* [PATCH v2 0/6] Add clock support for Mediatek MT2701
@ 2016-01-05 6:30 James Liao
[not found] ` <1451975422-31174-1-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
` (2 more replies)
0 siblings, 3 replies; 14+ messages in thread
From: James Liao @ 2016-01-05 6:30 UTC (permalink / raw)
To: Matthias Brugger, Mike Turquette, Stephen Boyd
Cc: Sascha Hauer, Daniel Kurtz, Philipp Zabel, srv_heupstream,
devicetree, linux-arm-kernel, linux-kernel, linux-mediatek,
linux-clk
This patchset is based on 4.4-rc7, add clock and reset controller support
for Mediatek MT2701.
This patchset also refined makefile and Kconfig to support configurable
multiple SoC clock support.
changes since v1:
- Document MT2701 compatible strings.
James Liao (2):
clk: mediatek: Refine the makefile to support multiple clock drivers
dt-bindings: ARM: Mediatek: Document bindings for MT2701
Shunli Wang (4):
clk: mediatek: Add dt-bindings for MT2701 clocks
clk: mediatek: Add MT2701 clock support
reset: mediatek: mt2701 reset controller dt-binding file
reset: mediatek: mt2701 reset driver
.../bindings/arm/mediatek/mediatek,apmixedsys.txt | 1 +
.../bindings/arm/mediatek/mediatek,bdpsys.txt | 22 +
.../bindings/arm/mediatek/mediatek,ethsys.txt | 22 +
.../bindings/arm/mediatek/mediatek,hifsys.txt | 22 +
.../bindings/arm/mediatek/mediatek,imgsys.txt | 1 +
.../bindings/arm/mediatek/mediatek,infracfg.txt | 1 +
.../bindings/arm/mediatek/mediatek,mmsys.txt | 1 +
.../bindings/arm/mediatek/mediatek,pericfg.txt | 1 +
.../bindings/arm/mediatek/mediatek,topckgen.txt | 1 +
.../bindings/arm/mediatek/mediatek,vdecsys.txt | 1 +
drivers/clk/Kconfig | 1 +
drivers/clk/mediatek/Kconfig | 31 +
drivers/clk/mediatek/Makefile | 7 +-
drivers/clk/mediatek/clk-gate.c | 56 +
drivers/clk/mediatek/clk-gate.h | 2 +
drivers/clk/mediatek/clk-mt2701.c | 1214 ++++++++++++++++++++
drivers/clk/mediatek/clk-mtk.c | 25 +
drivers/clk/mediatek/clk-mtk.h | 35 +-
include/dt-bindings/clock/mt2701-clk.h | 481 ++++++++
.../dt-bindings/reset-controller/mt2701-resets.h | 74 ++
20 files changed, 1993 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
create mode 100644 drivers/clk/mediatek/Kconfig
create mode 100644 drivers/clk/mediatek/clk-mt2701.c
create mode 100644 include/dt-bindings/clock/mt2701-clk.h
create mode 100644 include/dt-bindings/reset-controller/mt2701-resets.h
--
1.9.1
^ permalink raw reply [flat|nested] 14+ messages in thread[parent not found: <1451975422-31174-1-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>]
* [PATCH v2 1/6] clk: mediatek: Refine the makefile to support multiple clock drivers [not found] ` <1451975422-31174-1-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> @ 2016-01-05 6:30 ` James Liao 2016-01-05 6:30 ` [PATCH v2 3/6] clk: mediatek: Add dt-bindings for MT2701 clocks James Liao ` (2 subsequent siblings) 3 siblings, 0 replies; 14+ messages in thread From: James Liao @ 2016-01-05 6:30 UTC (permalink / raw) To: Matthias Brugger, Mike Turquette, Stephen Boyd Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Sascha Hauer, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, James Liao, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Shunli Wang, Philipp Zabel, linux-clk-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r Add a Kconfig to define clock configuration for each SoC, and modify the Makefile to build drivers that only selected in config. Signed-off-by: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- drivers/clk/Kconfig | 1 + drivers/clk/mediatek/Kconfig | 23 +++++++++++++++++++++++ drivers/clk/mediatek/Makefile | 6 +++--- 3 files changed, 27 insertions(+), 3 deletions(-) create mode 100644 drivers/clk/mediatek/Kconfig diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index c3e3a02..b7a37dc 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -198,3 +198,4 @@ source "drivers/clk/mvebu/Kconfig" source "drivers/clk/samsung/Kconfig" source "drivers/clk/tegra/Kconfig" +source "drivers/clk/mediatek/Kconfig" diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig new file mode 100644 index 0000000..dc224e6 --- /dev/null +++ b/drivers/clk/mediatek/Kconfig @@ -0,0 +1,23 @@ +# +# MediaTek SoC drivers +# +config COMMON_CLK_MEDIATEK + bool + ---help--- + Mediatek SoCs' clock support. + +config COMMON_CLK_MT8135 + bool "Clock driver for Mediatek MT8135" + depends on COMMON_CLK + select COMMON_CLK_MEDIATEK + default ARCH_MEDIATEK + ---help--- + This driver supports Mediatek MT8135 clocks. + +config COMMON_CLK_MT8173 + bool "Clock driver for Mediatek MT8173" + depends on COMMON_CLK + select COMMON_CLK_MEDIATEK + default ARCH_MEDIATEK + ---help--- + This driver supports Mediatek MT8173 clocks. diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile index 95fdfac..32e7222 100644 --- a/drivers/clk/mediatek/Makefile +++ b/drivers/clk/mediatek/Makefile @@ -1,4 +1,4 @@ -obj-y += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o +obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o obj-$(CONFIG_RESET_CONTROLLER) += reset.o -obj-y += clk-mt8135.o -obj-y += clk-mt8173.o +obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o +obj-$(CONFIG_COMMON_CLK_MT8173) += clk-mt8173.o -- 1.9.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 3/6] clk: mediatek: Add dt-bindings for MT2701 clocks [not found] ` <1451975422-31174-1-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> 2016-01-05 6:30 ` [PATCH v2 1/6] clk: mediatek: Refine the makefile to support multiple clock drivers James Liao @ 2016-01-05 6:30 ` James Liao 2016-01-05 6:30 ` [PATCH v2 4/6] clk: mediatek: Add MT2701 clock support James Liao 2016-01-05 6:30 ` [PATCH v2 5/6] reset: mediatek: mt2701 reset controller dt-binding file James Liao 3 siblings, 0 replies; 14+ messages in thread From: James Liao @ 2016-01-05 6:30 UTC (permalink / raw) To: Matthias Brugger, Mike Turquette, Stephen Boyd Cc: Sascha Hauer, Daniel Kurtz, Philipp Zabel, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-clk-u79uwXL29TY76Z2rM5mHXA, Shunli Wang, James Liao From: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> Add MT2701 clock dt-bindings, include topckgen, apmixedsys, infracfg, pericfg and subsystem clocks. Signed-off-by: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- include/dt-bindings/clock/mt2701-clk.h | 481 +++++++++++++++++++++++++++++++++ 1 file changed, 481 insertions(+) create mode 100644 include/dt-bindings/clock/mt2701-clk.h diff --git a/include/dt-bindings/clock/mt2701-clk.h b/include/dt-bindings/clock/mt2701-clk.h new file mode 100644 index 0000000..50972d1 --- /dev/null +++ b/include/dt-bindings/clock/mt2701-clk.h @@ -0,0 +1,481 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_MT2701_H +#define _DT_BINDINGS_CLK_MT2701_H + +/* TOPCKGEN */ +#define CLK_TOP_SYSPLL 1 +#define CLK_TOP_SYSPLL_D2 2 +#define CLK_TOP_SYSPLL_D3 3 +#define CLK_TOP_SYSPLL_D5 4 +#define CLK_TOP_SYSPLL_D7 5 +#define CLK_TOP_SYSPLL1_D2 6 +#define CLK_TOP_SYSPLL1_D4 7 +#define CLK_TOP_SYSPLL1_D8 8 +#define CLK_TOP_SYSPLL1_D16 9 +#define CLK_TOP_SYSPLL2_D2 10 +#define CLK_TOP_SYSPLL2_D4 11 +#define CLK_TOP_SYSPLL2_D8 12 +#define CLK_TOP_SYSPLL3_D2 13 +#define CLK_TOP_SYSPLL3_D4 14 +#define CLK_TOP_SYSPLL4_D2 15 +#define CLK_TOP_SYSPLL4_D4 16 +#define CLK_TOP_UNIVPLL 17 +#define CLK_TOP_UNIVPLL_D2 18 +#define CLK_TOP_UNIVPLL_D3 19 +#define CLK_TOP_UNIVPLL_D5 20 +#define CLK_TOP_UNIVPLL_D7 21 +#define CLK_TOP_UNIVPLL_D26 22 +#define CLK_TOP_UNIVPLL_D52 23 +#define CLK_TOP_UNIVPLL_D108 24 +#define CLK_TOP_USB_PHY48M 25 +#define CLK_TOP_UNIVPLL1_D2 26 +#define CLK_TOP_UNIVPLL1_D4 27 +#define CLK_TOP_UNIVPLL1_D8 28 +#define CLK_TOP_UNIVPLL2_D2 29 +#define CLK_TOP_UNIVPLL2_D4 30 +#define CLK_TOP_UNIVPLL2_D8 31 +#define CLK_TOP_UNIVPLL2_D16 32 +#define CLK_TOP_UNIVPLL2_D32 33 +#define CLK_TOP_UNIVPLL3_D2 34 +#define CLK_TOP_UNIVPLL3_D4 35 +#define CLK_TOP_UNIVPLL3_D8 36 +#define CLK_TOP_MSDCPLL 37 +#define CLK_TOP_MSDCPLL_D2 38 +#define CLK_TOP_MSDCPLL_D4 39 +#define CLK_TOP_MSDCPLL_D8 40 +#define CLK_TOP_MMPLL 41 +#define CLK_TOP_MMPLL_D2 42 +#define CLK_TOP_DMPLL 43 +#define CLK_TOP_DMPLL_D2 44 +#define CLK_TOP_DMPLL_D4 45 +#define CLK_TOP_DMPLL_X2 46 +#define CLK_TOP_TVDPLL 47 +#define CLK_TOP_TVDPLL_D2 48 +#define CLK_TOP_TVDPLL_D4 49 +#define CLK_TOP_TVD2PLL 50 +#define CLK_TOP_TVD2PLL_D2 51 +#define CLK_TOP_HADDS2PLL_98M 52 +#define CLK_TOP_HADDS2PLL_294M 53 +#define CLK_TOP_HADDS2_FB 54 +#define CLK_TOP_MIPIPLL_D2 55 +#define CLK_TOP_MIPIPLL_D4 56 +#define CLK_TOP_HDMIPLL 57 +#define CLK_TOP_HDMIPLL_D2 58 +#define CLK_TOP_HDMIPLL_D3 59 +#define CLK_TOP_HDMI_SCL_RX 60 +#define CLK_TOP_HDMI_0_PIX340M 61 +#define CLK_TOP_HDMI_0_DEEP340M 62 +#define CLK_TOP_HDMI_0_PLL340M 63 +#define CLK_TOP_AUD1PLL_98M 64 +#define CLK_TOP_AUD2PLL_90M 65 +#define CLK_TOP_AUDPLL 66 +#define CLK_TOP_AUDPLL_D4 67 +#define CLK_TOP_AUDPLL_D8 68 +#define CLK_TOP_AUDPLL_D16 69 +#define CLK_TOP_AUDPLL_D24 70 +#define CLK_TOP_ETHPLL_500M 71 +#define CLK_TOP_VDECPLL 72 +#define CLK_TOP_VENCPLL 73 +#define CLK_TOP_MIPIPLL 74 +#define CLK_TOP_ARMPLL_1P3G 75 + +#define CLK_TOP_MM_SEL 76 +#define CLK_TOP_DDRPHYCFG_SEL 77 +#define CLK_TOP_MEM_SEL 78 +#define CLK_TOP_AXI_SEL 79 +#define CLK_TOP_CAMTG_SEL 80 +#define CLK_TOP_MFG_SEL 81 +#define CLK_TOP_VDEC_SEL 82 +#define CLK_TOP_PWM_SEL 83 +#define CLK_TOP_MSDC30_0_SEL 84 +#define CLK_TOP_USB20_SEL 85 +#define CLK_TOP_SPI0_SEL 86 +#define CLK_TOP_UART_SEL 87 +#define CLK_TOP_AUDINTBUS_SEL 88 +#define CLK_TOP_AUDIO_SEL 89 +#define CLK_TOP_MSDC30_2_SEL 90 +#define CLK_TOP_MSDC30_1_SEL 91 +#define CLK_TOP_DPI1_SEL 92 +#define CLK_TOP_DPI0_SEL 93 +#define CLK_TOP_SCP_SEL 94 +#define CLK_TOP_PMICSPI_SEL 95 +#define CLK_TOP_APLL_SEL 96 +#define CLK_TOP_HDMI_SEL 97 +#define CLK_TOP_TVE_SEL 98 +#define CLK_TOP_EMMC_HCLK_SEL 99 +#define CLK_TOP_NFI2X_SEL 100 +#define CLK_TOP_RTC_SEL 101 +#define CLK_TOP_OSD_SEL 102 +#define CLK_TOP_NR_SEL 103 +#define CLK_TOP_DI_SEL 104 +#define CLK_TOP_FLASH_SEL 105 +#define CLK_TOP_ASM_M_SEL 106 +#define CLK_TOP_ASM_I_SEL 107 +#define CLK_TOP_INTDIR_SEL 108 +#define CLK_TOP_HDMIRX_BIST_SEL 109 +#define CLK_TOP_ETHIF_SEL 110 +#define CLK_TOP_MS_CARD_SEL 111 +#define CLK_TOP_ASM_H_SEL 112 +#define CLK_TOP_SPI1_SEL 113 +#define CLK_TOP_CMSYS_SEL 114 +#define CLK_TOP_MSDC30_3_SEL 115 +#define CLK_TOP_HDMIRX26_24_SEL 116 +#define CLK_TOP_AUD2DVD_SEL 117 +#define CLK_TOP_8BDAC_SEL 118 +#define CLK_TOP_SPI2_SEL 119 +#define CLK_TOP_AUD_MUX1_SEL 120 +#define CLK_TOP_AUD_MUX2_SEL 121 +#define CLK_TOP_AUDPLL_MUX_SEL 122 +#define CLK_TOP_AUD_K1_SRC_SEL 123 +#define CLK_TOP_AUD_K2_SRC_SEL 124 +#define CLK_TOP_AUD_K3_SRC_SEL 125 +#define CLK_TOP_AUD_K4_SRC_SEL 126 +#define CLK_TOP_AUD_K5_SRC_SEL 127 +#define CLK_TOP_AUD_K6_SRC_SEL 128 +#define CLK_TOP_PADMCLK_SEL 129 +#define CLK_TOP_AUD_EXTCK1_DIV 130 +#define CLK_TOP_AUD_EXTCK2_DIV 131 +#define CLK_TOP_AUD_MUX1_DIV 132 +#define CLK_TOP_AUD_MUX2_DIV 133 +#define CLK_TOP_AUD_K1_SRC_DIV 134 +#define CLK_TOP_AUD_K2_SRC_DIV 135 +#define CLK_TOP_AUD_K3_SRC_DIV 136 +#define CLK_TOP_AUD_K4_SRC_DIV 137 +#define CLK_TOP_AUD_K5_SRC_DIV 138 +#define CLK_TOP_AUD_K6_SRC_DIV 139 +#define CLK_TOP_AUD_I2S1_MCLK 140 +#define CLK_TOP_AUD_I2S2_MCLK 141 +#define CLK_TOP_AUD_I2S3_MCLK 142 +#define CLK_TOP_AUD_I2S4_MCLK 143 +#define CLK_TOP_AUD_I2S5_MCLK 144 +#define CLK_TOP_AUD_I2S6_MCLK 145 +#define CLK_TOP_AUD_48K_TIMING 146 +#define CLK_TOP_AUD_44K_TIMING 147 + +#define CLK_TOP_32K_INTERNAL 148 +#define CLK_TOP_32K_EXTERNAL 149 +#define CLK_TOP_CLK26M_D8 150 +#define CLK_TOP_8BDAC 151 +#define CLK_TOP_WBG_DIG_416M 