From: Wolfram Sang <wsa@the-dreams.de>
To: linux-i2c@vger.kernel.org
Cc: Wolfram Sang <wsa@the-dreams.de>,
linux-sh@vger.kernel.org, Magnus Damm <magnus.damm@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Pantelis Antoniou <pantelis.antoniou@konsulko.com>,
Jan Luebbe <jlu@pengutronix.de>
Subject: [RFC v2 0/4] i2c/of: switch I2C IP cores at runtime via OF_DYNAMIC
Date: Wed, 6 Jan 2016 14:51:21 +0100 [thread overview]
Message-ID: <1452088285-6427-1-git-send-email-wsa@the-dreams.de> (raw)
I know this is gonna be a controversial series, but we have a usecase for this :)
This series allows an I2C bus to switch between multiple masters, i.e. a
n-to-1-demuxer. This is not hot-switching because connected I2C slaves will be
re-instantiated. It is meant to select the best I2C core at runtime once the
task is known. Example: Prefer i2c-gpio over another I2C core because of HW
errata affecting your current runtime configuration.
It works by using OF_DYNAMIC and en-/disabling the i2c parent as needed. See
the binding docs for more details. Because this is largely using OF_DYNAMIC, I
decided to post the whole series to the dt list.
Changes since RFC v1:
* gracefully handle if i2c adapters are not present at runtime
(driver not loaded yet)
* added more documentation and examples
* properly put the i2c adapters after use
* respect PAGE_SIZE in sysfs_show
This has been tested on a Renesas Lager board switching between i2c-gpio and
two different IP cores (i2c-rcar and i2c-sh_mobile). The rebinding seems to be
working as expected. However, in practice, I couldn't use the HDMI i2c slaves
with another controller yet, because the rcar-du driver OOPSes when unbinding.
This seems unrelated to this series because it can also be triggered via
sysfs-unbind. soc-camera also had problems properly cleaning up on unbind, a
patch for this already has been sent. So, this series is for sure a good test
for the unbind path of drivers.
Let me know what you think.
Thanks,
Wolfram
Wolfram Sang (4):
of: make of_mutex public
dt-bindings: i2c: mux: demux-pinctrl: add bindings
i2c: mux: demux-pinctrl: add driver
ARM: shmobile: r8a7790: rework dts to use i2c demuxer
.../devicetree/bindings/i2c/i2c-demux-pinctrl.txt | 155 ++++++++++++
arch/arm/boot/dts/r8a7790-lager.dts | 141 +++++++----
drivers/i2c/muxes/Kconfig | 9 +
drivers/i2c/muxes/Makefile | 2 +
drivers/i2c/muxes/i2c-demux-pinctrl.c | 276 +++++++++++++++++++++
drivers/of/of_private.h | 1 -
include/linux/of.h | 2 +
7 files changed, 532 insertions(+), 54 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
create mode 100644 drivers/i2c/muxes/i2c-demux-pinctrl.c
--
2.1.4
next reply other threads:[~2016-01-06 13:51 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-06 13:51 Wolfram Sang [this message]
2016-01-06 13:51 ` [RFC v2 1/4] of: make of_mutex public Wolfram Sang
2016-01-06 14:26 ` Geert Uytterhoeven
2016-01-06 13:51 ` [RFC v2 2/4] dt-bindings: i2c: mux: demux-pinctrl: add bindings Wolfram Sang
2016-01-06 14:30 ` Geert Uytterhoeven
2016-01-13 12:52 ` Wolfram Sang
2016-01-13 14:07 ` Sergei Shtylyov
2016-01-07 16:56 ` Jan Lübbe
2016-01-13 13:02 ` Wolfram Sang
2016-01-11 2:52 ` Rob Herring
2016-01-11 8:01 ` Geert Uytterhoeven
2016-01-06 13:51 ` [RFC v2 3/4] i2c: mux: demux-pinctrl: add driver Wolfram Sang
[not found] ` <1452088285-6427-4-git-send-email-wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
2016-01-06 14:20 ` Geert Uytterhoeven
2016-01-13 12:55 ` Wolfram Sang
2016-01-13 16:16 ` Geert Uytterhoeven
2016-01-06 17:08 ` Rob Herring
2016-01-13 12:55 ` Wolfram Sang
2016-01-06 13:51 ` [RFC v2 4/4] ARM: shmobile: r8a7790: rework dts to use i2c demuxer Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452088285-6427-1-git-send-email-wsa@the-dreams.de \
--to=wsa@the-dreams.de \
--cc=devicetree@vger.kernel.org \
--cc=jlu@pengutronix.de \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=pantelis.antoniou@konsulko.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).