
new file mode 100644
index 0000000..63aa3eb
--- /dev/null
+++ b/drivers/soc/bcm/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o
diff --git a/drivers/soc/bcm/raspberrypi-power.c b/drivers/soc/bcm/raspberrypi-power.c
new file mode 100644
index 0000000..d5bab06
--- /dev/null
+++ b/drivers/soc/bcm/raspberrypi-power.c
@@ -0,0 +1,247 @@
+/* (C) 2015 Pengutronix, Alexander Aring <aar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Authors:
+ * Alexander Aring <aar@pengutronix.de>
+ * Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <dt-bindings/soc/raspberrypi-power.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+/*
+ * Firmware indices for the old power domains interface. Only a few
+ * of them were actually implemented.
+ */
+#define RPI_OLD_POWER_DOMAIN_USB 3
+#define RPI_OLD_POWER_DOMAIN_V3D 10
+
+struct rpi_power_domain {
+ u32 domain;
+ bool enabled;
+ bool old_interface;
+ struct generic_pm_domain base;
+ struct rpi_firmware *fw;
+};
+
+struct rpi_power_domains {
+ bool has_new_interface;
+ struct genpd_onecell_data xlate;
+ struct rpi_firmware *fw;
+ struct rpi_power_domain domains[RPI_POWER_DOMAIN_COUNT];
+};
+
+/*
+ * Packet definition used by RPI_FIRMWARE_SET_POWER_STATE and
+ * RPI_FIRMWARE_SET_DOMAIN_STATE
+ */
+struct rpi_power_domain_packet {
+ u32 domain;
+ u32 on;
+} __packet;
+
+/*
+ * Asks the firmware to enable or disable power on a specific power
+ * domain.
+ */
+static int rpi_firmware_set_power(struct rpi_power_domain *rpi_domain, bool on)
+{
+ struct rpi_power_domain_packet packet;
+
+ packet.domain = rpi_domain->domain;
+ packet.on = on;
+ return rpi_firmware_property(rpi_domain->fw,
+ rpi_domain->old_interface ?
+ RPI_FIRMWARE_SET_POWER_STATE :
+ RPI_FIRMWARE_SET_DOMAIN_STATE,
+ &packet, sizeof(packet));
+}
+
+static int rpi_domain_off(struct generic_pm_domain *domain)
+{
+ struct rpi_power_domain *rpi_domain =
+ container_of(domain, struct rpi_power_domain, base);
+
+ return rpi_firmware_set_power(rpi_domain, false);
+}
+
+static int rpi_domain_on(struct generic_pm_domain *domain)
+{
+ struct rpi_power_domain *rpi_domain =
+ container_of(domain, struct rpi_power_domain, base);
+
+ return rpi_firmware_set_power(rpi_domain, true);
+}
+
+static void rpi_common_init_power_domain(struct rpi_power_domains *rpi_domains,
+ int xlate_index, const char *name)
+{
+ struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
+
+ dom->fw = rpi_domains->fw;
+
+ dom->base.name = name;
+ dom->base.power_on = rpi_domain_on;
+ dom->base.power_off = rpi_domain_off;
+
+ /*
+ * Treat all power domains as off at boot.
+ *
+ * The firmware itself may be keeping some domains on, but
+ * from Linux's perspective all we control is the refcounts
+ * that we give to the firmware, and we can't ask the firmware
+ * to turn off something that we haven't ourselves turned on.
+ */
+ pm_genpd_init(&dom->base, NULL, true);
+
+ rpi_domains->xlate.domains[xlate_index] = &dom->base;
+}
+
+static void rpi_init_power_domain(struct rpi_power_domains *rpi_domains,
+ int xlate_index, const char *name)
+{
+ struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
+
+ if (!rpi_domains->has_new_interface)
+ return;
+
+ /* The DT binding index is the firmware's domain index minus one. */
+ dom->domain = xlate_index + 1;
+
+ rpi_common_init_power_domain(rpi_domains, xlate_index, name);
+}
+
+static void rpi_init_old_power_domain(struct rpi_power_domains *rpi_domains,
+ int xlate_index, int domain,
+ const char *name)
+{
+ struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
+
+ dom->old_interface = true;
+ dom->domain = domain;
+
+ rpi_common_init_power_domain(rpi_domains, xlate_index, name);
+}
+
+/*
+ * Detects whether the firmware supports the new power domains interface.
