devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
To: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: Javier Martinez Canillas
	<javier-0uQlZySMnqxg9hUCZPvPmw@public.gmane.org>,
	Krzysztof Kozlowski
	<k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
	Nicolas Ferre
	<nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
Date: Tue, 12 Jan 2016 17:46:54 +0800	[thread overview]
Message-ID: <1452592015-22173-2-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1452592015-22173-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>

This patch adds support for the Active-semi ACT8945A PMIC.
It is a Multi Function Device with the following subdevices:
 - Regulator
 - Charger

It is interfaced to the host controller using I2C interface,
ACT8945A is a child device of the I2C.

Signed-off-by: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
---

Changes in v3: None
Changes in v2:
 - add more help information in Kconfig.
 - update the file header with short version license and author line.
 - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
 - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
 - use more explicit info to indicate the failure to add sub devices.
 - remove the unnecessary print out.
 - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").

 drivers/mfd/Kconfig          |   11 +++++
 drivers/mfd/Makefile         |    1 +
 drivers/mfd/act8945a.c       |  109 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/act8945a.h |   21 ++++++++
 4 files changed, 142 insertions(+)
 create mode 100644 drivers/mfd/act8945a.c
 create mode 100644 include/linux/mfd/act8945a.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9ca66de..34375a9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -18,6 +18,17 @@ config MFD_CS5535
 	  This is the core driver for CS5535/CS5536 MFD functions.  This is
           necessary for using the board's GPIO and MFGPT functionality.
 
+config MFD_ACT8945A
+	bool "Active-semi ACT8945A"
+	select MFD_CORE
+	select REGMAP_I2C
+	depends on I2C && OF
+	help
+	  Support for the ACT8945A PMIC from Active-semi. This device
+	  features three step-down DC/DC converters and four low-dropout
+	  linear regulators, along with a complete ActivePath battery
+	  charger.
+
 config MFD_AS3711
 	bool "AMS AS3711"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 0f230a6..2f1ca82 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x.o
 obj-$(CONFIG_MFD_88PM800)	+= 88pm800.o 88pm80x.o
 obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
+obj-$(CONFIG_MFD_ACT8945A)	+= act8945a.o
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
 obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c
new file mode 100644
index 0000000..7f8c50a
--- /dev/null
+++ b/drivers/mfd/act8945a.c
@@ -0,0 +1,109 @@
+/*
+ * MFD driver for Active-semi ACT8945a PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation.
+ *
+ * Author: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/act8945a.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell act8945a_devs[] = {
+	{
+		.name = "act8945a-pmic",
+		.of_compatible = "active-semi,act8945a-regulator",
+	},
+	{
+		.name = "act8945a-charger",
+		.of_compatible = "active-semi,act8945a-charger",
+	},
+};
+
+static const struct regmap_config act8945a_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int act8945a_i2c_probe(struct i2c_client *i2c,
+			      const struct i2c_device_id *id)
+{
+	struct act8945a_dev *act8945a;
+	int ret;
+
+	act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
+	if (!act8945a)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, act8945a);
+
+	act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config);
+	if (IS_ERR(act8945a->regmap)) {
+		ret = PTR_ERR(act8945a->regmap);
+		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs,
+			      ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to add sub devices\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int act8945a_i2c_remove(struct i2c_client *i2c)
+{
+	mfd_remove_devices(&i2c->dev);
+
+	return 0;
+}
+
+static const struct i2c_device_id act8945a_i2c_id[] = {
+	{ "act8945a", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
+
+static const struct of_device_id act8945a_of_match[] = {
+	{.compatible = "active-semi,act8945a", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, act8945a_of_match);
+
+static struct i2c_driver act8945a_i2c_driver = {
+	.driver = {
+		   .name = "act8945a",
+		   .of_match_table = of_match_ptr(act8945a_of_match),
+	},
+	.probe = act8945a_i2c_probe,
+	.remove = act8945a_i2c_remove,
+	.id_table = act8945a_i2c_id,
+};
+
+static int __init act8945a_i2c_init(void)
+{
+	return i2c_add_driver(&act8945a_i2c_driver);
+}
+subsys_initcall(act8945a_i2c_init);
+
+static void __exit act8945a_i2c_exit(void)
+{
+	i2c_del_driver(&act8945a_i2c_driver);
+}
+module_exit(act8945a_i2c_exit);
+
+MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/act8945a.h b/include/linux/mfd/act8945a.h
new file mode 100644
index 0000000..5f67009
--- /dev/null
+++ b/include/linux/mfd/act8945a.h
@@ -0,0 +1,21 @@
+/*
+ * MFD driver for Active-semi ACT8945a PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation.
+ *
+ * Author: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _LINUX_MFD_ACT8945A_H
+#define _LINUX_MFD_ACT8945A_H
+
+struct act8945a_dev {
+	struct regmap *regmap;
+};
+
+#endif
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2016-01-12  9:46 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-12  9:46 [PATCH v3 0/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver Wenyou Yang
     [not found] ` <1452592015-22173-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2016-01-12  9:46   ` Wenyou Yang [this message]
2016-01-13  1:46     ` [PATCH v3 1/2] " Krzysztof Kozlowski
2016-01-13  3:48       ` Yang, Wenyou
2016-01-12  9:46 ` [PATCH v3 2/2] mfd: add documentation for ACT8945A DT bindings Wenyou Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1452592015-22173-2-git-send-email-wenyou.yang@atmel.com \
    --to=wenyou.yang-aife0yeh4naavxtiumwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=javier-0uQlZySMnqxg9hUCZPvPmw@public.gmane.org \
    --cc=k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).