From mboxrd@z Thu Jan 1 00:00:00 1970 From: Javier Martinez Canillas Subject: [PATCH 10/10] [media] tvp5150: Configure data interface via pdata or DT Date: Mon, 4 Jan 2016 09:25:32 -0300 Message-ID: <1451910332-23385-11-git-send-email-javier@osg.samsung.com> References: <1451910332-23385-1-git-send-email-javier@osg.samsung.com> Return-path: In-Reply-To: <1451910332-23385-1-git-send-email-javier@osg.samsung.com> Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org, Mauro Carvalho Chehab , Enrico Butera , Sakari Ailus , Enric Balletbo i Serra , Rob Herring , Eduard Gavin , Laurent Pinchart , Hans Verkuil , linux-media@vger.kernel.org, Javier Martinez Canillas List-Id: devicetree@vger.kernel.org The video decoder supports either 8-bit 4:2:2 YUV with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output format but currently BT.656 it's always reported. Allow to configure the format to use via either platform data or a device tree definition. Signed-off-by: Javier Martinez Canillas --- drivers/media/i2c/tvp5150.c | 61 +++++++++++++++++++++++++++++++++++++++++++-- include/media/i2c/tvp5150.h | 5 ++++ 2 files changed, 64 insertions(+), 2 deletions(-) diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c index fed89a811ab7..8bce45a6e264 100644 --- a/drivers/media/i2c/tvp5150.c +++ b/drivers/media/i2c/tvp5150.c @@ -6,6 +6,7 @@ */ #include +#include #include #include #include @@ -15,6 +16,7 @@ #include #include #include +#include #include "tvp5150_reg.h" @@ -39,6 +41,7 @@ struct tvp5150 { struct media_pad pad; struct v4l2_ctrl_handler hdl; struct v4l2_rect rect; + struct tvp5150_platform_data *pdata; v4l2_std_id norm; /* Current set standard */ u32 input; @@ -757,6 +760,7 @@ static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std) static int tvp5150_reset(struct v4l2_subdev *sd, u32 val) { struct tvp5150 *decoder = to_tvp5150(sd); + struct tvp5150_platform_data *pdata = decoder->pdata; /* Initializes TVP5150 to its default values */ tvp5150_write_inittab(sd, tvp5150_init_default); @@ -774,6 +778,10 @@ static int tvp5150_reset(struct v4l2_subdev *sd, u32 val) v4l2_ctrl_handler_setup(&decoder->hdl); tvp5150_set_std(sd, decoder->norm); + + if (pdata && pdata->bus_type == V4L2_MBUS_PARALLEL) + tvp5150_write(sd, TVP5150_DATA_RATE_SEL, 0x40); + return 0; }; @@ -940,6 +948,16 @@ static int tvp5150_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) static int tvp5150_g_mbus_config(struct v4l2_subdev *sd, struct v4l2_mbus_config *cfg) { + struct tvp5150_platform_data *pdata = to_tvp5150(sd)->pdata; + + if (pdata) { + cfg->type = pdata->bus_type; + cfg->flags = pdata->parallel_flags; + + return 0; + } + + /* Default values if no platform data was provided */ cfg->type = V4L2_MBUS_BT656; cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_FIELD_EVEN_LOW | V4L2_MBUS_DATA_ACTIVE_HIGH; @@ -986,13 +1004,20 @@ static int tvp5150_enum_frame_size(struct v4l2_subdev *sd, static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable) { + struct tvp5150_platform_data *pdata = to_tvp5150(sd)->pdata; + /* Output format: 8-bit ITU-R BT.656 with embedded syncs */ + int val = 0x09; + + /* Output format: 8-bit 4:2:2 YUV with discrete sync */ + if (pdata && pdata->bus_type == V4L2_MBUS_PARALLEL) + val = 0x0d; + /* Initializes TVP5150 to its default values */ /* # set PCLK (27MHz) */ tvp5150_write(sd, TVP5150_CONF_SHARED_PIN, 0x00); - /* Output format: 8-bit ITU-R BT.656 with embedded syncs */ if (enable) - tvp5150_write(sd, TVP5150_MISC_CTL, 0x09); + tvp5150_write(sd, TVP5150_MISC_CTL, val); else tvp5150_write(sd, TVP5150_MISC_CTL, 0x00); @@ -1228,11 +1253,42 @@ static inline int tvp5150_init(struct i2c_client *c) return 0; } +static struct tvp5150_platform_data *tvp5150_get_pdata(struct device *dev) +{ + struct tvp5150_platform_data *pdata = dev_get_platdata(dev); + struct v4l2_of_endpoint bus_cfg; + struct device_node *ep; + + if (pdata) + return pdata; + + if (IS_ENABLED(CONFIG_OF) && dev->of_node) { + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + ep = of_graph_get_next_endpoint(dev->of_node, NULL); + if (!ep) + return NULL; + + v4l2_of_parse_endpoint(ep, &bus_cfg); + + pdata->bus_type = bus_cfg.bus_type; + pdata->parallel_flags = bus_cfg.bus.parallel.flags; + + of_node_put(ep); + return pdata; + } + + return NULL; +} + static int tvp5150_probe(struct i2c_client *c, const struct i2c_device_id *id) { struct tvp5150 *core; struct v4l2_subdev *sd; + struct tvp5150_platform_data *pdata = tvp5150_get_pdata(&c->dev); int res; /* Check if the adapter supports the needed features */ @@ -1262,6 +1318,7 @@ static int tvp5150_probe(struct i2c_client *c, if (res < 0) return res; + core->pdata = pdata; core->norm = V4L2_STD_ALL; /* Default is autodetect */ core->input = TVP5150_COMPOSITE1; core->enable = 1; diff --git a/include/media/i2c/tvp5150.h b/include/media/i2c/tvp5150.h index 649908a25605..e4cda0c843df 100644 --- a/include/media/i2c/tvp5150.h +++ b/include/media/i2c/tvp5150.h @@ -30,4 +30,9 @@ #define TVP5150_NORMAL 0 #define TVP5150_BLACK_SCREEN 1 +struct tvp5150_platform_data { + enum v4l2_mbus_type bus_type; + unsigned int parallel_flags; +}; + #endif -- 2.4.3