152 +#define CLK_TOP_DPI 153 +#define CLK_TOP_HDMITX_CLKDIG_CTS 154 +#define CLK_TOP_NR 155 + +/* APMIXEDSYS */ + +#define CLK_APMIXED_ARMPLL 1 +#define CLK_APMIXED_MAINPLL 2 +#define CLK_APMIXED_UNIVPLL 3 +#define CLK_APMIXED_MMPLL 4 +#define CLK_APMIXED_MSDCPLL 5 +#define CLK_APMIXED_TVDPLL 6 +#define CLK_APMIXED_AUD1PLL 7 +#define CLK_APMIXED_TRGPLL 8 +#define CLK_APMIXED_ETHPLL 9 +#define CLK_APMIXED_VDECPLL 10 +#define CLK_APMIXED_HADDS2PLL 11 +#define CLK_APMIXED_AUD2PLL 12 +#define CLK_APMIXED_TVD2PLL 13 +#define CLK_APMIXED_NR 14 + +/* DDRPHY */ + +#define CLK_DDRPHY_VENCPLL 1 +#define CLK_DDRPHY_NR 2 + +/* INFRACFG */ + +#define CLK_INFRA_DBG 1 +#define CLK_INFRA_SMI 2 +#define CLK_INFRA_QAXI_CM4 3 +#define CLK_INFRA_AUD_SPLIN_B 4 +#define CLK_INFRA_AUDIO 5 +#define CLK_INFRA_EFUSE 6 +#define CLK_INFRA_L2C_SRAM 7 +#define CLK_INFRA_M4U 8 +#define CLK_INFRA_CONNMCU 9 +#define CLK_INFRA_TRNG 10 +#define CLK_INFRA_RAMBUFIF 11 +#define CLK_INFRA_CPUM 12 +#define CLK_INFRA_KP 13 +#define CLK_INFRA_CEC 14 +#define CLK_INFRA_IRRX 15 +#define CLK_INFRA_PMICSPI 16 +#define CLK_INFRA_PMICWRAP 17 +#define CLK_INFRA_DDCCI 18 +#define CLK_INFRA_CLK_13M 19 +#define CLK_INFRA_NR 20 + +/* PERICFG */ + +#define CLK_PERI_NFI 1 +#define CLK_PERI_THERM 2 +#define CLK_PERI_PWM1 3 +#define CLK_PERI_PWM2 4 +#define CLK_PERI_PWM3 5 +#define CLK_PERI_PWM4 6 +#define CLK_PERI_PWM5 7 +#define CLK_PERI_PWM6 8 +#define CLK_PERI_PWM7 9 +#define CLK_PERI_PWM 10 +#define CLK_PERI_USB0 11 +#define CLK_PERI_USB1 12 +#define CLK_PERI_AP_DMA 13 +#define CLK_PERI_MSDC30_0 14 +#define CLK_PERI_MSDC30_1 15 +#define CLK_PERI_MSDC30_2 16 +#define CLK_PERI_MSDC30_3 17 +#define CLK_PERI_MSDC50_3 18 +#define CLK_PERI_NLI 19 +#define CLK_PERI_UART0 20 +#define CLK_PERI_UART1 21 +#define CLK_PERI_UART2 22 +#define CLK_PERI_UART3 23 +#define CLK_PERI_BTIF 24 +#define CLK_PERI_I2C0 25 +#define CLK_PERI_I2C1 26 +#define CLK_PERI_I2C2 27 +#define CLK_PERI_I2C3 28 +#define CLK_PERI_AUXADC 29 +#define CLK_PERI_SPI0 30 +#define CLK_PERI_ETH 31 +#define CLK_PERI_USB0_MCU 32 + +#define CLK_PERI_USB1_MCU 33 +#define CLK_PERI_USB_SLV 34 +#define CLK_PERI_GCPU 35 +#define CLK_PERI_NFI_ECC 36 +#define CLK_PERI_NFI_PAD 37 +#define CLK_PERI_FLASH 38 +#define CLK_PERI_HOST89_INT 39 +#define CLK_PERI_HOST89_SPI 40 +#define CLK_PERI_HOST89_DVD 41 +#define CLK_PERI_SPI1 42 +#define CLK_PERI_SPI2 43 +#define CLK_PERI_FCI 44 + +#define CLK_PERI_UART0_SEL 45 +#define CLK_PERI_UART1_SEL 46 +#define CLK_PERI_UART2_SEL 47 +#define CLK_PERI_UART3_SEL 48 +#define CLK_PERI_NR 49 + +/* AUDIO */ + +#define CLK_AUD_AFE 1 +#define CLK_AUD_LRCK_DETECT 2 +#define CLK_AUD_I2S 3 +#define CLK_AUD_APLL_TUNER 4 +#define CLK_AUD_HDMI 5 +#define CLK_AUD_SPDF 6 +#define CLK_AUD_SPDF2 7 +#define CLK_AUD_APLL 8 +#define CLK_AUD_TML 9 +#define CLK_AUD_AHB_IDLE_EXT 10 +#define CLK_AUD_AHB_IDLE_INT 11 + +#define CLK_AUD_I2SIN1 12 +#define CLK_AUD_I2SIN2 13 +#define CLK_AUD_I2SIN3 14 +#define CLK_AUD_I2SIN4 15 +#define CLK_AUD_I2SIN5 16 +#define CLK_AUD_I2SIN6 17 +#define CLK_AUD_I2SO1 18 +#define CLK_AUD_I2SO2 19 +#define CLK_AUD_I2SO3 20 +#define CLK_AUD_I2SO4 21 +#define CLK_AUD_I2SO5 22 +#define CLK_AUD_I2SO6 23 +#define CLK_AUD_ASRCI1 24 +#define CLK_AUD_ASRCI2 25 +#define CLK_AUD_ASRCO1 26 +#define CLK_AUD_ASRCO2 27 +#define CLK_AUD_ASRC11 28 +#define CLK_AUD_ASRC12 29 +#define CLK_AUD_HDMIRX 30 +#define CLK_AUD_INTDIR 31 +#define CLK_AUD_A1SYS 32 +#define CLK_AUD_A2SYS 33 +#define CLK_AUD_AFE_CONN 34 +#define CLK_AUD_AFE_PCMIF 35 +#define CLK_AUD_AFE_MRGIF 36 + +#define CLK_AUD_MMIF_UL1 37 +#define CLK_AUD_MMIF_UL2 38 +#define CLK_AUD_MMIF_UL3 39 +#define CLK_AUD_MMIF_UL4 40 +#define CLK_AUD_MMIF_UL5 41 +#define CLK_AUD_MMIF_UL6 42 +#define CLK_AUD_MMIF_DL1 43 +#define CLK_AUD_MMIF_DL2 44 +#define CLK_AUD_MMIF_DL3 45 +#define CLK_AUD_MMIF_DL4 46 +#define CLK_AUD_MMIF_DL5 47 +#define CLK_AUD_MMIF_DL6 48 +#define CLK_AUD_MMIF_DLMCH 49 +#define CLK_AUD_MMIF_ARB1 50 +#define CLK_AUD_MMIF_AWB1 51 +#define CLK_AUD_MMIF_AWB2 52 +#define CLK_AUD_MMIF_DAI 53 + +#define CLK_AUD_DMIC1 54 +#define CLK_AUD_DMIC2 55 +#define CLK_AUD_ASRCI3 56 +#define CLK_AUD_ASRCI4 57 +#define CLK_AUD_ASRCI5 58 +#define CLK_AUD_ASRCI6 59 +#define CLK_AUD_ASRCO3 60 +#define CLK_AUD_ASRCO4 61 +#define CLK_AUD_ASRCO5 62 +#define CLK_AUD_ASRCO6 63 +#define CLK_AUD_MEM_ASRC1 64 +#define CLK_AUD_MEM_ASRC2 65 +#define CLK_AUD_MEM_ASRC3 66 +#define CLK_AUD_MEM_ASRC4 67 +#define CLK_AUD_MEM_ASRC5 68 +#define CLK_AUD_DSD_ENC 69 +#define CLK_AUD_ASRC_BRG 70 +#define CLK_AUD_NR 71 + +/* MMSYS */ + +#define CLK_MM_SMI_COMMON 1 +#define CLK_MM_SMI_LARB0 2 +#define CLK_MM_CMDQ 3 +#define CLK_MM_MUTEX 4 +#define CLK_MM_DISP_COLOR 5 +#define CLK_MM_DISP_BLS 6 +#define CLK_MM_DISP_WDMA 7 +#define CLK_MM_DISP_RDMA 8 +#define CLK_MM_DISP_OVL 9 +#define CLK_MM_MDP_TDSHP 10 +#define CLK_MM_MDP_WROT 11 +#define CLK_MM_MDP_WDMA 12 +#define CLK_MM_MDP_RSZ1 13 +#define CLK_MM_MDP_RSZ0 14 +#define CLK_MM_MDP_RDMA 15 +#define CLK_MM_MDP_BLS_26M 16 +#define CLK_MM_CAM_MDP 17 +#define CLK_MM_FAKE_ENG 18 +#define CLK_MM_MUTEX_32K 19 +#define CLK_MM_DISP_RDMA1 20 +#define CLK_MM_DISP_UFOE 21 + +#define CLK_MM_DSI_ENGINE 22 +#define CLK_MM_DSI_DIG 23 +#define CLK_MM_DPI_DIGL 24 +#define CLK_MM_DPI_ENGINE 25 +#define CLK_MM_DPI1_DIGL 26 +#define CLK_MM_DPI1_ENGINE 27 +#define CLK_MM_TVE_OUTPUT 28 +#define CLK_MM_TVE_INPUT 29 +#define CLK_MM_HDMI_PIXEL 30 +#define CLK_MM_HDMI_PLL 31 +#define CLK_MM_HDMI_AUDIO 32 +#define CLK_MM_HDMI_SPDIF 33 +#define CLK_MM_TVE_FMM 34 +#define CLK_MM_NR 35 + +/* IMGSYS */ + +#define CLK_IMG_SMI_COMM 1 +#define CLK_IMG_RESZ 2 +#define CLK_IMG_JPGDEC 3 +#define CLK_IMG_VENC_LT 4 +#define CLK_IMG_VENC 5 +#define CLK_IMG_NR 6 + +/* VDEC */ + +#define CLK_VDEC_CKGEN 1 +#define CLK_VDEC_LARB 2 +#define CLK_VDEC_NR 3 + +/* HIFSYS */ + +#define CLK_HIFSYS_USB0PHY 1 +#define CLK_HIFSYS_USB1PHY 2 +#define CLK_HIFSYS_PCIE0 3 +#define CLK_HIFSYS_PCIE1 4 +#define CLK_HIFSYS_PCIE2 5 +#define CLK_HIFSYS_NR 6 + +/* ETHSYS */ +#define CLK_ETHSYS_HSDMA 1 +#define CLK_ETHSYS_ESW 2 +#define CLK_ETHSYS_GP2 3 +#define CLK_ETHSYS_GP1 4 +#define CLK_ETHSYS_PCM 5 +#define CLK_ETHSYS_GDMA 6 +#define CLK_ETHSYS_I2S 7 +#define CLK_ETHSYS_CRYPTO 8 +#define CLK_ETHSYS_NR 9 + +/* BDP */ + +#define CLK_BDP_BRG_BA 1 +#define CLK_BDP_BRG_DRAM 2 +#define CLK_BDP_LARB_DRAM 3 +#define CLK_BDP_WR_VDI_PXL 4 +#define CLK_BDP_WR_VDI_DRAM 5 +#define CLK_BDP_WR_B 6 +#define CLK_BDP_DGI_IN 7 +#define CLK_BDP_DGI_OUT 8 +#define CLK_BDP_FMT_MAST_27 9 +#define CLK_BDP_FMT_B 10 +#define CLK_BDP_OSD_B 11 +#define CLK_BDP_OSD_DRAM 12 +#define CLK_BDP_OSD_AGENT 13 +#define CLK_BDP_OSD_PXL 14 +#define CLK_BDP_RLE_B 15 +#define CLK_BDP_RLE_AGENT 16 +#define CLK_BDP_RLE_DRAM 17 +#define CLK_BDP_F27M 18 +#define CLK_BDP_F27M_VDOUT 19 +#define CLK_BDP_F27_74_74 20 +#define CLK_BDP_F2FS 21 +#define CLK_BDP_F2FS74_148 22 +#define CLK_BDP_FB 23 +#define CLK_BDP_VDO_DRAM 24 +#define CLK_BDP_VDO_2FS 25 +#define CLK_BDP_VDO_B 26 +#define CLK_BDP_WR_DI_PXL 27 +#define CLK_BDP_WR_DI_DRAM 28 +#define CLK_BDP_WR_DI_B 29 +#define CLK_BDP_NR_PXL 30 +#define CLK_BDP_NR_DRAM 31 +#define CLK_BDP_NR_B 32 + +#define CLK_BDP_RX_F 33 +#define CLK_BDP_RX_X 34 +#define CLK_BDP_RXPDT 35 +#define CLK_BDP_RX_CSCL_N 36 +#define CLK_BDP_RX_CSCL 37 +#define CLK_BDP_RX_DDCSCL_N 38 +#define CLK_BDP_RX_DDCSCL 39 +#define CLK_BDP_RX_VCO 40 +#define CLK_BDP_RX_DP 41 +#define CLK_BDP_RX_P 42 +#define CLK_BDP_RX_M 43 +#define CLK_BDP_RX_PLL 44 +#define CLK_BDP_BRG_RT_B 45 +#define CLK_BDP_BRG_RT_DRAM 46 +#define CLK_BDP_LARBRT_DRAM 47 +#define CLK_BDP_TMDS_SYN 48 +#define CLK_BDP_HDMI_MON 49 +#define CLK_BDP_NR 50 + +#endif /* _DT_BINDINGS_CLK_MT2701_H */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 4/6] clk: mediatek: Add MT2701 clock support [not found] ` <1451975422-31174-1-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> 2016-01-05 6:30 ` [PATCH v2 1/6] clk: mediatek: Refine the makefile to support multiple clock drivers James Liao 2016-01-05 6:30 ` [PATCH v2 3/6] clk: mediatek: Add dt-bindings for MT2701 clocks James Liao @ 2016-01-05 6:30 ` James Liao [not found] ` <1451975422-31174-5-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> 2016-01-05 6:30 ` [PATCH v2 5/6] reset: mediatek: mt2701 reset controller dt-binding file James Liao 3 siblings, 1 reply; 14+ messages in thread From: James Liao @ 2016-01-05 6:30 UTC (permalink / raw) To: Matthias Brugger, Mike Turquette, Stephen Boyd Cc: Sascha Hauer, Daniel Kurtz, Philipp Zabel, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-clk-u79uwXL29TY76Z2rM5mHXA, Shunli Wang, James Liao From: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> Add MT2701 clock support, include topckgen, apmixedsys, infracfg, pericfg and subsystem clocks. Signed-off-by: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- drivers/clk/mediatek/Kconfig | 8 + drivers/clk/mediatek/Makefile | 1 + drivers/clk/mediatek/clk-gate.c | 56 ++ drivers/clk/mediatek/clk-gate.h | 2 + drivers/clk/mediatek/clk-mt2701.c | 1210 +++++++++++++++++++++++++++++++++++++ drivers/clk/mediatek/clk-mtk.c | 25 + drivers/clk/mediatek/clk-mtk.h | 35 +- 7 files changed, 1334 insertions(+), 3 deletions(-) create mode 100644 drivers/clk/mediatek/clk-mt2701.c diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig index dc224e6..6c7cdc0 100644 --- a/drivers/clk/mediatek/Kconfig +++ b/drivers/clk/mediatek/Kconfig @@ -6,6 +6,14 @@ config COMMON_CLK_MEDIATEK ---help--- Mediatek SoCs' clock support. +config COMMON_CLK_MT2701 + bool "Clock driver for Mediatek MT2701 and MT7623" + depends on COMMON_CLK + select COMMON_CLK_MEDIATEK + default ARCH_MEDIATEK + ---help--- + This driver supports Mediatek MT2701 and MT7623 clocks. + config COMMON_CLK_MT8135 bool "Clock driver for Mediatek MT8135" depends on COMMON_CLK diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile index 32e7222..5b2b91b 100644 --- a/drivers/clk/mediatek/Makefile +++ b/drivers/clk/mediatek/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o obj-$(CONFIG_RESET_CONTROLLER) += reset.o +obj-$(CONFIG_COMMON_CLK_MT2701) += clk-mt2701.o obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o obj-$(CONFIG_COMMON_CLK_MT8173) += clk-mt8173.o diff --git a/drivers/clk/mediatek/clk-gate.c b/drivers/clk/mediatek/clk-gate.c index 576bdb7..38badb4 100644 --- a/drivers/clk/mediatek/clk-gate.c +++ b/drivers/clk/mediatek/clk-gate.c @@ -61,6 +61,26 @@ static void mtk_cg_clr_bit(struct clk_hw *hw) regmap_write(cg->regmap, cg->clr_ofs, BIT(cg->bit)); } +static void mtk_cg_set_bit_no_setclr(struct clk_hw *hw) +{ + struct mtk_clk_gate *cg = to_clk_gate(hw); + u32 val; + + regmap_read(cg->regmap, cg->sta_ofs, &val); + val |= BIT(cg->bit); + regmap_write(cg->regmap, cg->sta_ofs, val); +} + +static void mtk_cg_clr_bit_no_setclr(struct clk_hw *hw) +{ + struct mtk_clk_gate *cg = to_clk_gate(hw); + u32 val; + + regmap_read(cg->regmap, cg->sta_ofs, &val); + val &= ~(BIT(cg->bit)); + regmap_write(cg->regmap, cg->sta_ofs, val); +} + static int mtk_cg_enable(struct clk_hw *hw) { mtk_cg_clr_bit(hw); @@ -85,6 +105,30 @@ static void mtk_cg_disable_inv(struct clk_hw *hw) mtk_cg_clr_bit(hw); } +static int mtk_cg_enable_no_setclr(struct clk_hw *hw) +{ + mtk_cg_clr_bit_no_setclr(hw); + + return 0; +} + +static void mtk_cg_disable_no_setclr(struct clk_hw *hw) +{ + mtk_cg_set_bit_no_setclr(hw); +} + +static int mtk_cg_enable_inv_no_setclr(struct clk_hw *hw) +{ + mtk_cg_set_bit_no_setclr(hw); + + return 0; +} + +static void