From: Sinan Kaya <okaya@codeaurora.org>
To: dmaengine@vger.kernel.org, mark.rutland@arm.com,
timur@codeaurora.org, devicetree@vger.kernel.org,
cov@codeaurora.org, vinod.koul@intel.com, jcm@redhat.com
Cc: agross@codeaurora.org, arnd@arndb.de,
linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sinan Kaya <okaya@codeaurora.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH V10 0/7] dma: add Qualcomm Technologies HIDMA driver
Date: Thu, 17 Dec 2015 12:01:15 -0500 [thread overview]
Message-ID: <1450371684-23415-1-git-send-email-okaya@codeaurora.org> (raw)
The Qualcomm Technologies HIDMA device has been designed
to support virtualization technology. The driver has been
divided into two to follow the hardware design.
1. HIDMA Management driver
2. HIDMA Channel driver
Each HIDMA HW consists of multiple channels. These channels
share some set of common parameters. These parameters are
initialized by the management driver during power up.
Same management driver is used for monitoring the execution
of the channels. Management driver can change the performance
behavior dynamically such as bandwidth allocation and
prioritization in the future.
The management driver is executed in hypervisor context and
is the main management entity for all channels provided by
the device.
Changes from V9: (https://lkml.org/lkml/2015/12/11/584)
* none
Changes from V9: (https://lkml.org/lkml/2015/12/11/585)
* split device tree documentation from code
* correct syntax error in device tree documentation
* describe max value of the weight
* document that array and weight attributes are array
* add object hierarchy support
* move sysfs priority and weight files into chanops directory.
Changes from V9: (https://lkml.org/lkml/2015/12/11/588)
* add object hierarchy support
* rename event-channel to channel-index
* create a sysfs entry for channel-index
* add pm_runtime_get/sync around hidma_ll_isenabled
Changes from V9: (https://lkml.org/lkml/2015/12/11/586)
* rename TRE chidx to idx to not mix with the channel id.
Changes from V9: (https://lkml.org/lkml/2015/12/11/587)
* none
Sinan Kaya (7):
dma: qcom_bam_dma: move to qcom directory
dma: hidma: Add Device Tree support
dma: add Qualcomm Technologies HIDMA management driver
dma: add Qualcomm Technologies HIDMA channel driver
dma: qcom_hidma: implement lower level hardware interface
dma: qcom_hidma: add debugfs hooks
dma: qcom_hidma: add support for object hierarchy
Documentation/ABI/testing/sysfs-platform-hidma | 9 +
.../ABI/testing/sysfs-platform-hidma-mgmt | 97 +++
.../devicetree/bindings/dma/qcom_hidma_mgmt.txt | 79 ++
drivers/dma/Kconfig | 11 +-
drivers/dma/Makefile | 2 +-
drivers/dma/qcom/Kconfig | 29 +
drivers/dma/qcom/Makefile | 4 +
drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} | 4 +-
drivers/dma/qcom/hidma.c | 868 +++++++++++++++++++
drivers/dma/qcom/hidma.h | 163 ++++
drivers/dma/qcom/hidma_dbg.c | 219 +++++
drivers/dma/qcom/hidma_ll.c | 927 +++++++++++++++++++++
drivers/dma/qcom/hidma_mgmt.c | 317 +++++++
drivers/dma/qcom/hidma_mgmt.h | 39 +
drivers/dma/qcom/hidma_mgmt_sys.c | 295 +++++++
15 files changed, 3051 insertions(+), 12 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-platform-hidma
create mode 100644 Documentation/ABI/testing/sysfs-platform-hidma-mgmt
create mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
create mode 100644 drivers/dma/qcom/Kconfig
create mode 100644 drivers/dma/qcom/Makefile
rename drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} (99%)
create mode 100644 drivers/dma/qcom/hidma.c
create mode 100644 drivers/dma/qcom/hidma.h
create mode 100644 drivers/dma/qcom/hidma_dbg.c
create mode 100644 drivers/dma/qcom/hidma_ll.c
create mode 100644 drivers/dma/qcom/hidma_mgmt.c
create mode 100644 drivers/dma/qcom/hidma_mgmt.h
create mode 100644 drivers/dma/qcom/hidma_mgmt_sys.c
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
next reply other threads:[~2015-12-17 17:01 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-17 17:01 Sinan Kaya [this message]
2015-12-17 17:01 ` [PATCH V10 1/7] dma: qcom_bam_dma: move to qcom directory Sinan Kaya
2015-12-17 17:01 ` [PATCH V10 2/7] dma: hidma: Add Device Tree support Sinan Kaya
2015-12-19 4:17 ` Rob Herring
2015-12-21 22:01 ` Okaya
2015-12-17 17:01 ` [PATCH V10 3/7] dma: add Qualcomm Technologies HIDMA management driver Sinan Kaya
2015-12-17 17:01 ` [PATCH V10 4/7] dma: add Qualcomm Technologies HIDMA channel driver Sinan Kaya
2015-12-17 17:01 ` [PATCH V10 5/7] dma: qcom_hidma: implement lower level hardware interface Sinan Kaya
2015-12-17 17:01 ` [PATCH V10 6/7] dma: qcom_hidma: add debugfs hooks Sinan Kaya
2015-12-17 17:01 ` [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy Sinan Kaya
2015-12-19 7:14 ` kbuild test robot
2015-12-19 7:37 ` kbuild test robot
2015-12-21 22:05 ` Okaya
[not found] ` <1450371684-23415-8-git-send-email-okaya-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-12-19 18:37 ` Andy Shevchenko
2015-12-21 22:05 ` Timur Tabi
2015-12-30 15:28 ` Sinan Kaya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450371684-23415-1-git-send-email-okaya@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=arnd@arndb.de \
--cc=cov@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=jcm@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=timur@codeaurora.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).