From: Bhupesh Sharma <bhupesh.sharma@freescale.com>
To: arm@kernel.org, shawnguo@kernel.org, arnd@arndb.de,
mark.rutland@arm.com, linux-arm-kernel@lists.infradead.org,
olof@lixom.net, devicetree@vger.kernel.org, robh@kernel.org,
will.deacon@arm.com
Cc: LeoLi@freescale.com, bhupesh.sharma@freescale.com,
Catalin.Marinas@arm.com, stuart.yoder@freescale.com,
scottwood@freescale.com, bhupesh.linux@gmail.com
Subject: [PATCH v4 2/2] dts/ls2080a: Update DTSI to add support of SP805 WDT
Date: Mon, 28 Dec 2015 15:31:24 +0530 [thread overview]
Message-ID: <1451296884-7932-3-git-send-email-bhupesh.sharma@freescale.com> (raw)
In-Reply-To: <1451296884-7932-1-git-send-email-bhupesh.sharma@freescale.com>
This patch updates the LS2080a DTSI (DTS Include) file to add
support for eight SP805 Watchdog units which can be used to
reset the eight Cortex-A57 cores available on LS2080A.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
---
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 56 ++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index e81cd48..7b0f411 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -193,6 +193,62 @@
interrupts = <0 32 0x4>; /* Level high type */
};
+ cluster1_core0_watchdog: wdt@c000000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc000000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster1_core1_watchdog: wdt@c010000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc010000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core0_watchdog: wdt@c100000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc100000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core1_watchdog: wdt@c110000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc110000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster3_core0_watchdog: wdt@c200000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc200000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster3_core1_watchdog: wdt@c210000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc210000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster4_core0_watchdog: wdt@c300000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc300000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster4_core1_watchdog: wdt@c310000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc310000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
fsl_mc: fsl-mc@80c000000 {
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
--
1.7.9.5
next prev parent reply other threads:[~2015-12-28 10:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-28 10:01 [PATCH v4 0/2] ARM64: Enable SP805 WDT support for FSL LS2080A Bhupesh Sharma
2015-12-28 10:01 ` [PATCH v4 1/2] Documentation: DT: Add entry for ARM SP805-WDT Bhupesh Sharma
2015-12-28 10:01 ` Bhupesh Sharma [this message]
2015-12-31 15:41 ` [PATCH v4 0/2] ARM64: Enable SP805 WDT support for FSL LS2080A Arnd Bergmann
[not found] ` <1451296884-7932-1-git-send-email-bhupesh.sharma-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2016-04-14 15:48 ` Marc Zyngier
2016-04-19 12:09 ` Bhupesh Sharma
[not found] ` <VI1PR04MB12308B0964726B5D1A4492BE886C0-mr6QIVyDiCG4zNWkhB+yk89NdZoXdze2vxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2016-04-19 16:36 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1451296884-7932-3-git-send-email-bhupesh.sharma@freescale.com \
--to=bhupesh.sharma@freescale.com \
--cc=Catalin.Marinas@arm.com \
--cc=LeoLi@freescale.com \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=bhupesh.linux@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=robh@kernel.org \
--cc=scottwood@freescale.com \
--cc=shawnguo@kernel.org \
--cc=stuart.yoder@freescale.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).