mtk_cg_disable_inv_no_setclr(struct clk_hw *hw) +{ + mtk_cg_clr_bit_no_setclr(hw); +} + const struct clk_ops mtk_clk_gate_ops_setclr = { .is_enabled = mtk_cg_bit_is_cleared, .enable = mtk_cg_enable, @@ -97,6 +141,18 @@ const struct clk_ops mtk_clk_gate_ops_setclr_inv = { .disable = mtk_cg_disable_inv, }; +const struct clk_ops mtk_clk_gate_ops_no_setclr = { + .is_enabled = mtk_cg_bit_is_cleared, + .enable = mtk_cg_enable_no_setclr, + .disable = mtk_cg_disable_no_setclr, +}; + +const struct clk_ops mtk_clk_gate_ops_no_setclr_inv = { + .is_enabled = mtk_cg_bit_is_set, + .enable = mtk_cg_enable_inv_no_setclr, + .disable = mtk_cg_disable_inv_no_setclr, +}; + struct clk * __init mtk_clk_register_gate( const char *name, const char *parent_name, diff --git a/drivers/clk/mediatek/clk-gate.h b/drivers/clk/mediatek/clk-gate.h index 11e25c9..7f7ef34 100644 --- a/drivers/clk/mediatek/clk-gate.h +++ b/drivers/clk/mediatek/clk-gate.h @@ -36,6 +36,8 @@ static inline struct mtk_clk_gate *to_clk_gate(struct clk_hw *hw) extern const struct clk_ops mtk_clk_gate_ops_setclr; extern const struct clk_ops mtk_clk_gate_ops_setclr_inv; +extern const struct clk_ops mtk_clk_gate_ops_no_setclr; +extern const struct clk_ops mtk_clk_gate_ops_no_setclr_inv; struct clk *mtk_clk_register_gate( const char *name, diff --git a/drivers/clk/mediatek/clk-mt2701.c b/drivers/clk/mediatek/clk-mt2701.c new file mode 100644 index 0000000..2f521f4 --- /dev/null +++ b/drivers/clk/mediatek/clk-mt2701.c @@ -0,0 +1,1210 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "clk-mtk.h" +#include "clk-gate.h" + +#include <dt-bindings/clock/mt2701-clk.h> + +static DEFINE_SPINLOCK(lock); + +static const struct mtk_fixed_clk top_fixed_clks[] __initconst = { + FIXED_CLK(CLK_TOP_DPI, "dpi_ck", "clk26m", 108 * MHZ), + FIXED_CLK(CLK_TOP_DMPLL, "dmpll_ck", "clk26m", 400 * MHZ), + FIXED_CLK(CLK_TOP_VENCPLL, "vencpll_ck", "clk26m", 295750000), + FIXED_CLK(CLK_TOP_HDMI_0_PIX340M, "hdmi_0_pix340m", "clk26m", 340 * MHZ), + FIXED_CLK(CLK_TOP_HDMI_0_DEEP340M, "hdmi_0_deep340m", "clk26m", 340 * MHZ), + FIXED_CLK(CLK_TOP_HDMI_0_PLL340M, "hdmi_0_pll340m", "clk26m", 340 * MHZ), + FIXED_CLK(CLK_TOP_HDMITX_CLKDIG_CTS, "hdmitx_dig_cts", "clk26m", 300 * MHZ), + FIXED_CLK(CLK_TOP_HADDS2_FB, "hadds2_fbclk", "clk26m", 27 * MHZ), + FIXED_CLK(CLK_TOP_WBG_DIG_416M, "wbg_dig_ck_416m", "clk26m", 416 * MHZ), +}; + +static const struct mtk_fixed_factor top_fixed_divs[] __initconst = { + FACTOR(CLK_TOP_SYSPLL, "syspll_ck", "mainpll", 1, 1), + FACTOR(CLK_TOP_SYSPLL_D2, "syspll_d2", "mainpll", 1, 2), + FACTOR(CLK_TOP_SYSPLL_D3, "syspll_d3", "mainpll", 1, 3), + FACTOR(CLK_TOP_SYSPLL_D5, "syspll_d5", "mainpll", 1, 5), + FACTOR(CLK_TOP_SYSPLL_D7, "syspll_d7", "mainpll", 1, 7), + FACTOR(CLK_TOP_SYSPLL1_D2, "syspll1_d2", "syspll_d2", 1, 2), + FACTOR(CLK_TOP_SYSPLL1_D4, "syspll1_d4", "syspll_d2", 1, 4), + FACTOR(CLK_TOP_SYSPLL1_D8, "syspll1_d8", "syspll_d2", 1, 8), + FACTOR(CLK_TOP_SYSPLL1_D16, "syspll1_d16", "syspll_d2", 1, 16), + FACTOR(CLK_TOP_SYSPLL2_D2, "syspll2_d2", "syspll_d3", 1, 2), + FACTOR(CLK_TOP_SYSPLL2_D4, "syspll2_d4", "syspll_d3", 1, 4), + FACTOR(CLK_TOP_SYSPLL2_D8, "syspll2_d8", "syspll_d3", 1, 8), + FACTOR(CLK_TOP_SYSPLL3_D2, "syspll3_d2", "syspll_d5", 1, 2), + FACTOR(CLK_TOP_SYSPLL3_D4, "syspll3_d4", "syspll_d5", 1, 4), + FACTOR(CLK_TOP_SYSPLL4_D2, "syspll4_d2", "syspll_d7", 1, 2), + FACTOR(CLK_TOP_SYSPLL4_D4, "syspll4_d4", "syspll_d7", 1, 4), + + FACTOR(CLK_TOP_UNIVPLL, "univpll_ck", "univpll", 1, 1), + FACTOR(CLK_TOP_UNIVPLL_D2, "univpll_d2", "univpll", 1, 2), + FACTOR(CLK_TOP_UNIVPLL_D3, "univpll_d3", "univpll", 1, 3), + FACTOR(CLK_TOP_UNIVPLL_D5, "univpll_d5", "univpll", 1, 5), + FACTOR(CLK_TOP_UNIVPLL_D7, "univpll_d7", "univpll", 1, 7), + FACTOR(CLK_TOP_UNIVPLL_D26, "univpll_d26", "univpll", 1, 26), + FACTOR(CLK_TOP_UNIVPLL_D52, "univpll_d52", "univpll", 1, 52), + FACTOR(CLK_TOP_UNIVPLL_D108, "univpll_d108", "univpll", 1, 108), + FACTOR(CLK_TOP_USB_PHY48M, "USB_PHY48M_CK", "univpll", 1, 26), + FACTOR(CLK_TOP_UNIVPLL1_D2, "univpll1_d2", "univpll_d2", 1, 2), + FACTOR(CLK_TOP_UNIVPLL1_D4, "univpll1_d4", "univpll_d2", 1, 4), + FACTOR(CLK_TOP_UNIVPLL1_D8, "univpll1_d8", "univpll_d2", 1, 8), + FACTOR(CLK_TOP_8BDAC, "8bdac_ck", "univpll_d2", 1, 1), + FACTOR(CLK_TOP_UNIVPLL2_D2, "univpll2_d2", "univpll_d3", 1, 2), + FACTOR(CLK_TOP_UNIVPLL2_D4, "univpll2_d4", "univpll_d3", 1, 4), + FACTOR(CLK_TOP_UNIVPLL2_D8, "univpll2_d8", "univpll_d3", 1, 8), + FACTOR(CLK_TOP_UNIVPLL2_D16, "univpll2_d16", "univpll_d3", 1, 16), + FACTOR(CLK_TOP_UNIVPLL2_D32, "univpll2_d32", "univpll_d3", 1, 32), + FACTOR(CLK_TOP_UNIVPLL3_D2, "univpll3_d2", "univpll_d5", 1, 2), + FACTOR(CLK_TOP_UNIVPLL3_D4, "univpll3_d4", "univpll_d5", 1, 4), + FACTOR(CLK_TOP_UNIVPLL3_D8, "univpll3_d8", "univpll_d5", 1, 8), + + FACTOR(CLK_TOP_MSDCPLL, "msdcpll_ck", "msdcpll", 1, 1), + FACTOR(CLK_TOP_MSDCPLL_D2, "msdcpll_d2", "msdcpll", 1, 2), + FACTOR(CLK_TOP_MSDCPLL_D4, "msdcpll_d4", "msdcpll", 1, 4), + FACTOR(CLK_TOP_MSDCPLL_D8, "msdcpll_d8", "msdcpll", 1, 8), + + FACTOR(CLK_TOP_MMPLL, "mmpll_ck", "mmpll", 1, 1), + FACTOR(CLK_TOP_MMPLL_D2, "mmpll_d2", "mmpll", 1, 2), + + FACTOR(CLK_TOP_DMPLL_D2, "dmpll_d2", "dmpll_ck", 1, 2), + FACTOR(CLK_TOP_DMPLL_D4, "dmpll_d4", "dmpll_ck", 1, 4), + FACTOR(CLK_TOP_DMPLL_X2, "dmpll_x2", "dmpll_ck", 1, 1), + + FACTOR(CLK_TOP_TVDPLL, "tvdpll_ck", "tvdpll", 1, 1), + FACTOR(CLK_TOP_TVDPLL_D2, "tvdpll_d2", "tvdpll", 1, 2), + FACTOR(CLK_TOP_TVDPLL_D4, "tvdpll_d4", "tvdpll", 1, 4), + + FACTOR(CLK_TOP_VDECPLL, "vdecpll_ck", "vdecpll", 1, 1), + FACTOR(CLK_TOP_TVD2PLL, "tvd2pll_ck", "tvd2pll", 1, 1), + FACTOR(CLK_TOP_TVD2PLL_D2, "tvd2pll_d2", "tvd2pll", 1, 2), + + FACTOR(CLK_TOP_MIPIPLL, "mipipll", "dpi_ck", 1, 1), + FACTOR(CLK_TOP_MIPIPLL_D2, "mipipll_d2", "dpi_ck", 1, 2), + FACTOR(CLK_TOP_MIPIPLL_D4, "mipipll_d4", "dpi_ck", 1, 4), + + FACTOR(CLK_TOP_HDMIPLL, "hdmipll_ck", "hdmitx_dig_cts", 1, 1), + FACTOR(CLK_TOP_HDMIPLL_D2, "hdmipll_d2", "hdmitx_dig_cts", 1, 2), + FACTOR(CLK_TOP_HDMIPLL_D3, "hdmipll_d3", "hdmitx_dig_cts", 1, 3), + + FACTOR(CLK_TOP_ARMPLL_1P3G, "armpll_1p3g_ck", "armpll", 1, 1), + + FACTOR(CLK_TOP_AUDPLL, "audpll", "audpll_sel", 1, 1), + FACTOR(CLK_TOP_AUDPLL_D4, "audpll_d4", "audpll_sel", 1, 4), + FACTOR(CLK_TOP_AUDPLL_D8, "audpll_d8", "audpll_sel", 1, 8), + FACTOR(CLK_TOP_AUDPLL_D16, "audpll_d16", "audpll_sel", 1, 16), + FACTOR(CLK_TOP_AUDPLL_D24, "audpll_d24", "audpll_sel", 1, 24), + + FACTOR(CLK_TOP_AUD1PLL_98M, "aud1pll_98m_ck", "aud1pll", 1, 3), + FACTOR(CLK_TOP_AUD2PLL_90M, "aud2pll_90m_ck", "aud2pll", 1, 3), + FACTOR(CLK_TOP_HADDS2PLL_98M, "hadds2pll_98m", "hadds2pll", 1, 3), + FACTOR(CLK_TOP_HADDS2PLL_294M, "hadds2pll_294m", "hadds2pll", 1, 1), + FACTOR(CLK_TOP_ETHPLL_500M, "ethpll_500m_ck", "ethpll", 1, 1), + FACTOR(CLK_TOP_CLK26M_D8, "clk26m_d8", "clk26m", 1, 8), + FACTOR(CLK_TOP_32K_INTERNAL, "32k_internal", "clk26m", 1, 793), + FACTOR(CLK_TOP_32K_EXTERNAL, "32k_external", "rtc32k", 1, 1), +}; + +static const char * const axi_parents[] __initconst = { + "clk26m", + "syspll1_d2", + "syspll_d5", + "syspll1_d4", + "univpll_d5", + "univpll2_d2", + "mmpll_d2", + "dmpll_d2" +}; + +static const char * const mem_parents[] __initconst = { + "clk26m", + "dmpll_ck" +}; + +static const char * const ddrphycfg_parents[] __initconst = { + "clk26m", + "syspll1_d8" +}; + +static const char * const mm_parents[] __initconst = { + "clk26m", + "vencpll_ck", + "syspll1_d2", + "syspll1_d4", + "univpll_d5", + "univpll1_d2", + "univpll2_d2", + "dmpll_ck" +}; + +static const char * const pwm_parents[] __initconst = { + "clk26m", + "univpll2_d4", + "univpll3_d2", + "univpll1_d4", +}; + +static const char * const vdec_parents[] __initconst = { + "clk26m", + "vdecpll_ck", + "syspll_d5", + "syspll1_d4", + "univpll_d5", + "univpll2_d2", + "vencpll_ck", + "msdcpll_d2", + "mmpll_d2" +}; + +static const char * const mfg_parents[] __initconst = { + "clk26m", + "mmpll_ck", + "dmpll_x2_ck", + "msdcpll_ck", + "clk26m", + "syspll_d3", + "univpll_d3", + "univpll1_d2" +}; + +static const char * const camtg_parents[] __initconst = { + "clk26m", + "univpll_d26", + "univpll2_d2", + "syspll3_d2", + "syspll3_d4", + "msdcpll_d2", + "mmpll_d2" +}; + +static const char * const uart_parents[] __initconst = { + "clk26m", + "univpll2_d8" +}; + +static const char * const spi_parents[] __initconst = { + "clk26m", + "syspll3_d2", + "syspll4_d2", + "univpll2_d4", + "univpll1_d8" +}; + +static const char * const usb20_parents[] __initconst = { + "clk26m", + "univpll1_d8", + "univpll3_d4" +}; + +static const char * const msdc30_parents[] __initconst = { + "clk26m", + "msdcpll_d2", + "syspll2_d2", + "syspll1_d4", + "univpll1_d4", + "univpll2_d4" +}; + +static const char * const audio_parents[] __initconst = { + "clk26m", + "syspll1_d16" +}; + +static const char * const aud_intbus_parents[] __initconst = { + "clk26m", + "syspll1_d4", + "syspll3_d2", + "syspll4_d2", + "univpll3_d2", + "univpll2_d4" +}; + +static const char * const pmicspi_parents[] __initconst = { + "clk26m", + "syspll1_d8", + "syspll2_d4", + "syspll4_d2", + "syspll3_d4", + "syspll2_d8", + "syspll1_d16", + "univpll3_d4", + "univpll_d26", + "dmpll_d2", + "dmpll_d4" +}; + +static const char * const scp_parents[] __initconst = { + "clk26m", + "syspll1_d8", + "dmpll_d2", + "dmpll_d4" +}; + +static const char * const dpi0_parents[] __initconst = { + "clk26m", + "mipipll", + "mipipll_d2", + "mipipll_d4", + "clk26m", + "tvdpll_ck", + "tvdpll_d2", + "tvdpll_d4" +}; + +static const char * const dpi1_parents[] __initconst = { + "clk26m", + "tvdpll_ck", + "tvdpll_d2", + "tvdpll_d4" +}; + +static const char * const tve_parents[] __initconst = { + "clk26m", + "mipipll", + "mipipll_d2", + "mipipll_d4", + "clk26m", + "tvdpll_ck", + "tvdpll_d2", + "tvdpll_d4" +}; + +static const char * const hdmi_parents[] __initconst = { + "clk26m", + "hdmipll_ck", + "hdmipll_d2", + "hdmipll_d3" +}; + +static const char * const apll_parents[] __initconst = { + "clk26m", + "audpll", + "audpll_d4", + "audpll_d8", + "audpll_d16", + "audpll_d24", + "clk26m", + "clk26m" +}; + +static const char * const rtc_parents[] __initconst = { + "32k_internal", + "32k_external", + "clk26m", + "univpll3_d8" +}; + +static const char * const nfi2x_parents[] __initconst = { + "clk26m", + "syspll2_d2", + "syspll_d7", + "univpll3_d2", + "syspll2_d4", + "univpll3_d4", + "syspll4_d4", + "clk26m" +}; + +static const char * const emmc_hclk_parents[] __initconst = { + "clk26m", + "syspll1_d2", + "syspll1_d4", + "syspll2_d2" +}; + +static const char * const flash_parents[] __initconst = { + "clk26m_d8", + "clk26m", + "syspll2_d8", + "syspll3_d4", + "univpll3_d4", + "syspll4_d2", + "syspll2_d4", + "univpll2_d4" +}; + +static const char * const di_parents[] __initconst = { + "clk26m", + "tvd2pll_ck", + "tvd2pll_d2", + "clk26m" +}; + +static const char * const nr_osd_parents[] __initconst = { + "clk26m", + "vencpll_ck", + "syspll1_d2", + "syspll1_d4", + "univpll_d5", + "univpll1_d2", + "univpll2_d2", + "dmpll_ck" +}; + +static const char * const hdmirx_bist_parents[] __initconst = { + "clk26m", + "syspll_d3", + "clk26m", + "syspll1_d16", + "syspll4_d2", + "syspll1_d4", + "vencpll_ck", + "clk26m" +}; + +static const char * const intdir_parents[] __initconst = { + "clk26m", + "mmpll_ck", + "syspll_d2", + "univpll_d2" +}; + +static const char * const asm_parents[] __initconst = { + "clk26m", + "univpll2_d4", + "univpll2_d2", + "syspll_d5" +}; + +static const char * const ms_card_parents[] __initconst = { + "clk26m", + "univpll3_d8", + "syspll4_d4" +}; + +static