[PATCH v3 0/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

[PATCH v3 0/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

[Wenyou Yang]

This patch set adds support for the Active-semi ACT8945A PMIC
MFD driver. It is a Multi Function Device with the following
subdevices:
 - Regulator
 - Charger

It is interfaced to the host controller using I2C interface,
ACT8945A is a child device of the I2C.

Changes in v3:
 - fix the tabbing errors in Example.
 - use "pmic@5b" label, not "act8945a@5b" in Example.
 - collect Acked-by from Rob.

Changes in v2:
 - add more help information in Kconfig.
 - update the file header with short version license and author line.
 - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
 - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
 - use more explicit info to indicate the failure to add sub devices.
 - remove the unnecessary print out.
 - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
 - use more specific label in Example.
 - add pmic and charger nodes in Example.

Wenyou Yang (2):
  mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
  mfd: add documentation for ACT8945A DT bindings

 Documentation/devicetree/bindings/mfd/act8945a.txt |   82 +++++++++++++++
 drivers/mfd/Kconfig                                |   11 ++
 drivers/mfd/Makefile                               |    1 +
 drivers/mfd/act8945a.c                             |  109 ++++++++++++++++++++
 include/linux/mfd/act8945a.h                       |   21 ++++
 5 files changed, 224 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/act8945a.txt
 create mode 100644 drivers/mfd/act8945a.c
 create mode 100644 include/linux/mfd/act8945a.h

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

[Wenyou Yang]

This patch adds support for the Active-semi ACT8945A PMIC.
It is a Multi Function Device with the following subdevices:
 - Regulator
 - Charger

It is interfaced to the host controller using I2C interface,
ACT8945A is a child device of the I2C.

Signed-off-by: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
---

Changes in v3: None
Changes in v2:
 - add more help information in Kconfig.
 - update the file header with short version license and author line.
 - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
 - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
 - use more explicit info to indicate the failure to add sub devices.
 - remove the unnecessary print out.
 - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").

 drivers/mfd/Kconfig          |   11 +++++
 drivers/mfd/Makefile         |    1 +
 drivers/mfd/act8945a.c       |  109 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/act8945a.h |   21 ++++++++
 4 files changed, 142 insertions(+)
 create mode 100644 drivers/mfd/act8945a.c
 create mode 100644 include/linux/mfd/act8945a.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9ca66de..34375a9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -18,6 +18,17 @@ config MFD_CS5535
 	  This is the core driver for CS5535/CS5536 MFD functions.  This is
           necessary for using the board's GPIO and MFGPT functionality.
 
+config MFD_ACT8945A
+	bool "Active-semi ACT8945A"
+	select MFD_CORE
+	select REGMAP_I2C
+	depends on I2C && OF
+	help
+	  Support for the ACT8945A PMIC from Active-semi. This device
+	  features three step-down DC/DC converters and four low-dropout
+	  linear regulators, along with a complete ActivePath battery
+	  charger.
+
 config MFD_AS3711
 	bool "AMS AS3711"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 0f230a6..2f1ca82 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x.o
 obj-$(CONFIG_MFD_88PM800)	+= 88pm800.o 88pm80x.o
 obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
+obj-$(CONFIG_MFD_ACT8945A)	+= act8945a.o
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
 obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c
new file mode 100644
index 0000000..7f8c50a
--- /dev/null
+++ b/drivers/mfd/act8945a.c
@@ -0,0 +1,109 @@
+/*
+ * MFD driver for Active-semi ACT8945a PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation.
+ *
+ * Author: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/act8945a.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell act8945a_devs[] = {
+	{
+		.name = "act8945a-pmic",
+		.of_compatible = "active-semi,act8945a-regulator",
+	},
+	{
+		.name = "act8945a-charger",
+		.of_compatible = "active-semi,act8945a-charger",
+	},
+};
+
+static const struct regmap_config act8945a_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int act8945a_i2c_probe(struct i2c_client *i2c,
+			      const struct i2c_device_id *id)
+{
+	struct act8945a_dev *act8945a;
+	int ret;
+
+	act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
+	if (!act8945a)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, act8945a);
+
+	act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config);
+	if (IS_ERR(act8945a->regmap)) {
+		ret = PTR_ERR(act8945a->regmap);
+		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs,
+			      ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to add sub devices\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int act8945a_i2c_remove(struct i2c_client *i2c)
+{
+	mfd_remove_devices(&i2c->dev);
+
+	return 0;
+}
+
+static const struct i2c_device_id act8945a_i2c_id[] = {
+	{ "act8945a", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
+
+static const struct of_device_id act8945a_of_match[] = {
+	{.compatible = "active-semi,act8945a", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, act8945a_of_match);
+
+static struct i2c_driver act8945a_i2c_driver = {
+	.driver = {
+		   .name = "act8945a",
+		   .of_match_table = of_match_ptr(act8945a_of_match),
+	},
+	.probe = act8945a_i2c_probe,
+	.remove = act8945a_i2c_remove,
+	.id_table = act8945a_i2c_id,
+};
+
+static int __init act8945a_i2c_init(void)
+{
+	return i2c_add_driver(&act8945a_i2c_driver);
+}
+subsys_initcall(act8945a_i2c_init);
+
+static void __exit act8945a_i2c_exit(void)
+{
+	i2c_del_driver(&act8945a_i2c_driver);
+}
+module_exit(act8945a_i2c_exit);
+
+MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/act8945a.h b/include/linux/mfd/act8945a.h
new file mode 100644
index 0000000..5f67009
--- /dev/null
+++ b/include/linux/mfd/act8945a.h
@@ -0,0 +1,21 @@
+/*
+ * MFD driver for Active-semi ACT8945a PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation.
+ *
+ * Author: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _LINUX_MFD_ACT8945A_H
+#define _LINUX_MFD_ACT8945A_H
+
+struct act8945a_dev {
+	struct regmap *regmap;
+};
+
+#endif
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 2/2] mfd: add documentation for ACT8945A DT bindings