+ *
+ * The firmware doesn't actually return an error on an unknown tag,
+ * and just skips over it, so we do the detection by putting an
+ * unexpected value in the return field and checking if it was
+ * unchanged.
+ */
+static bool
+rpi_has_new_domain_support(struct rpi_power_domains *rpi_domains)
+{
+ struct rpi_power_domain_packet packet;
+ int ret;
+
+ packet.domain = RPI_POWER_DOMAIN_ARM;
+ packet.on = ~0;
+
+ ret = rpi_firmware_property(rpi_domains->fw,
+ RPI_FIRMWARE_GET_DOMAIN_STATE,
+ &packet, sizeof(packet));
+
+ return ret == 0 && packet.on != ~0;
+}
+
+static int rpi_power_probe(struct platform_device *pdev)
+{
+ struct device_node *fw_np;
+ struct device *dev = &pdev->dev;
+ struct rpi_power_domains *rpi_domains;
+
+ rpi_domains = devm_kzalloc(dev, sizeof(*rpi_domains), GFP_KERNEL);
+ if (!rpi_domains)
+ return -ENOMEM;
+
+ rpi_domains->xlate.domains =
+ devm_kzalloc(dev, sizeof(*rpi_domains->xlate.domains) *
+ RPI_POWER_DOMAIN_COUNT, GFP_KERNEL);
+ if (!rpi_domains->xlate.domains)
+ return -ENOMEM;
+
+ rpi_domains->xlate.num_domains = RPI_POWER_DOMAIN_COUNT;
+
+ fw_np = of_parse_phandle(pdev->dev.of_node, "firmware", 0);
+ if (!fw_np) {
+ dev_err(&pdev->dev, "no firmware node\n");
+ return -ENODEV;
+ }
+
+ rpi_domains->fw = rpi_firmware_get(fw_np);
+ of_node_put(fw_np);
+ if (!rpi_domains->fw)
+ return -EPROBE_DEFER;
+
+ rpi_domains->has_new_interface =
+ rpi_has_new_domain_support(rpi_domains);
+
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C0, "I2C0");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C1, "I2C1");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C2, "I2C2");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VIDEO_SCALER,
+ "VIDEO_SCALER");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VPU1, "VPU1");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_HDMI, "HDMI");
+
+ /*
+ * Use the old firmware interface for USB power, so that we
+ * can turn it on even if the firmware hasn't been updated.
+ */
+ rpi_init_old_power_domain(rpi_domains, RPI_POWER_DOMAIN_USB,
+ RPI_OLD_POWER_DOMAIN_USB, "USB");
+
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VEC, "VEC");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_JPEG, "JPEG");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_H264, "H264");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_V3D, "V3D");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ISP, "ISP");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM0, "UNICAM0");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM1, "UNICAM1");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2RX, "CCP2RX");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CSI2, "CSI2");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CPI, "CPI");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI0, "DSI0");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI1, "DSI1");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_TRANSPOSER,
+ "TRANSPOSER");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2TX, "CCP2TX");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CDP, "CDP");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ARM, "ARM");
+
+ of_genpd_add_provider_onecell(dev->of_node, &rpi_domains->xlate);
+
+ platform_set_drvdata(pdev, rpi_domains);
+
+ return 0;
+}
+
+static const struct of_device_id rpi_power_of_match[] = {
+ { .compatible = "raspberrypi,bcm2835-power", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rpi_power_of_match);
+
+static struct platform_driver rpi_power_driver = {
+ .driver = {
+ .name = "raspberrypi-power",
+ .of_match_table = rpi_power_of_match,
+ },
+ .probe = rpi_power_probe,
+};
+builtin_platform_driver(rpi_power_driver);
+
+MODULE_AUTHOR("Alexander Aring <aar@pengutronix.de>");
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("Raspberry Pi power domain driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/dt-bindings/soc/raspberrypi-power.h b/include/dt-bindings/soc/raspberrypi-power.h
new file mode 100644
index 0000000..b3ff8e0
--- /dev/null
+++ b/include/dt-bindings/soc/raspberrypi-power.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright © 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DT_BINDINGS_ARM_BCM2835_RPI_POWER_H
+#define _DT_BINDINGS_ARM_BCM2835_RPI_POWER_H
+
+/* These power domain indices are the firmware interface's indices
+ * minus one.