const char * const ethif_parents[] __initconst = { + "clk26m", + "syspll1_d2", + "syspll_d5", + "syspll1_d4", + "univpll_d5", + "univpll1_d2", + "dmpll_ck", + "dmpll_d2" +}; + +static const char * const hdmirx_parents[] __initconst = { + "clk26m", + "univpll_d52" +}; + +static const char * const cmsys_parents[] __initconst = { + "clk26m", + "syspll1_d2", + "univpll1_d2", + "univpll_d5", + "syspll_d5", + "syspll2_d2", + "syspll1_d4", + "syspll3_d2", + "syspll2_d4", + "syspll1_d8", + "clk26m", + "clk26m", + "clk26m", + "clk26m", + "clk26m" +}; + +static const char * const clk_8bdac_parents[] __initconst = { + "clkrtc_int", + "8bdac_ck_pre", + "clk26m", + "clk26m" +}; + +static const char * const aud2dvd_parents[] __initconst = { + "a1sys_hp_ck", + "a2sys_hp_ck" +}; + +static const char * const padmclk_parents[] __initconst = { + "clk26m", + "univpll_d26", + "univpll_d52", + "univpll_d108", + "univpll2_d8", + "univpll2_d16", + "univpll2_d32" +}; + +static const char * const aud_mux_parents[] __initconst = { + "clk26m", + "aud1pll_98m_ck", + "aud2pll_90m_ck", + "hadds2pll_98m", + "audio_ext1_ck", + "audio_ext2_ck" +}; + +static const char * const aud_src_parents[] __initconst = { + "aud_mux1_sel", + "aud_mux2_sel" +}; + +static const char * const cpu_parents[] __initconst = { + "clk26m", + "armpll", + "mainpll", + "mmpll" +}; + +static const struct mtk_composite top_muxes[] __initconst = { + MUX_GATE(CLK_TOP_AXI_SEL, "axi_sel", axi_parents, + 0x0040, 0, 3, INVALID_MUX_GATE_BIT), + MUX_GATE(CLK_TOP_MEM_SEL, "mem_sel", mem_parents, 0x0040, 8, 1, 15), + MUX_GATE(CLK_TOP_DDRPHYCFG_SEL, "ddrphycfg_sel", ddrphycfg_parents, 0x0040, 16, 1, 23), + MUX_GATE(CLK_TOP_MM_SEL, "mm_sel", mm_parents, 0x0040, 24, 3, 31), + + MUX_GATE(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x0050, 0, 2, 7), + MUX_GATE(CLK_TOP_VDEC_SEL, "vdec_sel", vdec_parents, 0x0050, 8, 4, 15), + MUX_GATE(CLK_TOP_MFG_SEL, "mfg_sel", mfg_parents, 0x0050, 16, 3, 23), + MUX_GATE(CLK_TOP_CAMTG_SEL, "camtg_sel", camtg_parents, 0x0050, 24, 3, 31), + MUX_GATE(CLK_TOP_UART_SEL, "uart_sel", uart_parents, 0x0060, 0, 1, 7), + + MUX_GATE(CLK_TOP_SPI0_SEL, "spi0_sel", spi_parents, 0x0060, 8, 3, 15), + MUX_GATE(CLK_TOP_USB20_SEL, "usb20_sel", usb20_parents, 0x0060, 16, 2, 23), + MUX_GATE(CLK_TOP_MSDC30_0_SEL, "msdc30_0_sel", msdc30_parents, 0x0060, 24, 3, 31), + + MUX_GATE(CLK_TOP_MSDC30_1_SEL, "msdc30_1_sel", msdc30_parents, 0x0070, 0, 3, 7), + MUX_GATE(CLK_TOP_MSDC30_2_SEL, "msdc30_2_sel", msdc30_parents, 0x0070, 8, 3, 15), + MUX_GATE(CLK_TOP_AUDIO_SEL, "audio_sel", msdc30_parents, 0x0070, 16, 1, 23), + MUX_GATE(CLK_TOP_AUDINTBUS_SEL, "aud_intbus_sel", aud_intbus_parents, 0x0070, 24, 3, 31), + + MUX_GATE(CLK_TOP_PMICSPI_SEL, "pmicspi_sel", pmicspi_parents, 0x0080, 0, 4, 7), + MUX_GATE(CLK_TOP_SCP_SEL, "scp_sel", scp_parents, 0x0080, 8, 2, 15), + MUX_GATE(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x0080, 16, 3, 23), + MUX_GATE(CLK_TOP_DPI1_SEL, "dpi1_sel", dpi1_parents, 0x0080, 24, 2, 31), + + MUX_GATE(CLK_TOP_TVE_SEL, "tve_sel", tve_parents, 0x0090, 0, 3, 7), + MUX_GATE(CLK_TOP_HDMI_SEL, "hdmi_sel", hdmi_parents, 0x0090, 8, 2, 15), + MUX_GATE(CLK_TOP_APLL_SEL, "apll_sel", apll_parents, 0x0090, 16, 3, 23), + + MUX_GATE(CLK_TOP_RTC_SEL, "rtc_sel", rtc_parents, 0x00A0, 0, 2, 7), + MUX_GATE(CLK_TOP_NFI2X_SEL, "nfi2x_sel", nfi2x_parents, 0x00A0, 8, 3, 15), + MUX_GATE(CLK_TOP_EMMC_HCLK_SEL, "emmc_hclk_sel", emmc_hclk_parents, 0x00A0, 24, 2, 31), + + MUX_GATE(CLK_TOP_FLASH_SEL, "flash_sel", flash_parents, 0x00B0, 0, 3, 7), + MUX_GATE(CLK_TOP_DI_SEL, "di_sel", di_parents, 0x00B0, 8, 2, 15), + MUX_GATE(CLK_TOP_NR_SEL, "nr_sel", nr_osd_parents, 0x00B0, 16, 3, 23), + MUX_GATE(CLK_TOP_OSD_SEL, "osd_sel", nr_osd_parents, 0x00B0, 24, 3, 31), + + MUX_GATE(CLK_TOP_HDMIRX_BIST_SEL, "hdmirx_bist_sel", hdmirx_bist_parents, 0x00C0, 0, 3, 7), + MUX_GATE(CLK_TOP_INTDIR_SEL, "intdir_sel", intdir_parents, 0x00C0, 8, 2, 15), + MUX_GATE(CLK_TOP_ASM_I_SEL, "asm_i_sel", asm_parents, 0x00C0, 16, 2, 23), + MUX_GATE(CLK_TOP_ASM_M_SEL, "asm_m_sel", asm_parents, 0x00C0, 24, 3, 31), + + MUX_GATE(CLK_TOP_ASM_H_SEL, "asm_h_sel", asm_parents, 0x00D0, 0, 2, 7), + MUX_GATE(CLK_TOP_MS_CARD_SEL, "ms_card_sel", ms_card_parents, 0x00D0, 16, 2, 23), + MUX_GATE(CLK_TOP_ETHIF_SEL, "ethif_sel", ethif_parents, 0x00D0, 24, 3, 31), + + MUX_GATE(CLK_TOP_HDMIRX26_24_SEL, "hdmirx26_24_sel", hdmirx_parents, 0x00E0, 0, 1, 7), + MUX_GATE(CLK_TOP_MSDC30_3_SEL, "msdc30_3_sel", msdc30_parents, 0x00E0, 8, 3, 15), + MUX_GATE(CLK_TOP_CMSYS_SEL, "cmsys_sel", cmsys_parents, 0x00E0, 16, 4, 23), + + MUX_GATE(CLK_TOP_SPI1_SEL, "spi2_sel", spi_parents, 0x00E0, 24, 3, 31), + MUX_GATE(CLK_TOP_SPI2_SEL, "spi1_sel", spi_parents, 0x00F0, 0, 3, 7), + MUX_GATE(CLK_TOP_8BDAC_SEL, "8bdac_sel", clk_8bdac_parents, 0x00F0, 8, 2, 15), + MUX_GATE(CLK_TOP_AUD2DVD_SEL, "aud2dvd_sel", aud2dvd_parents, 0x00F0, 16, 1, 23), + + MUX(CLK_TOP_PADMCLK_SEL, "padmclk_sel", padmclk_parents, 0x0100, 0, 3), + + MUX(CLK_TOP_AUD_MUX1_SEL, "aud_mux1_sel", aud_mux_parents, 0x012c, 0, 3), + MUX(CLK_TOP_AUD_MUX2_SEL, "aud_mux2_sel", aud_mux_parents, 0x012c, 3, 3), + MUX(CLK_TOP_AUDPLL_MUX_SEL, "audpll_sel", aud_mux_parents, 0x012c, 6, 3), + MUX_GATE(CLK_TOP_AUD_K1_SRC_SEL, "aud_k1_src_sel", aud_src_parents, 0x012c, 15, 1, 23), + MUX_GATE(CLK_TOP_AUD_K2_SRC_SEL, "aud_k2_src_sel", aud_src_parents, 0x012c, 16, 1, 24), + MUX_GATE(CLK_TOP_AUD_K3_SRC_SEL, "aud_k3_src_sel", aud_src_parents, 0x012c, 17, 1, 25), + MUX_GATE(CLK_TOP_AUD_K4_SRC_SEL, "aud_k4_src_sel", aud_src_parents, 0x012c, 18, 1, 26), + MUX_GATE(CLK_TOP_AUD_K5_SRC_SEL, "aud_k5_src_sel", aud_src_parents, 0x012c, 19, 1, 27), + MUX_GATE(CLK_TOP_AUD_K6_SRC_SEL, "aud_k6_src_sel", aud_src_parents, 0x012c, 20, 1, 28), +}; + +static const struct mtk_clk_divider top_adj_divs[] __initconst = { + DIV_ADJ(CLK_TOP_AUD_EXTCK1_DIV, "audio_ext1_ck", "aud_ext_ck1", 0x0120, 0, 8), + DIV_ADJ(CLK_TOP_AUD_EXTCK2_DIV, "audio_ext2_ck", "aud_ext_ck2", 0x0120, 8, 8), + DIV_ADJ(CLK_TOP_AUD_MUX1_DIV, "aud_mux1_div", "aud_mux1_sel", 0x0120, 16, 8), + DIV_ADJ(CLK_TOP_AUD_MUX2_DIV, "aud_mux2_div", "aud_mux2_sel", 0x0120, 24, 8), + DIV_ADJ(CLK_TOP_AUD_K1_SRC_DIV, "aud_k1_src_div", "aud_k1_src_sel", 0x0124, 0, 8), + DIV_ADJ(CLK_TOP_AUD_K2_SRC_DIV, "aud_k2_src_div", "aud_k2_src_sel", 0x0124, 8, 8), + DIV_ADJ(CLK_TOP_AUD_K3_SRC_DIV, "aud_k3_src_div", "aud_k3_src_sel", 0x0124, 16, 8), + DIV_ADJ(CLK_TOP_AUD_K4_SRC_DIV, "aud_k4_src_div", "aud_k4_src_sel", 0x0124, 24, 8), + DIV_ADJ(CLK_TOP_AUD_K5_SRC_DIV, "aud_k5_src_div", "aud_k5_src_sel", 0x0128, 0, 8), + DIV_ADJ(CLK_TOP_AUD_K6_SRC_DIV, "aud_k6_src_div", "aud_k6_src_sel", 0x0128, 8, 8), +}; + +static const struct mtk_gate_regs top_aud_cg_regs __initconst = { + .sta_ofs = 0x012C, +}; + +#define GATE_TOP_AUD(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &top_aud_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_no_setclr, \ + } + +static const struct mtk_gate top_clks[] __initconst = { + GATE_TOP_AUD(CLK_TOP_AUD_48K_TIMING, "a1sys_hp_ck", "aud_mux1_div", 21), + GATE_TOP_AUD(CLK_TOP_AUD_44K_TIMING, "a2sys_hp_ck", "aud_mux2_div", 22), + GATE_TOP_AUD(CLK_TOP_AUD_I2S1_MCLK, "aud_i2s1_mclk", "aud_k1_src_div", 23), + GATE_TOP_AUD(CLK_TOP_AUD_I2S2_MCLK, "aud_i2s2_mclk", "aud_k2_src_div", 24), + GATE_TOP_AUD(CLK_TOP_AUD_I2S3_MCLK, "aud_i2s3_mclk", "aud_k3_src_div", 25), + GATE_TOP_AUD(CLK_TOP_AUD_I2S4_MCLK, "aud_i2s4_mclk", "aud_k4_src_div", 26), + GATE_TOP_AUD(CLK_TOP_AUD_I2S5_MCLK, "aud_i2s5_mclk", "aud_k5_src_div", 27), + GATE_TOP_AUD(CLK_TOP_AUD_I2S6_MCLK, "aud_i2s6_mclk", "aud_k6_src_div", 28), +}; + +static void __init mtk_topckgen_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + void __iomem *base; + int r; + + base = of_iomap(node, 0); + if (!base) { + pr_err("%s(): ioremap failed\n", __func__); + return; + } + + clk_data = mtk_alloc_clk_data(CLK_TOP_NR); + + mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks), + clk_data); + + mtk_clk_register_factors(top_fixed_divs, ARRAY_SIZE(top_fixed_divs), + clk_data); + + mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), + base, &lock, clk_data); + + mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs), + base, &lock, clk_data); + + mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks), + clk_data); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); +} +CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt2701-topckgen", mtk_topckgen_init); + +static const struct mtk_gate_regs infra_cg_regs __initconst = { + .set_ofs = 0x0040, + .clr_ofs = 0x0044, + .sta_ofs = 0x0048, +}; + +#define GATE_ICG(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &infra_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr, \ + } + +static const struct mtk_gate infra_clks[] __initconst = { + GATE_ICG(CLK_INFRA_DBG, "dbgclk", "axi_sel", 0), + GATE_ICG(CLK_INFRA_SMI, "smi_ck", "mm_sel", 1), + GATE_ICG(CLK_INFRA_QAXI_CM4, "cm4_ck", "axi_sel", 2), + GATE_ICG(CLK_INFRA_AUD_SPLIN_B, "audio_splin_bck", "hadds2_294m_ck", 4), + GATE_ICG(CLK_INFRA_AUDIO, "audio_ck", "clk_null", 5), + GATE_ICG(CLK_INFRA_EFUSE, "efuse_ck", "clk26m", 6), + GATE_ICG(CLK_INFRA_L2C_SRAM, "l2c_sram_ck", "mm_sel", 7), + GATE_ICG(CLK_INFRA_M4U, "m4u_ck", "mem_sel", 8), + GATE_ICG(CLK_INFRA_CONNMCU, "connsys_bus", "wbg_dig_ck_416m", 12), + GATE_ICG(CLK_INFRA_TRNG, "trng_ck", "axi_sel", 13), + GATE_ICG(CLK_INFRA_RAMBUFIF, "rambufif_ck", "mem_sel", 14), + GATE_ICG(CLK_INFRA_CPUM, "cpum_ck", "mem_sel", 15), + GATE_ICG(CLK_INFRA_KP, "kp_ck", "axi_sel", 16), + GATE_ICG(CLK_INFRA_CEC, "cec_ck", "rtc_sel", 18), + GATE_ICG(CLK_INFRA_IRRX, "irrx_ck", "axi_sel", 19), + GATE_ICG(CLK_INFRA_PMICSPI, "pmicspi_ck", "pmicspi_sel", 22), + GATE_ICG(CLK_INFRA_PMICWRAP, "pmicwrap_ck", "axi_sel", 23), + GATE_ICG(CLK_INFRA_DDCCI, "ddcci_ck", "axi_sel", 24), +}; + +static const struct mtk_fixed_factor infra_fixed_divs[] __initconst = { + FACTOR(CLK_INFRA_CLK_13M, "clk13m", "clk26m", 1, 2), +}; + +static void __init mtk_infrasys_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + int r; + + clk_data = mtk_alloc_clk_data(CLK_INFRA_NR); + + mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks), + clk_data); + mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs), + clk_data); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); +} +CLK_OF_DECLARE(mtk_infrasys, "mediatek,mt2701-infracfg", mtk_infrasys_init); + +static const struct mtk_gate_regs peri0_cg_regs __initconst = { + .set_ofs = 0x0008, + .clr_ofs = 0x0010, + .sta_ofs = 0x0018, +}; + +static const struct mtk_gate_regs peri1_cg_regs __initconst = { + .set_ofs = 0x000c, + .clr_ofs = 0x0014, + .sta_ofs = 0x001c, +}; + +#define GATE_PERI0(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &peri0_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr, \ + } + +#define GATE_PERI1(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &peri1_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr, \ + } + +static const struct mtk_gate peri_clks[] __initconst = { + GATE_PERI1(CLK_PERI_USB0_MCU, "usb0_mcu_ck", "axi_sel", 31), + GATE_PERI1(CLK_PERI_ETH, "eth_ck", "clk26m", 30), + GATE_PERI1(CLK_PERI_SPI0, "spi0_ck", "spi0_sel", 29), + GATE_PERI1(CLK_PERI_AUXADC, "auxadc_ck", "clk26m", 28), + GATE_PERI0(CLK_PERI_I2C3, "i2c3_ck", "clk26m", 27), + GATE_PERI0(CLK_PERI_I2C2, "i2c2_ck", "axi_sel", 26), + GATE_PERI0(CLK_PERI_I2C1, "i2c1_ck", "axi_sel", 25), + GATE_PERI0(CLK_PERI_I2C0, "i2c0_ck", "axi_sel", 24), + GATE_PERI0(CLK_PERI_BTIF, "bitif_ck", "axi_sel", 23), + GATE_PERI0(CLK_PERI_UART3, "uart3_ck", "axi_sel", 