[Wenyou Yang]

The Active-semi ACT8945A PMIC is a Multi-Function Device, it has
two subdevices:
 - Regulator
 - Charger

This patch adds documentation for ACT8945A DT bindings.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Rob Herring <robh@kernel.org>
---

Changes in v3:
 - fix the tabbing errors in Example.
 - use "pmic@5b" label, not "act8945a@5b" in Example.
 - collect Acked-by from Rob.

Changes in v2:
 - use more specific label in Example.
 - add pmic and charger nodes in Example.

 Documentation/devicetree/bindings/mfd/act8945a.txt |   82 ++++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/act8945a.txt

diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
new file mode 100644
index 0000000..f645344
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/act8945a.txt
@@ -0,0 +1,82 @@
+Device-Tree bindings for Active-semi ACT8945A MFD driver
+
+Required properties:
+ - compatible: "active-semi,act8945a".
+ - reg: the I2C slave address for the ACT8945A chip
+
+The chip exposes two subdevices:
+ - a regulators: see ../regulator/act8945a-regulator.txt
+ - a charger: see ../power/act8945a-charger.txt
+
+Example:
+	pmic@5b {
+		compatible = "active-semi,act8945a";
+		reg = <0x5b>;
+		status = "okay";
+
+		pmic {
+			compatible = "active-semi,act8945a-regulator";
+			active-semi,vsel-high;
+
+			regulators {
+				vdd_1v35_reg: DCDC_REG1 {
+					regulator-name = "VDD_1V35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				vdd_1v2_reg: DCDC_REG2 {
+					regulator-name = "VDD_1V2";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+				};
+
+				vdd_3v3_reg: DCDC_REG3 {
+					regulator-name = "VDD_3V3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				vdd_fuse_reg: LDO_REG1 {
+					regulator-name = "VDD_FUSE";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					regulator-always-on;
+				};
+
+				vdd_3v3_lp_reg: LDO_REG2 {
+					regulator-name = "VDD_3V3_LP";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				vdd_led_reg: LDO_REG3 {
+					regulator-name = "VDD_LED";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				vdd_sdhc_1v8_reg: LDO_REG4 {
+					regulator-name = "VDD_SDHC_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		charger {
+			compatible = "active-semi,act8945a-charger";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_charger_chglev>;
+			active-semi,chglev-gpio = <&pioA 12 GPIO_ACTIVE_HIGH>;
+			active-semi,input_voltage_threshold = <6600>;
+			active-semi,precondition_timeout = <40>;
+			active-semi,total_timeout = <3>;
+		};
+	};
-- 
1.7.9.5

Re: [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

[Krzysztof Kozlowski]