+ */
+#define RPI_POWER_DOMAIN_I2C0 0
+#define RPI_POWER_DOMAIN_I2C1 1
+#define RPI_POWER_DOMAIN_I2C2 2
+#define RPI_POWER_DOMAIN_VIDEO_SCALER 3
+#define RPI_POWER_DOMAIN_VPU1 4
+#define RPI_POWER_DOMAIN_HDMI 5
+#define RPI_POWER_DOMAIN_USB 6
+#define RPI_POWER_DOMAIN_VEC 7
+#define RPI_POWER_DOMAIN_JPEG 8
+#define RPI_POWER_DOMAIN_H264 9
+#define RPI_POWER_DOMAIN_V3D 10
+#define RPI_POWER_DOMAIN_ISP 11
+#define RPI_POWER_DOMAIN_UNICAM0 12
+#define RPI_POWER_DOMAIN_UNICAM1 13
+#define RPI_POWER_DOMAIN_CCP2RX 14
+#define RPI_POWER_DOMAIN_CSI2 15
+#define RPI_POWER_DOMAIN_CPI 16
+#define RPI_POWER_DOMAIN_DSI0 17
+#define RPI_POWER_DOMAIN_DSI1 18
+#define RPI_POWER_DOMAIN_TRANSPOSER 19
+#define RPI_POWER_DOMAIN_CCP2TX 20
+#define RPI_POWER_DOMAIN_CDP 21
+#define RPI_POWER_DOMAIN_ARM 22
+
+#define RPI_POWER_DOMAIN_COUNT 23
+
+#endif /* _DT_BINDINGS_ARM_BCM2835_RPI_POWER_H */
--
2.6.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v4 4/4] ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.
2015-12-17 0:26 [PATCH v4 0/4] Raspberry Pi power domains Eric Anholt
` (2 preceding siblings ...)
2015-12-17 0:26 ` [PATCH v4 3/4] dt-bindings: add rpi power domain driver bindings Eric Anholt
@ 2015-12-17 0:26 ` Eric Anholt
2015-12-17 22:32 ` [PATCH v4 0/4] Raspberry Pi power domains Kevin Hilman
4 siblings, 0 replies; 8+ messages in thread
From: Eric Anholt @ 2015-12-17 0:26 UTC (permalink / raw)
To: linux-rpi-kernel, Rafael J. Wysocki
Cc: linux-arm-kernel, linux-kernel, Stephen Warren, Lee Jones,
Florian Fainelli, Kevin Hilman, Ulf Hansson, Greg Kroah-Hartman,
Alexander Aring, devicetree, linux-pm, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Eric Anholt
From: Alexander Aring <alex.aring@gmail.com>
This connects the USB driver to the USB power domain, so that USB can
actually be turned on at boot if the bootloader didn't do it for us.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
arch/arm/boot/dts/bcm2835-rpi.dtsi | 11 +++++++++++
arch/arm/boot/dts/bcm2835.dtsi | 2 +-
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 3572f03..7982d22 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -1,3 +1,4 @@
+#include <dt-bindings/soc/raspberrypi-power.h>
#include "bcm2835.dtsi"
/ {
@@ -20,6 +21,12 @@
compatible = "raspberrypi,bcm2835-firmware";
mboxes = <&mailbox>;
};
+
+ power: power {
+ compatible = "raspberrypi,bcm2835-power";
+ firmware = <&firmware>;
+ #power-domain-cells = <1>;
+ };
};
};
@@ -60,3 +67,7 @@
status = "okay";
bus-width = <4>;
};
+
+&usb {
+ power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index aef64de..6d62af0 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -177,7 +177,7 @@
status = "disabled";
};
- usb@7e980000 {
+ usb: usb@7e980000 {
compatible = "brcm,bcm2835-usb";
reg = <0x7e980000 0x10000>;
interrupts = <1 9>;
--
2.6.2
^ permalink raw reply related [flat|nested] 8+ messages in thread