22), + GATE_PERI0(CLK_PERI_UART2, "uart2_ck", "axi_sel", 21), + GATE_PERI0(CLK_PERI_UART1, "uart1_ck", "axi_sel", 20), + GATE_PERI0(CLK_PERI_UART0, "uart0_ck", "axi_sel", 19), + GATE_PERI0(CLK_PERI_NLI, "nli_ck", "axi_sel", 18), + GATE_PERI0(CLK_PERI_MSDC50_3, "msdc50_3_ck", "emmc_hclk_sel", 17), + GATE_PERI0(CLK_PERI_MSDC30_3, "msdc30_3_ck", "msdc30_3_sel", 16), + GATE_PERI0(CLK_PERI_MSDC30_2, "msdc30_2_ck", "msdc30_2_sel", 15), + GATE_PERI0(CLK_PERI_MSDC30_1, "msdc30_1_ck", "msdc30_1_sel", 14), + GATE_PERI0(CLK_PERI_MSDC30_0, "msdc30_0_ck", "msdc30_0_sel", 13), + GATE_PERI0(CLK_PERI_AP_DMA, "ap_dma_ck", "axi_sel", 12), + GATE_PERI0(CLK_PERI_USB1, "usb1_ck", "usb20_sel", 11), + GATE_PERI0(CLK_PERI_USB0, "usb0_ck", "usb20_sel", 10), + GATE_PERI0(CLK_PERI_PWM, "pwm_ck", "axi_sel", 9), + GATE_PERI0(CLK_PERI_PWM7, "pwm7_ck", "axi_sel", 8), + GATE_PERI0(CLK_PERI_PWM6, "pwm6_ck", "axi_sel", 7), + GATE_PERI0(CLK_PERI_PWM5, "pwm5_ck", "axi_sel", 6), + GATE_PERI0(CLK_PERI_PWM4, "pwm4_ck", "axi_sel", 5), + GATE_PERI0(CLK_PERI_PWM3, "pwm3_ck", "axi_sel", 4), + GATE_PERI0(CLK_PERI_PWM2, "pwm2_ck", "axi_sel", 3), + GATE_PERI0(CLK_PERI_PWM1, "pwm1_ck", "axi_sel", 2), + GATE_PERI0(CLK_PERI_THERM, "therm_ck", "axi_sel", 1), + GATE_PERI0(CLK_PERI_NFI, "nfi_ck", "nfi2x_sel", 0), + + GATE_PERI1(CLK_PERI_FCI, "fci_ck", "ms_card", 11), + GATE_PERI1(CLK_PERI_SPI2, "spi2_ck", "spi2_sel", 10), + GATE_PERI1(CLK_PERI_SPI1, "spi1_ck", "spi1_sel", 9), + GATE_PERI1(CLK_PERI_HOST89_DVD, "host89_dvd_ck", "aud2dvd_sel", 8), + GATE_PERI1(CLK_PERI_HOST89_SPI, "host89_spi_ck", "spi0_sel", 7), + GATE_PERI1(CLK_PERI_HOST89_INT, "host89_int_ck", "axi_sel", 6), + GATE_PERI1(CLK_PERI_FLASH, "flash_ck", "nfi2x_sel", 5), + GATE_PERI1(CLK_PERI_NFI_PAD, "nfi_pad_ck", "nfi_sel", 4), + GATE_PERI1(CLK_PERI_NFI_ECC, "nfi_ecc_ck", "nfi_sel", 3), + GATE_PERI1(CLK_PERI_GCPU, "gcpu_ck", "axi_sel", 2), + GATE_PERI1(CLK_PERI_USB_SLV, "usbslv_ck", "axi_sel", 1), + GATE_PERI1(CLK_PERI_USB1_MCU, "usb1_mcu_ck", "axi_sel", 0), +}; + +static const char * const uart_ck_sel_parents[] __initconst = { + "clk26m", + "uart_sel", +}; + +static const struct mtk_composite peri_muxs[] __initconst = { + MUX(CLK_PERI_UART0_SEL, "uart0_ck_sel", uart_ck_sel_parents, 0x40c, 0, 1), + MUX(CLK_PERI_UART1_SEL, "uart1_ck_sel", uart_ck_sel_parents, 0x40c, 1, 1), + MUX(CLK_PERI_UART2_SEL, "uart2_ck_sel", uart_ck_sel_parents, 0x40c, 2, 1), + MUX(CLK_PERI_UART3_SEL, "uart3_ck_sel", uart_ck_sel_parents, 0x40c, 3, 1), +}; + +static void __init mtk_pericfg_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + void __iomem *base; + int r; + + base = of_iomap(node, 0); + if (!base) { + pr_err("%s(): ioremap failed\n", __func__); + return; + } + + clk_data = mtk_alloc_clk_data(CLK_PERI_NR); + + mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks), + clk_data); + + mtk_clk_register_composites(peri_muxs, ARRAY_SIZE(peri_muxs), base, + &lock, clk_data); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); +} +CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt2701-pericfg", mtk_pericfg_init); + +static const struct mtk_gate_regs disp0_cg_regs __initconst = { + .set_ofs = 0x0104, + .clr_ofs = 0x0108, + .sta_ofs = 0x0100, +}; + +static const struct mtk_gate_regs disp1_cg_regs __initconst = { + .set_ofs = 0x0114, + .clr_ofs = 0x0118, + .sta_ofs = 0x0110, +}; + +#define GATE_DISP0(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &disp0_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr, \ + } + +#define GATE_DISP1(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &disp1_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr, \ + } + +static const struct mtk_gate mm_clks[] __initconst = { + GATE_DISP0(CLK_MM_SMI_COMMON, "mm_smi_comm", "mm_sel", 0), + GATE_DISP0(CLK_MM_SMI_LARB0, "mm_smi_larb0", "mm_sel", 1), + GATE_DISP0(CLK_MM_CMDQ, "mm_cmdq", "mm_sel", 2), + GATE_DISP0(CLK_MM_MUTEX, "mm_mutex", "mm_sel", 3), + GATE_DISP0(CLK_MM_DISP_COLOR, "mm_disp_color", "mm_sel", 4), + GATE_DISP0(CLK_MM_DISP_BLS, "mm_disp_bls", "mm_sel", 5), + GATE_DISP0(CLK_MM_DISP_WDMA, "mm_disp_wdma", "mm_sel", 6), + GATE_DISP0(CLK_MM_DISP_RDMA, "mm_disp_rdma", "mm_sel", 7), + GATE_DISP0(CLK_MM_DISP_OVL, "mm_disp_ovl", "mm_sel", 8), + GATE_DISP0(CLK_MM_MDP_TDSHP, "mm_mdp_tdshp", "mm_sel", 9), + GATE_DISP0(CLK_MM_MDP_WROT, "mm_mdp_wrot", "mm_sel", 10), + GATE_DISP0(CLK_MM_MDP_WDMA, "mm_mdp_wdma", "mm_sel", 11), + GATE_DISP0(CLK_MM_MDP_RSZ1, "mm_mdp_rsz1", "mm_sel", 12), + GATE_DISP0(CLK_MM_MDP_RSZ0, "mm_mdp_rsz0", "mm_sel", 13), + GATE_DISP0(CLK_MM_MDP_RDMA, "mm_mdp_rdma", "mm_sel", 14), + GATE_DISP0(CLK_MM_MDP_BLS_26M, "mm_mdp_bls_26m", "clk26m", 15), + GATE_DISP0(CLK_MM_CAM_MDP, "mm_cam_mdp", "mm_sel", 16), + GATE_DISP0(CLK_MM_FAKE_ENG, "mm_fake_eng", "mm_sel", 17), + GATE_DISP0(CLK_MM_MUTEX_32K, "mm_mutex_32k", "rtc_sel", 18), + GATE_DISP0(CLK_MM_DISP_RDMA1, "mm_disp_rdma1", "mm_sel", 19), + GATE_DISP0(CLK_MM_DISP_UFOE, "mm_disp_ufoe", "mm_sel", 20), + GATE_DISP1(CLK_MM_DSI_ENGINE, "mm_dsi_eng", "mm_sel", 0), + GATE_DISP1(CLK_MM_DSI_DIG, "mm_dsi_dig", "dsio_lntc_dsiclk", 1), + GATE_DISP1(CLK_MM_DPI_DIGL, "mm_dpi_digl", "dpi0_sel", 2), + GATE_DISP1(CLK_MM_DPI_ENGINE, "mm_dpi_eng", "mm_sel", 3), + GATE_DISP1(CLK_MM_DPI1_DIGL, "mm_dpi1_digl", "dpi1_sel", 4), + GATE_DISP1(CLK_MM_DPI1_ENGINE, "mm_dpi1_eng", "mm_sel", 5), + GATE_DISP1(CLK_MM_TVE_OUTPUT, "mm_tve_output", "tve_sel", 6), + GATE_DISP1(CLK_MM_TVE_INPUT, "mm_tve_input", "dpi0_sel", 7), + GATE_DISP1(CLK_MM_HDMI_PIXEL, "mm_hdmi_pixel", "dpi1_sel", 8), + GATE_DISP1(CLK_MM_HDMI_PLL, "mm_hdmi_pll", "hdmi_sel", 9), + GATE_DISP1(CLK_MM_HDMI_AUDIO, "mm_hdmi_audio", "apll_sel", 10), + GATE_DISP1(CLK_MM_HDMI_SPDIF, "mm_hdmi_spdif", "apll_sel", 11), + GATE_DISP1(CLK_MM_TVE_FMM, "mm_tve_fmm", "mm_sel", 14), +}; + +static void __init mtk_mmsys_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + int r; + + clk_data = mtk_alloc_clk_data(CLK_MM_NR); + + mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks), + clk_data); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); +} +CLK_OF_DECLARE(mtk_mmsys, "mediatek,mt2701-mmsys", mtk_mmsys_init); + +static const struct mtk_gate_regs img_cg_regs __initconst = { + .set_ofs = 0x0004, + .clr_ofs = 0x0008, + .sta_ofs = 0x0000, +}; + +#define GATE_IMG(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &img_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr, \ + } + +static const struct mtk_gate img_clks[] __initconst = { + GATE_IMG(CLK_IMG_SMI_COMM, "img_smi_comm", "mm_sel", 0), + GATE_IMG(CLK_IMG_RESZ, "img_resz", "mm_sel", 1), + GATE_IMG(CLK_IMG_JPGDEC, "img_jpgdec", "mm_sel", 5), + GATE_IMG(CLK_IMG_VENC_LT, "img_venc_lt", "mm_sel", 8), + GATE_IMG(CLK_IMG_VENC, "img_venc", "mm_sel", 9), +}; + +static void __init mtk_imgsys_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + int r; + + clk_data = mtk_alloc_clk_data(CLK_IMG_NR); + + mtk_clk_register_gates(node, img_clks, ARRAY_SIZE(img_clks), + clk_data); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); +} +CLK_OF_DECLARE(mtk_imgsys, "mediatek,mt2701-imgsys", mtk_imgsys_init); + +static const struct mtk_gate_regs vdec0_cg_regs __initconst = { + .set_ofs = 0x0000, + .clr_ofs = 0x0004, + .sta_ofs = 0x0000, +}; + +static const struct mtk_gate_regs vdec1_cg_regs __initconst = { + .set_ofs = 0x0008, + .clr_ofs = 0x000c, + .sta_ofs = 0x0008, +}; + +#define GATE_VDEC0(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &vdec0_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr_inv, \ + } + +#define GATE_VDEC1(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &vdec1_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr_inv, \ + } + +static const struct mtk_gate vdec_clks[] __initconst = { + GATE_VDEC0(CLK_VDEC_CKGEN, "vdec_cken", "vdec_sel", 0), + GATE_VDEC1(CLK_VDEC_LARB, "vdec_larb_cken", "mm_sel", 0), +}; + +static void __init mtk_vdecsys_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + int r; + + clk_data = mtk_alloc_clk_data(CLK_VDEC_NR); + + mtk_clk_register_gates(node, vdec_clks, ARRAY_SIZE(vdec_clks), + clk_data); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); +} +CLK_OF_DECLARE(mtk_vdecsys, "mediatek,mt2701-vdecsys", mtk_vdecsys_init); + +static const struct mtk_gate_regs hif_cg_regs __initconst = { + .sta_ofs = 0x0008, +}; + +#define GATE_HIF(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &hif_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_no_setclr_inv, \ + } + +static const struct mtk_gate hif_clks[] __initconst = { + GATE_HIF(CLK_HIFSYS_USB0PHY, "usb0_phy_clk", "ethpll_500m_ck", 21), + GATE_HIF(CLK_HIFSYS_USB1PHY, "usb1_phy_clk", "ethpll_500m_ck", 22), + GATE_HIF(CLK_HIFSYS_PCIE0, "pcie0_clk", "ethpll_500m_ck", 24), + GATE_HIF(CLK_HIFSYS_PCIE1, "pcie1_clk", "ethpll_500m_ck", 25), + GATE_HIF(CLK_HIFSYS_PCIE2, "pcie2_clk", "ethpll_500m_ck", 26), +}; + +static void __init mtk_hifsys_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + int r; + + clk_data = mtk_alloc_clk_data(CLK_HIFSYS_NR); + + mtk_clk_register_gates(node, hif_clks, ARRAY_SIZE(hif_clks), + clk_data); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); +} +CLK_OF_DECLARE(mtk_hifsys, "mediatek,mt2701-hifsys", mtk_hifsys_init); + +static const struct mtk_gate_regs eth_cg_regs __initconst = { + .sta_ofs = 0x0030, +}; + +#define GATE_eth(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = ð_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_no_setclr_inv, \ + } + +static const struct mtk_gate eth_clks[] __initconst = { + GATE_HIF(CLK_ETHSYS_HSDMA, "hsdma_clk", "ethif_sel", 5), + GATE_HIF(CLK_ETHSYS_ESW, "esw_clk", "ethpll_500m_ck", 6), + GATE_HIF(CLK_ETHSYS_GP2, "gp2_clk", "trgpll", 7), + GATE_HIF(CLK_ETHSYS_GP1, "gp1_clk", "ethpll_500m_ck", 8), + GATE_HIF(CLK_ETHSYS_PCM, "pcm_clk", "ethif_sel", 11), + GATE_HIF(CLK_ETHSYS_GDMA, "gdma_clk", "ethif_sel", 14), + GATE_HIF(CLK_ETHSYS_I2S, "i2s_clk", "ethif_sel", 17), + GATE_HIF(CLK_ETHSYS_CRYPTO, "crypto_clk", "ethif_sel", 29), +}; + +static void __init mtk_ethsys_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + int r; + + clk_data = mtk_alloc_clk_data(CLK_ETHSYS_NR); + + mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks), + clk_data); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); +} +CLK_OF_DECLARE(mtk_ethsys, "mediatek,mt2701-ethsys", mtk_ethsys_init); + +static const struct mtk_gate_regs bdp0_cg_regs __initconst = { + .set_ofs = 0x0104, + .clr_ofs = 0x0108, + .sta_ofs = 0x0100, +}; + +static const struct mtk_gate_regs bdp1_cg_regs __initconst = { + .set_ofs = 0x0114, + .clr_ofs = 0x0118, + .sta_ofs = 0x0110, +}; + +#define GATE_BDP0(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &bdp0_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr_inv, \ + } + +#define GATE_BDP1(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &bdp1_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr_inv, \ + } + +static const struct mtk_gate bdp_clks[] __initconst = { + GATE_BDP0(CLK_BDP_BRG_BA, "brg_baclk", "mm_sel", 0), + GATE_BDP0(CLK_BDP_BRG_DRAM, "brg_dram", "mm_sel", 1), + GATE_BDP0(CLK_BDP_LARB_DRAM, "larb_dram", "mm_sel", 2), + GATE_BDP0(CLK_BDP_WR_VDI_PXL, "wr_vdi_pxl", "hdmi_0_deep340m", 3), + GATE_BDP0(CLK_BDP_WR_VDI_DRAM, "wr_vdi_dram", "mm_sel", 4), + GATE_BDP0(CLK_BDP_WR_B, "wr_bclk", "mm_sel", 5), + GATE_BDP0(CLK_BDP_DGI_IN, "dgi_in", "dpi1_sel", 6), + GATE_BDP0(CLK_BDP_DGI_OUT, "dgi_out", "dpi_sel", 7), + GATE_BDP0(CLK_BDP_FMT_MAST_27, "fmt_mast_27", "dpi1_sel", 8), + GATE_BDP0(CLK_BDP_FMT_B, "fmt_bclk", "mm_sel", 