devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Xing Zheng <zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Xing Zheng <zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	keescook-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	leozwang-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org
Subject: [PATCH 4/4] ARM: dts: rockchip: Add support emac for RK3036
Date: Wed, 23 Dec 2015 17:19:50 +0800	[thread overview]
Message-ID: <1450862390-407-4-git-send-email-zhengxing@rock-chips.com> (raw)
In-Reply-To: <1450862390-407-1-git-send-email-zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

This patch describe the emac, and we need to let mac clock under
the APLL which is able to provide the accurate 50MHz what mac_ref
need.

Signed-off-by: Xing Zheng <zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---

 arch/arm/boot/dts/rk3036-evb.dts   |   25 +++++++++++++++++++++++++
 arch/arm/boot/dts/rk3036-kylin.dts |   23 +++++++++++++++++++++++
 arch/arm/boot/dts/rk3036.dtsi      |   32 ++++++++++++++++++++++++++++++++
 3 files changed, 80 insertions(+)

diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 28a0336..69b96e6 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -62,3 +62,28 @@
 &uart2 {
 	status = "okay";
 };
+
+&emac {
+	assigned-clocks = <&cru SCLK_MACPLL>;
+	assigned-clock-parents = <&cru PLL_APLL>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
+	phy = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	emac {
+		rmii_rst: rmii-rst {
+			rockchip,pins = <2 22 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 992f9ca..3fb1cfe 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -285,7 +285,24 @@
 	status = "okay";
 };
 
+&emac {
+	assigned-clocks = <&cru SCLK_MACPLL>;
+	assigned-clock-parents = <&cru PLL_APLL>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
+	phy = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
 &pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
@@ -297,4 +314,10 @@
 			rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
 		};
 	};
+
+	emac {
+		rmii_rst: rmii-rst {
+			rockchip,pins = <2 22 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index b9567c1..0c09fb3 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -186,6 +186,20 @@
 		status = "disabled";
 	};
 
+	emac: ethernet@10200000 {
+		compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+		reg = <0x10200000 0x4000>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rockchip,grf = <&grf>;
+		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
+		clock-names = "hclk", "macref", "macclk";
+		max-speed = <100>;
+		phy-mode = "rmii";
+		status = "disabled";
+	};
+
 	sdmmc: dwmmc@10214000 {
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10214000 0x4000>;
@@ -556,6 +570,24 @@
 			};
 		};
 
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_none>, /* crs_dvalid */
+						<2 13 RK_FUNC_1 &pcfg_pull_none>, /* tx_en */
+						<2 14 RK_FUNC_1 &pcfg_pull_none>, /* mac_clk */
+						<2 15 RK_FUNC_1 &pcfg_pull_none>, /* rx_err */
+						<2 16 RK_FUNC_1 &pcfg_pull_none>, /* rxd1 */
+						<2 17 RK_FUNC_1 &pcfg_pull_none>, /* rxd0 */
+						<2 18 RK_FUNC_1 &pcfg_pull_none>, /* txd1 */
+						<2 19 RK_FUNC_1 &pcfg_pull_none>; /* txd0 */
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_none>, /* mac_md */
+						<2 25 RK_FUNC_1 &pcfg_pull_none>; /* mac_mdclk */
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
-- 
1.7.9.5

       reply	other threads:[~2015-12-23  9:19 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1450862390-407-1-git-send-email-zhengxing@rock-chips.com>
     [not found] ` <1450862390-407-1-git-send-email-zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-12-23  9:19   ` Xing Zheng [this message]
     [not found]     ` <1450862390-407-4-git-send-email-zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-12-23 19:52       ` [PATCH 4/4] ARM: dts: rockchip: Add support emac for RK3036 kbuild test robot
2015-12-25  2:36       ` Caesar Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450862390-407-4-git-send-email-zhengxing@rock-chips.com \
    --to=zhengxing-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=keescook-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=leozwang-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).