9), + GATE_BDP0(CLK_BDP_OSD_B, "osd_bclk", "mm_sel", 10), + GATE_BDP0(CLK_BDP_OSD_DRAM, "osd_dram", "mm_sel", 11), + GATE_BDP0(CLK_BDP_OSD_AGENT, "osd_agent", "osd_sel", 12), + GATE_BDP0(CLK_BDP_OSD_PXL, "osd_pxl", "dpi1_sel", 13), + GATE_BDP0(CLK_BDP_RLE_B, "rle_bclk", "mm_sel", 14), + GATE_BDP0(CLK_BDP_RLE_AGENT, "rle_agent", "mm_sel", 15), + GATE_BDP0(CLK_BDP_RLE_DRAM, "rle_dram", "mm_sel", 16), + GATE_BDP0(CLK_BDP_F27M, "f27m", "di_sel", 17), + GATE_BDP0(CLK_BDP_F27M_VDOUT, "f27m_vdout", "di_sel", 18), + GATE_BDP0(CLK_BDP_F27_74_74, "f27_74_74", "di_sel", 19), + GATE_BDP0(CLK_BDP_F2FS, "f2fs", "di_sel", 20), + GATE_BDP0(CLK_BDP_F2FS74_148, "f2fs74_148", "di_sel", 21), + GATE_BDP0(CLK_BDP_FB, "fbclk", "mm_sel", 22), + GATE_BDP0(CLK_BDP_VDO_DRAM, "vdo_dram", "mm_sel", 23), + GATE_BDP0(CLK_BDP_VDO_2FS, "vdo_2fs", "di_sel", 24), + GATE_BDP0(CLK_BDP_VDO_B, "vdo_bclk", "mm_sel", 25), + GATE_BDP0(CLK_BDP_WR_DI_PXL, "wr_di_pxl", "di_sel", 26), + GATE_BDP0(CLK_BDP_WR_DI_DRAM, "wr_di_dram", "mm_sel", 27), + GATE_BDP0(CLK_BDP_WR_DI_B, "wr_di_bclk", "mm_sel", 28), + GATE_BDP0(CLK_BDP_NR_PXL, "nr_pxl", "nr_sel", 29), + GATE_BDP0(CLK_BDP_NR_DRAM, "nr_dram", "mm_sel", 30), + GATE_BDP0(CLK_BDP_NR_B, "nr_bclk", "mm_sel", 31), + GATE_BDP1(CLK_BDP_RX_F, "rx_fclk", "hadds2_fbclk", 0), + GATE_BDP1(CLK_BDP_RX_X, "rx_xclk", "clk26m", 1), + GATE_BDP1(CLK_BDP_RXPDT, "rxpdtclk", "hdmi_0_pix340m", 2), + GATE_BDP1(CLK_BDP_RX_CSCL_N, "rx_cscl_n", "clk26m", 3), + GATE_BDP1(CLK_BDP_RX_CSCL, "rx_cscl", "clk26m", 4), + GATE_BDP1(CLK_BDP_RX_DDCSCL_N, "rx_ddcscl_n", "hdmi_scl_rx", 5), + GATE_BDP1(CLK_BDP_RX_DDCSCL, "rx_ddcscl", "hdmi_scl_rx", 6), + GATE_BDP1(CLK_BDP_RX_VCO, "rx_vcoclk", "hadds2pll_294m", 7), + GATE_BDP1(CLK_BDP_RX_DP, "rx_dpclk", "hdmi_0_pll340m", 8), + GATE_BDP1(CLK_BDP_RX_P, "rx_pclk", "hdmi_0_pll340m", 9), + GATE_BDP1(CLK_BDP_RX_M, "rx_mclk", "hadds2pll_294m", 10), + GATE_BDP1(CLK_BDP_RX_PLL, "rx_pllclk", "hdmi_0_pix340m", 11), + GATE_BDP1(CLK_BDP_BRG_RT_B, "brg_rt_bclk", "mm_sel", 12), + GATE_BDP1(CLK_BDP_BRG_RT_DRAM, "brg_rt_dram", "mm_sel", 13), + GATE_BDP1(CLK_BDP_LARBRT_DRAM, "larbrt_dram", "mm_sel", 14), + GATE_BDP1(CLK_BDP_TMDS_SYN, "tmds_syn", "hdmi_0_pll340m", 15), + GATE_BDP1(CLK_BDP_HDMI_MON, "hdmi_mon", "hdmi_0_mon", 16), +}; + +static void __init mtk_bdpsys_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + int r; + + clk_data = mtk_alloc_clk_data(CLK_BDP_NR); + + mtk_clk_register_gates(node, bdp_clks, ARRAY_SIZE(bdp_clks), + clk_data); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); +} +CLK_OF_DECLARE(mtk_bdpsys, "mediatek,mt2701-bdpsys", mtk_bdpsys_init); + +#define MT8590_PLL_FMAX (2000 * MHZ) +#define CON0_MT8590_RST_BAR BIT(27) + +#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, \ + _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift) { \ + .id = _id, \ + .name = _name, \ + .reg = _reg, \ + .pwr_reg = _pwr_reg, \ + .en_mask = _en_mask, \ + .flags = _flags, \ + .rst_bar_mask = CON0_MT8590_RST_BAR, \ + .fmax = MT8590_PLL_FMAX, \ + .pcwbits = _pcwbits, \ + .pd_reg = _pd_reg, \ + .pd_shift = _pd_shift, \ + .tuner_reg = _tuner_reg, \ + .pcw_reg = _pcw_reg, \ + .pcw_shift = _pcw_shift, \ + } + +static const struct mtk_pll_data apmixed_plls[] = { + PLL(CLK_APMIXED_ARMPLL, "armpll", 0x200, 0x20c, 0x80000001, 0, + 21, 0x204, 24, 0x0, 0x204, 0), + PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x210, 0x21c, 0xf0000001, + HAVE_RST_BAR, 21, 0x210, 4, 0x0, 0x214, 0), + PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x220, 0x22c, 0xf3000001, + HAVE_RST_BAR, 7, 0x220, 4, 0x0, 0x224, 14), + PLL(CLK_APMIXED_MMPLL, "mmpll", 0x230, 0x23c, 0x00000001, 0, + 21, 0x230, 4, 0x0, 0x234, 0), + PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x240, 0x24c, 0x00000001, 0, + 21, 0x240, 4, 0x0, 0x244, 0), + PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x250, 0x25c, 0x00000001, 0, + 21, 0x250, 4, 0x0, 0x254, 0), + PLL(CLK_APMIXED_AUD1PLL, "aud1pll", 0x270, 0x27c, 0x00000001, 0, + 31, 0x270, 4, 0x0, 0x274, 0), + PLL(CLK_APMIXED_TRGPLL, "trgpll", 0x280, 0x28c, 0x00000001, 0, + 31, 0x280, 4, 0x0, 0x284, 0), + PLL(CLK_APMIXED_ETHPLL, "ethpll", 0x290, 0x29c, 0x00000001, 0, + 31, 0x290, 4, 0x0, 0x294, 0), + PLL(CLK_APMIXED_VDECPLL, "vdecpll", 0x2a0, 0x2ac, 0x00000001, 0, + 31, 0x2a0, 4, 0x0, 0x2a4, 0), + PLL(CLK_APMIXED_HADDS2PLL, "hadds2pll", 0x2b0, 0x2bc, 0x00000001, 0, + 31, 0x2b0, 4, 0x0, 0x2b4, 0), + PLL(CLK_APMIXED_AUD2PLL, "aud2pll", 0x2c0, 0x2cc, 0x00000001, 0, + 31, 0x2c0, 4, 0x0, 0x2c4, 0), + PLL(CLK_APMIXED_TVD2PLL, "tvd2pll", 0x2d0, 0x2dc, 0x00000001, 0, + 21, 0x2d0, 4, 0x0, 0x2d4, 0), +}; + +static void __init mtk_apmixedsys_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + int r; + + clk_data = mtk_alloc_clk_data(ARRAY_SIZE(apmixed_plls)); + if (!clk_data) + return; + + mtk_clk_register_plls(node, apmixed_plls, ARRAY_SIZE(apmixed_plls), + clk_data); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); +} +CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt2701-apmixedsys", + mtk_apmixedsys_init); diff --git a/drivers/clk/mediatek/clk-mtk.c b/drivers/clk/mediatek/clk-mtk.c index cf08db6..be19a41 100644 --- a/drivers/clk/mediatek/clk-mtk.c +++ b/drivers/clk/mediatek/clk-mtk.c @@ -242,3 +242,28 @@ void __init mtk_clk_register_composites(const struct mtk_composite *mcs, clk_data->clks[mc->id] = clk; } } + +void __init mtk_clk_register_dividers(const struct mtk_clk_divider *mcds, + int num, void __iomem *base, spinlock_t *lock, + struct clk_onecell_data *clk_data) +{ + struct clk *clk; + int i; + + for (i = 0; i < num; i++) { + const struct mtk_clk_divider *mcd = &mcds[i]; + + clk = clk_register_divider(NULL, mcd->name, mcd->parent_name, + mcd->flags, base + mcd->div_reg, mcd->div_shift, + mcd->div_width, mcd->clk_divider_flags, lock); + + if (IS_ERR(clk)) { + pr_err("Failed to register clk %s: %ld\n", + mcd->name, PTR_ERR(clk)); + continue; + } + + if (clk_data) + clk_data->clks[mcd->id] = clk; + } +} diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h index 32d2e45..60701e8 100644 --- a/drivers/clk/mediatek/clk-mtk.h +++ b/drivers/clk/mediatek/clk-mtk.h @@ -110,7 +110,8 @@ struct mtk_composite { .flags = CLK_SET_RATE_PARENT, \ } -#define DIV_GATE(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, _div_width, _div_shift) { \ +#define DIV_GATE(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, \ + _div_width, _div_shift) { \ .id = _id, \ .parent = _parent, \ .name = _name, \ @@ -145,8 +146,36 @@ struct mtk_gate { const struct clk_ops *ops; }; -int mtk_clk_register_gates(struct device_node *node, const struct mtk_gate *clks, - int num, struct clk_onecell_data *clk_data); +int mtk_clk_register_gates(struct device_node *node, + const struct mtk_gate *clks, int num, + struct clk_onecell_data *clk_data); + +struct mtk_clk_divider { + int id; + const char *name; + const char *parent_name; + unsigned long flags; + + uint32_t div_reg; + unsigned char div_shift; + unsigned char div_width; + unsigned char clk_divider_flags; + const struct clk_div_table *clk_div_table; +}; + +#define DIV_ADJ(_id, _name, _parent, _reg, _shift, _width) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .flags = CLK_SET_RATE_PARENT, \ + .div_reg = _reg, \ + .div_shift = _shift, \ + .div_width = _width, \ +} + +void mtk_clk_register_dividers(const struct mtk_clk_divider *mcds, + int num, void __iomem *base, spinlock_t *lock, + struct clk_onecell_data *clk_data); struct clk_onecell_data *mtk_alloc_clk_data(unsigned int clk_num); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 14+ messages in thread
[parent not found: <1451975422-31174-5-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>]
* Re: [PATCH v2 4/6] clk: mediatek: Add MT2701 clock support [not found] ` <1451975422-31174-5-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> @ 2016-01-05 9:30 ` Philipp Zabel 2016-01-05 9:59 ` James Liao 0 siblings, 1 reply; 14+ messages in thread From: Philipp Zabel @ 2016-01-05 9:30 UTC (permalink / raw) To: James Liao Cc: Matthias Brugger, Mike Turquette, Stephen Boyd, devicetree-u79uwXL29TY76Z2rM5mHXA, Sascha Hauer, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Daniel Kurtz, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Shunli Wang, linux-clk-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r Hi James, Am Dienstag, den 05.01.2016, 14:30 +0800 schrieb James Liao: > From: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > Add MT2701 clock support, include topckgen, apmixedsys, > infracfg, pericfg and subsystem clocks. > > Signed-off-by: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > --- > drivers/clk/mediatek/Kconfig | 8 + > drivers/clk/mediatek/Makefile | 1 + > drivers/clk/mediatek/clk-gate.c | 56 ++ > drivers/clk/mediatek/clk-gate.h | 2 + > drivers/clk/mediatek/clk-mt2701.c | 1210 +++++++++++++++++++++++++++++++++++++ > drivers/clk/mediatek/clk-mtk.c | 25 + > drivers/clk/mediatek/clk-mtk.h | 35 +- > 7 files changed, 1334 insertions(+), 3 deletions(-) > create mode 100644 drivers/clk/mediatek/clk-mt2701.c > > diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig > index dc224e6..6c7cdc0 100644 > --- a/drivers/clk/mediatek/Kconfig > +++ b/drivers/clk/mediatek/Kconfig > @@ -6,6 +6,14 @@ config COMMON_CLK_MEDIATEK > ---help--- > Mediatek SoCs' clock support. > > +config COMMON_CLK_MT2701 > + bool "Clock driver for Mediatek MT2701 and MT7623" > + depends on COMMON_CLK > + select COMMON_CLK_MEDIATEK > + default ARCH_MEDIATEK > + ---help--- > + This driver supports Mediatek MT2701 and MT7623 clocks. > + > config COMMON_CLK_MT8135 > bool "Clock driver for Mediatek MT8135" > depends on COMMON_CLK > diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile > index 32e7222..5b2b91b 100644 > --- a/drivers/clk/mediatek/Makefile > +++ b/drivers/clk/mediatek/Makefile > @@ -1,4 +1,5 @@ > obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o > obj-$(CONFIG_RESET_CONTROLLER) += reset.o > +obj-$(CONFIG_COMMON_CLK_MT2701) += clk-mt2701.o > obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o > obj-$(CONFIG_COMMON_CLK_MT8173) += clk-mt8173.o > diff --git a/drivers/clk/mediatek/clk-gate.c b/drivers/clk/mediatek/clk-gate.c > index 576bdb7..38badb4 100644 > --- a/drivers/clk/mediatek/clk-gate.c > +++ b/drivers/clk/mediatek/clk-gate.c > @@ -61,6 +61,26 @@ static void mtk_cg_clr_bit(struct clk_hw *hw) > regmap_write(cg->regmap, cg->clr_ofs, BIT(cg->bit)); > } > > +static void mtk_cg_set_bit_no_setclr(struct clk_hw *hw) > +{ > + struct mtk_clk_gate *cg = to_clk_gate(hw); > + u32 val; > + > + regmap_read(cg->regmap, cg->sta_ofs, &val); > + val |= BIT(cg->bit); > + regmap_write(cg->regmap, cg->sta_ofs, val); You can use regmap_update_bits here: u32 bit = BIT(cg->bit); regmap_update_bits(cg->regmap, cg->sta_ofs, bit, bit); > +} > + > +static void mtk_cg_clr_bit_no_setclr(struct clk_hw *hw) > +{ > + struct mtk_clk_gate *cg = to_clk_gate(hw); > + u32 val; > + > + regmap_read(cg->regmap, cg->sta_ofs, &val); > + val &= ~(BIT(cg->bit)); > + regmap_write(cg->regmap, cg->sta_ofs, val); and here: u32 bit = BIT(cg->bit); regmap_update_bits(cg->regmap, cg->sta_ofs, bit, 0); best regards Philipp -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 4/6] clk: mediatek: Add MT2701 clock support 2016-01-05 9:30 ` Philipp Zabel @ 2016-01-05 9:59 ` James Liao 0 siblings, 0 replies; 14+ messages in thread From: James Liao @ 2016-01-05 9:59 UTC (permalink / raw) To: Philipp Zabel Cc: Matthias Brugger, Mike Turquette, Stephen Boyd, devicetree, Sascha Hauer, srv_heupstream, linux-kernel, Daniel Kurtz, linux-mediatek, Shunli Wang, linux-clk, linux-arm-kernel Hi Philipp, On Tue, 2016-01-05 at 10:30 +0100, Philipp Zabel wrote: > Hi James, > > Am Dienstag, den 05.01.2016, 14:30 +0800 schrieb James Liao: > > From: Shunli Wang <shunli.wang@mediatek.com> > > > > Add MT2701 clock support, include topckgen, apmixedsys, > > infracfg, pericfg and subsystem clocks. > > > > Signed-off-by: Shunli Wang <shunli.wang@mediatek.com> > > Signed-off-by: James Liao <jamesjj.liao@mediatek.com> > > --- > > drivers/clk/mediatek/Kconfig | 8 + > > drivers/clk/mediatek/Makefile | 1 + > > drivers/clk/mediatek/clk-gate.c | 56 ++ > > drivers/clk/mediatek/clk-gate.h | 2 + > > drivers/clk/mediatek/clk-mt2701.c | 1210 +++++++++++++++++++++++++++++++++++++ > > drivers/clk/mediatek/clk-mtk.c | 25 + > > drivers/clk/mediatek/clk-mtk.h | 35 +- > > 7 files changed, 1334 insertions(+), 3 deletions(-) > > create mode 100644 drivers/clk/mediatek/clk-mt2701.c > > > > diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig > > index dc224e6..6c7cdc0 100644 > > --- a/drivers/clk/mediatek/Kconfig > > +++ b/drivers/clk/mediatek/Kconfig > > @@ -6,6 +6,14 @@ config COMMON_CLK_MEDIATEK > > ---help--- > > Mediatek SoCs' clock support. > > > > +config COMMON_CLK_MT2701 > > + bool "Clock driver for Mediatek MT2701 and MT7623" > > + depends on COMMON_CLK > > + select COMMON_CLK_MEDIATEK > > + default ARCH_MEDIATEK > > + ---help--- > > + This driver supports Mediatek MT2701 and MT7623 clocks. > > + > > config COMMON_CLK_MT8135 > > bool "Clock driver for Mediatek MT8135" > > depends on COMMON_CLK > > diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile > > index 32e7222..5b2b91b 100644 > > --- a/drivers/clk/mediatek/Makefile > > +++ b/drivers/clk/mediatek/Makefile > > @@ -1,4 +1,5 @@ > > obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o > > obj-$(CONFIG_RESET_CONTROLLER) += reset.o > > +obj-$(CONFIG_COMMON_CLK_MT2701) += clk-mt2701.o > > obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o > > obj-$(CONFIG_COMMON_CLK_MT8173) += clk-mt8173.o > > diff --git a/drivers/clk/mediatek/clk-gate.c b/drivers/clk/mediatek/clk-gate.c > > index 576bdb7..38badb4 100644 > > --- a/drivers/clk/mediatek/clk-gate.c > > +++ b/drivers/clk/mediatek/clk-gate.c > > @@ -61,6 +61,26 @@ static void mtk_cg_clr_bit(struct clk_hw *hw) > > regmap_write(cg->regmap, cg->clr_ofs, BIT(cg->bit)); > > } > > > > +static void mtk_cg_set_bit_no_setclr(struct clk_hw *hw) > > +{ > > + struct mtk_clk_gate *cg = to_clk_gate(hw); > > + u32 val; > > + > > + regmap_read(cg->regmap, cg->sta_ofs, &val); > > + val |= BIT(cg->bit); > > + regmap_write(cg->regmap, cg->sta_ofs, val); > > You can use regmap_update_bits here: > > u32 bit = BIT(cg->bit); > regmap_update_bits(cg->regmap, cg->sta_ofs, bit, bit); > > > +} > > + > > +static void mtk_cg_clr_bit_no_setclr(struct clk_hw *hw) > > +{ > > + struct mtk_clk_gate *cg = to_clk_gate(hw); > > + u32 val; > > + > > + regmap_read(cg->regmap, cg->sta_ofs, &val); > > + val &= ~(BIT(cg->bit)); > > + regmap_write(cg->regmap, cg->sta_ofs, val); > > and here: > > u32 bit = BIT(cg->bit); > regmap_update_bits(cg->regmap, cg->sta_ofs, bit, 0); OK. I'll change it in next patch. Thanks. Best regards, James ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 5/6] reset: mediatek: mt2701 reset controller dt-binding file [not found] ` <1451975422-31174-1-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> ` (2 preceding siblings ...) 2016-01-05 6:30 ` [PATCH v2 4/6] clk: mediatek: Add MT2701 clock support James Liao @ 2016-01-05 6:30 ` James Liao [not found] ` <1451975422-31174-6-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> 3 siblings, 1 reply; 14+ messages in thread From: James Liao @ 2016-01-05 6:30 UTC (permalink / raw) To: Matthias Brugger, Mike Turquette, Stephen Boyd Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Sascha Hauer, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Shunli Wang, Philipp Zabel, linux-clk-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r From: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> Dt-binding file about reset controller is used to provide kinds of definition, which is referenced by dts file and IC-specified reset controller driver code. Signed-off-by: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- .../dt-bindings/reset-controller/mt2701-resets.h | 74 ++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 include/dt-bindings/reset-controller/mt2701-resets.h diff --git a/include/dt-bindings/reset-controller/mt2701-resets.h b/include/dt-bindings/reset-controller/mt2701-resets.h new file mode 100644 index 0000000..00efeb0 --- /dev/null +++ b/include/dt-bindings/reset-controller/mt2701-resets.h @@ -0,0 +1,74 @@ +/* + * Copyright (c) 2015 MediaTek, Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT2701 +#define _DT_BINDINGS_RESET_CONTROLLER_MT2701 + +/* INFRACFG resets */ +#define MT2701_INFRA_EMI_REG_RST 0 +#define MT2701_INFRA_DRAMC0_A0_RST 1 +#define MT2701_INFRA_FHCTL_RST 2 +#define MT2701_INFRA_APCIRQ_EINT_RST 3 +#define MT2701_INFRA_APXGPT_RST 4 +#define MT2701_INFRA_SCPSYS_RST 5 +#define MT2701_INFRA_KP_RST 6 +#define MT2701_INFRA_PMIC_WRAP_RST 7 +#define MT2701_INFRA_MIPI_RST 8 +#define MT2701_INFRA_IRRX_RST 9 +#define MT2701_INFRA_CEC_RST 10 +#define MT2701_INFRA_EMI_RST 32 +#define MT2701_INFRA_DRAMC0_RST 34 +#define MT2701_INFRA_TRNG_RST 37 +#define MT2701_INFRA_SYSIRQ_RST 38 + +/* PERICFG resets */ +#define MT2701_PERI_UART0_SW_RST 0 +#define MT2701_PERI_UART1_SW_RST 1 +#define MT2701_PERI_UART2_SW_RST 2 +#define MT2701_PERI_UART3_SW_RST 3 +#define MT2701_PERI_GCPU_SW_RST 5 +#define MT2701_PERI_BTIF_SW_RST 6 +#define MT2701_PERI_PWM_SW_RST 8 +#define MT2701_PERI_AUXADC_SW_RST 10 +#define MT2701_PERI_DMA_SW_RST 11 +#define MT2701_PERI_NFI_SW_RST 14 +#define MT2701_PERI_NLI_SW_RST 15 +#define MT2701_PERI_THERM_SW_RST 16 +#define MT2701_PERI_MSDC2_SW_RST 17 +#define MT2701_PERI_MSDC0_SW_RST 19 +#define MT2701_PERI_MSDC1_SW_RST 20 +#define MT2701_PERI_I2C0_SW_RST 22 +#define MT2701_PERI_I2C1_SW_RST 23 +#define MT2701_PERI_I2C2_SW_RST 24 +#define MT2701_PERI_I2C3_SW_RST 25 +#define MT2701_PERI_USB_SW_RST 28 +#define MT2701_PERI_ETH_SW_RST 29 +#define MT2701_PERI_SPI0_SW_RST 33 + +/* TOPRGU resets */ +#define MT2701_TOPRGU_INFRA_RST 0 +#define MT2701_TOPRGU_MM_RST 1 +#define MT2701_TOPRGU_MFG_RST 2 +#define MT2701_TOPRGU_ETHDMA_RST 3 +#define MT2701_TOPRGU_VDEC_RST 4 +#define MT2701_TOPRGU_VENC_IMG_RST 5 +#define MT2701_TOPRGU_DDRPHY_RST 6 +#define MT2701_TOPRGU_MD_RST 7 +#define MT2701_TOPRGU_INFRA_AO_RST 8 +#define MT2701_TOPRGU_CONN_RST 9 +#define MT2701_TOPRGU_APMIXED_RST 10 +#define MT2701_TOPRGU_HIFSYS_RST 11 +#define MT2701_TOPRGU_CONN_MCU_RST 12 +#define MT2701_TOPRGU_BDP_DISP_RST 13 + +#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT2701 */ -- 1.9.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
[parent not found: <1451975422-31174-6-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>]
* Re: [PATCH v2 5/6] reset: mediatek: mt2701 reset controller dt-binding file [not found] ` <1451975422-31174-6-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> @ 2016-01-05 9:31 ` Philipp Zabel 2016-01-05 10:00 ` James Liao 0 siblings, 1 reply; 14+ messages in thread From: Philipp Zabel @ 2016-01-05 9:31 UTC (permalink / raw) To: James Liao Cc: Matthias Brugger, Mike Turquette, Stephen Boyd, devicetree-u79uwXL29TY76Z2rM5mHXA, Sascha Hauer, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Daniel Kurtz, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Shunli Wang, linux-clk-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r Am Dienstag, den 05.01.2016, 14:30 +0800 schrieb James Liao: > From: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > Dt-binding file about reset controller is used to provide > kinds of definition, which is referenced by dts file and > IC-specified reset controller driver code. > > Signed-off-by: Shunli Wang <shunli.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > --- > .../dt-bindings/reset-controller/mt2701-resets.h | 74 ++++++++++++++++++++++ > 1 file changed, 74 insertions(+) > create mode 100644 include/dt-bindings/reset-controller/mt2701-resets.h > > diff --git a/include/dt-bindings/reset-controller/mt2701-resets.h b/include/dt-bindings/reset-controller/mt2701-resets.h No new files in include/dt-bindings/reset-controller, please. This should go into include/dt-bindings/reset. regards Philipp -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 5/6] reset: mediatek: mt2701 reset controller dt-binding file 2016-01-05 9:31 ` Philipp Zabel @ 2016-01-05 10:00 ` James Liao 0 siblings, 0 replies; 14+ messages in thread From: James Liao @ 2016-01-05 10:00 UTC (permalink / raw) To: Philipp Zabel Cc: Matthias Brugger, Mike Turquette, Stephen Boyd, devicetree, Sascha Hauer, srv_heupstream, linux-kernel, Daniel Kurtz, linux-mediatek, Shunli Wang, linux-clk, linux-arm-kernel Hi Philipp, On Tue, 2016-01-05 at 10:31 +0100, Philipp Zabel wrote: > Am Dienstag, den 05.01.2016, 14:30 +0800 schrieb James Liao: > > From: Shunli Wang <shunli.wang@mediatek.com> > > > > Dt-binding file about reset controller is used to provide > > kinds of definition, which is referenced by dts file and > > IC-specified reset controller driver code. > > > > Signed-off-by: Shunli Wang <shunli.wang@mediatek.com> > > --- > > .../dt-bindings/reset-controller/mt2701-resets.h | 74 ++++++++++++++++++++++ > > 1 file changed, 74 insertions(+) > > create mode 100644 include/dt-bindings/reset-controller/mt2701-resets.h > > > > diff --git a/include/dt-bindings/reset-controller/mt2701-resets.h b/include/dt-bindings/reset-controller/mt2701-resets.h > > No new files in include/dt-bindings/reset-controller, please. > This should go into include/dt-bindings/reset. OK, I'll move it to include/dt-bindings/reset/. Best regards, James ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 2/6] dt-bindings: ARM: Mediatek: Document bindings for MT2701 2016-01-05 6:30 [PATCH v2 0/6] Add clock support for Mediatek MT2701 James Liao [not found] ` <1451975422-31174-1-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> @ 2016-01-05 6:30 ` James Liao 2016-01-06 15:08 ` Rob Herring 2016-01-05 6:30 ` [PATCH v2 6/6] reset: mediatek: mt2701 reset driver James Liao 2 siblings, 1 reply; 14+ messages in thread From: James Liao @ 2016-01-05 6:30 UTC (permalink / raw) To: Matthias Brugger, Mike Turquette, Stephen Boyd Cc: Sascha Hauer, Daniel Kurtz, Philipp Zabel, srv_heupstream, devicetree, linux-arm-kernel, linux-kernel, linux-mediatek, linux-clk, James Liao This patch adds the binding documentation for apmixedsys, bdpsys, ethsys, hifsys, imgsys, infracfg, mmsys, pericfg, topckgen and vdecsys for Mediatek MT2701. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> --- .../bindings/arm/mediatek/mediatek,apmixedsys.txt | 1 + .../bindings/arm/mediatek/mediatek,bdpsys.txt | 22 ++++++++++++++++++++++ .../bindings/arm/mediatek/mediatek,ethsys.txt | 22 ++++++++++++++++++++++ .../bindings/arm/mediatek/mediatek,hifsys.txt | 22 ++++++++++++++++++++++ .../bindings/arm/mediatek/mediatek,imgsys.txt | 1 + .../bindings/arm/mediatek/mediatek,infracfg.txt | 1 + .../bindings/arm/mediatek/mediatek,mmsys.txt | 1 + .../bindings/arm/mediatek/mediatek,pericfg.txt | 1 + .../bindings/arm/mediatek/mediatek,topckgen.txt | 1 + .../bindings/arm/mediatek/mediatek,vdecsys.txt | 1 + 10 files changed, 73 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index 936166f..a701e19 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -6,6 +6,7 @@ The Mediatek apmixedsys controller provides the PLLs to the system. Required Properties: - compatible: Should be: + - "mediatek,mt2701-apmixedsys" - "mediatek,mt8135-apmixedsys" - "mediatek,mt8173-apmixedsys" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt new file mode 100644 index 0000000..4137196 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt @@ -0,0 +1,22 @@ +Mediatek bdpsys controller +============================ + +The Mediatek bdpsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt2701-bdpsys", "syscon" +- #clock-cells: Must be 1 + +The bdpsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +bdpsys: clock-controller@1c000000 { + compatible = "mediatek,mt2701-bdpsys", "syscon"; + reg = <0 0x1c000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt new file mode 100644 index 0000000..768f3a5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt @@ -0,0 +1,22 @@ +Mediatek ethsys controller +============================ + +The Mediatek ethsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt2701-ethsys", "syscon" +- #clock-cells: Must be 1 + +The ethsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +ethsys: clock-controller@1b000000 { + compatible = "mediatek,mt2701-ethsys", "syscon"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt new file mode 100644 index 0000000..b7a39b6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt @@ -0,0 +1,22 @@ +Mediatek hifsys controller +============================ + +The Mediatek hifsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt2701-hifsys", "syscon" +- #clock-cells: Must be 1 + +The hifsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +hifsys: clock-controller@1a000000 { + compatible = "mediatek,mt2701-hifsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt index b1f2ce1..9bda7f7 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -6,6 +6,7 @@ The Mediatek imgsys controller provides various clocks to the system. Required Properties: - compatible: Should be: + - "mediatek,mt2701-imgsys", "syscon" - "mediatek,mt8173-imgsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index f6cd3e4..2f11a69 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -7,6 +7,7 @@ outputs to the system. Required Properties: - compatible: Should be: + - "mediatek,mt2701-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index 4385946..c9d9d43 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -6,6 +6,7 @@ The Mediatek mmsys controller provides various clocks to the system. Required Properties: - compatible: Should be: + - "mediatek,mt2701-mmsys", "syscon" - "mediatek,mt8173-mmsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt index f25b854..d3454cd 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -7,6 +7,7 @@ outputs to the system. Required Properties: - compatible: Should be: + - "mediatek,mt2701-pericfg", "syscon" - "mediatek,mt8135-pericfg", "syscon" - "mediatek,mt8173-pericfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index f9e9179..602e5bc 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -6,6 +6,7 @@ The Mediatek topckgen controller provides various clocks to the system. Required Properties: - compatible: Should be: + - "mediatek,mt2701-topckgen" - "mediatek,mt8135-topckgen" - "mediatek,mt8173-topckgen" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt index 1faacf1..f5b1e7d 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt @@ -6,6 +6,7 @@ The Mediatek vdecsys controller provides various clocks to the system. Required Properties: - compatible: Should be: + - "mediatek,mt2701-vdecsys", "syscon" - "mediatek,mt8173-vdecsys", "syscon" - #clock-cells: Must be 1 -- 1.9.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v2 2/6] dt-bindings: ARM: Mediatek: Document bindings for MT2701 2016-01-05 6:30 ` [PATCH v2 2/6] dt-bindings: ARM: Mediatek: Document bindings for MT2701 James Liao @ 2016-01-06 15:08 ` Rob Herring 2016-01-13 3:39 ` James Liao 0 siblings, 1 reply; 14+ messages in thread From: Rob Herring @ 2016-01-06 15:08 UTC (permalink / raw) To: James Liao Cc: Matthias Brugger, Mike Turquette, Stephen Boyd, Sascha Hauer, Daniel Kurtz, Philipp Zabel, srv_heupstream, devicetree, linux-arm-kernel, linux-kernel, linux-mediatek, linux-clk On Tue, Jan 05, 2016 at 02:30:18PM +0800, James Liao wrote: > This patch adds the binding documentation for apmixedsys, bdpsys, > ethsys, hifsys, imgsys, infracfg, mmsys, pericfg, topckgen and > vdecsys for Mediatek MT2701. > > Signed-off-by: James Liao <jamesjj.liao@mediatek.com> [...] > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt > new file mode 100644 > index 0000000..4137196 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt > @@ -0,0 +1,22 @@ > +Mediatek bdpsys controller > +============================ > + > +The Mediatek bdpsys controller provides various clocks to the system. > + > +Required Properties: > + > +- compatible: Should be: > + - "mediatek,mt2701-bdpsys", "syscon" If this block and others only provide clocks, then why do you need syscon here? If it is more that clocks, then the description is wrong. Rob ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 2/6] dt-bindings: ARM: Mediatek: Document bindings for MT2701 2016-01-06 15:08 ` Rob Herring @ 2016-01-13 3:39 ` James Liao 0 siblings, 0 replies; 14+ messages in thread From: James Liao @ 2016-01-13 3:39 UTC (permalink / raw) To: Rob Herring Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Sascha Hauer, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, Mike Turquette, Stephen Boyd, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Philipp Zabel, Matthias Brugger, linux-clk-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r Hi Rob, On Wed, 2016-01-06 at 09:08 -0600, Rob Herring wrote: > On Tue, Jan 05, 2016 at 02:30:18PM +0800, James Liao wrote: > > This patch adds the binding documentation for apmixedsys, bdpsys, > > ethsys, hifsys, imgsys, infracfg, mmsys, pericfg, topckgen and > > vdecsys for Mediatek MT2701. > > > > Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > [...] > > > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt > > new file mode 100644 > > index 0000000..4137196 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt > > @@ -0,0 +1,22 @@ > > +Mediatek bdpsys controller > > +============================ > > + > > +The Mediatek bdpsys controller provides various clocks to the system. > > + > > +Required Properties: > > + > > +- compatible: Should be: > > + - "mediatek,mt2701-bdpsys", "syscon" > > If this block and others only provide clocks, then why do you need > syscon here? If it is more that clocks, then the description is wrong. Sorry for late reply. In bdpsys and other similar subsystems, clock controlling and other feature controlling share the same register space. That means we may have multiple DT nodes with the same reg (register address) property. But it's not a good idea because we may have racing issue when multiple drivers share the same register space. With syscon, drivers that need share the same register base with bdpsys can safely control registers through regmap APIs. These subsystem nodes described in arm/mediatek/ are clock controllers, some of them may be the reset controller at the same time. Other subsystem features will have their own DT nodes and share the same register space by referring to these clock controllers. Best regards, James ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 6/6] reset: mediatek: mt2701 reset driver 2016-01-05 6:30 [PATCH v2 0/6] Add clock support for Mediatek MT2701 James Liao [not found] ` <1451975422-31174-1-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> 2016-01-05 6:30 ` [PATCH v2 2/6] dt-bindings: ARM: Mediatek: Document bindings for MT2701 James Liao @ 2016-01-05 6:30 ` James Liao 2016-01-05 9:31 ` Philipp Zabel 2 siblings, 1 reply; 14+ messages in thread From: James Liao @ 2016-01-05 6:30 UTC (permalink / raw) To: Matthias Brugger, Mike Turquette, Stephen Boyd Cc: Sascha Hauer, Daniel Kurtz, Philipp Zabel, srv_heupstream, devicetree, linux-arm-kernel, linux-kernel, linux-mediatek, linux-clk, Shunli Wang From: Shunli Wang <shunli.wang@mediatek.com> In infrasys and perifsys, there are many reset control bits for kinds of modules. These bits are used as actual reset controllers to be registered into kernel's generic reset controller framework. Signed-off-by: Shunli Wang <shunli.wang@mediatek.com> --- drivers/clk/mediatek/clk-mt2701.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/clk/mediatek/clk-mt2701.c b/drivers/clk/mediatek/clk-mt2701.c index 2f521f4..39472e4 100644 --- a/drivers/clk/mediatek/clk-mt2701.c +++ b/drivers/clk/mediatek/clk-mt2701.c @@ -665,6 +665,8 @@ static void __init mtk_infrasys_init(struct device_node *node) if (r) pr_err("%s(): could not register clock provider: %d\n", __func__, r); + + mtk_register_reset_controller(node, 2, 0x30); } CLK_OF_DECLARE(mtk_infrasys, "mediatek,mt2701-infracfg", mtk_infrasys_init); @@ -782,6 +784,8 @@ static void __init mtk_pericfg_init(struct device_node *node) if (r) pr_err("%s(): could not register clock provider: %d\n", __func__, r); + + mtk_register_reset_controller(node, 2, 0x0); } CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt2701-pericfg", mtk_pericfg_init); -- 1.9.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v2 6/6] reset: mediatek: mt2701 reset driver 2016-01-05 6:30 ` [PATCH v2 6/6] reset: mediatek: mt2701 reset driver James Liao @ 2016-01-05 9:31 ` Philipp Zabel 0 siblings, 0 replies; 14+ messages in thread From: Philipp Zabel @ 2016-01-05 9:31 UTC (permalink / raw) To: James Liao Cc: Matthias Brugger, Mike Turquette, Stephen Boyd, devicetree, Sascha Hauer, srv_heupstream, linux-kernel, Daniel Kurtz, linux-mediatek, Shunli Wang, linux-clk, linux-arm-kernel Am Dienstag, den 05.01.2016, 14:30 +0800 schrieb James Liao: > From: Shunli Wang <shunli.wang@mediatek.com> > > In infrasys and perifsys, there are many reset > control bits for kinds of modules. These bits are > used as actual reset controllers to be registered > into kernel's generic reset controller framework. > > Signed-off-by: Shunli Wang <shunli.wang@mediatek.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> regards Philipp ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2016-01-13 3:39 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-05 6:30 [PATCH v2 0/6] Add clock support for Mediatek MT2701 James Liao
[not found] ` <1451975422-31174-1-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2016-01-05 6:30 ` [PATCH v2 1/6] clk: mediatek: Refine the makefile to support multiple clock drivers James Liao
2016-01-05 6:30 ` [PATCH v2 3/6] clk: mediatek: Add dt-bindings for MT2701 clocks James Liao
2016-01-05 6:30 ` [PATCH v2 4/6] clk: mediatek: Add MT2701 clock support James Liao
[not found] ` <1451975422-31174-5-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2016-01-05 9:30 ` Philipp Zabel
2016-01-05 9:59 ` James Liao
2016-01-05 6:30 ` [PATCH v2 5/6] reset: mediatek: mt2701 reset controller dt-binding file James Liao
[not found] ` <1451975422-31174-6-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2016-01-05 9:31 ` Philipp Zabel
2016-01-05 10:00 ` James Liao
2016-01-05 6:30 ` [PATCH v2 2/6] dt-bindings: ARM: Mediatek: Document bindings for MT2701 James Liao
2016-01-06 15:08 ` Rob Herring
2016-01-13 3:39 ` James Liao
2016-01-05 6:30 ` [PATCH v2 6/6] reset: mediatek: mt2701 reset driver James Liao
2016-01-05 9:31 ` Philipp Zabel
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).