On 12.01.2016 18:46, Wenyou Yang wrote:
> This patch adds support for the Active-semi ACT8945A PMIC.
> It is a Multi Function Device with the following subdevices:
>  - Regulator
>  - Charger
> 
> It is interfaced to the host controller using I2C interface,
> ACT8945A is a child device of the I2C.
> 
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> ---
> 
> Changes in v3: None
> Changes in v2:
>  - add more help information in Kconfig.
>  - update the file header with short version license and author line.
>  - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
>  - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
>  - use more explicit info to indicate the failure to add sub devices.
>  - remove the unnecessary print out.
>  - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
> 
>  drivers/mfd/Kconfig          |   11 +++++
>  drivers/mfd/Makefile         |    1 +
>  drivers/mfd/act8945a.c       |  109 ++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/act8945a.h |   21 ++++++++
>  4 files changed, 142 insertions(+)
>  create mode 100644 drivers/mfd/act8945a.c
>  create mode 100644 include/linux/mfd/act8945a.h
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9ca66de..34375a9 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -18,6 +18,17 @@ config MFD_CS5535
>  	  This is the core driver for CS5535/CS5536 MFD functions.  This is
>            necessary for using the board's GPIO and MFGPT functionality.
>  
> +config MFD_ACT8945A
> +	bool "Active-semi ACT8945A"
> +	select MFD_CORE
> +	select REGMAP_I2C
> +	depends on I2C && OF
> +	help
> +	  Support for the ACT8945A PMIC from Active-semi. This device
> +	  features three step-down DC/DC converters and four low-dropout
> +	  linear regulators, along with a complete ActivePath battery
> +	  charger.
> +
>  config MFD_AS3711
>  	bool "AMS AS3711"
>  	select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 0f230a6..2f1ca82 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -6,6 +6,7 @@
>  obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x.o
>  obj-$(CONFIG_MFD_88PM800)	+= 88pm800.o 88pm80x.o
>  obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
> +obj-$(CONFIG_MFD_ACT8945A)	+= act8945a.o
>  obj-$(CONFIG_MFD_SM501)		+= sm501.o
>  obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
>  obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
> diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c
> new file mode 100644
> index 0000000..7f8c50a
> --- /dev/null
> +++ b/drivers/mfd/act8945a.c
> @@ -0,0 +1,109 @@
> +/*
> + * MFD driver for Active-semi ACT8945a PMIC
> + *
> + * Copyright (C) 2015 Atmel Corporation.
> + *
> + * Author: Wenyou Yang <wenyou.yang@atmel.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under  the terms of the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/mfd/act8945a.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +static const struct mfd_cell act8945a_devs[] = {
> +	{
> +		.name = "act8945a-pmic",
> +		.of_compatible = "active-semi,act8945a-regulator",
> +	},
> +	{
> +		.name = "act8945a-charger",
> +		.of_compatible = "active-semi,act8945a-charger",
> +	},
> +};
> +
> +static const struct regmap_config act8945a_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +};
> +
> +static int act8945a_i2c_probe(struct i2c_client *i2c,
> +			      const struct i2c_device_id *id)
> +{
> +	struct act8945a_dev *act8945a;
> +	int ret;
> +
> +	act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
> +	if (!act8945a)
> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(i2c, act8945a);
> +
> +	act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config);
> +	if (IS_ERR(act8945a->regmap)) {
> +		ret = PTR_ERR(act8945a->regmap);
> +		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs,
> +			      ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
> +	if (ret) {
> +		dev_err(&i2c->dev, "Failed to add sub devices\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int act8945a_i2c_remove(struct i2c_client *i2c)
> +{
> +	mfd_remove_devices(&i2c->dev);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id act8945a_i2c_id[] = {
> +	{ "act8945a", 0 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
> +
> +static const struct of_device_id act8945a_of_match[] = {
> +	{.compatible = "active-semi,act8945a", },

Nit: a space before .compatible

Overall it looks good:

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

RE: [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

[Yang, Wenyou]

Hi Krzysztof,

> -----Original Message-----
> From: Krzysztof Kozlowski [mailto:k.kozlowski@samsung.com]
> Sent: 2016年1月13日 9:46
> To: Yang, Wenyou <Wenyou.Yang@atmel.com>; Lee Jones
> <lee.jones@linaro.org>; Rob Herring <robh+dt@kernel.org>; Pawel Moll
> <pawel.moll@arm.com>; Mark Rutland <mark.rutland@arm.com>; Ian Campbell
> <ijc+devicetree@hellion.org.uk>; Kumar Gala <galak@codeaurora.org>
> Cc: Javier Martinez Canillas <javier@dowhile0.org>; Ferre, Nicolas
> <Nicolas.FERRE@atmel.com>; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; devicetree@vger.kernel.org
> Subject: Re: [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC
> MFD driver
> 
> On 12.01.2016 18:46, Wenyou Yang wrote:
> > This patch adds support for the Active-semi ACT8945A PMIC.
> > It is a Multi Function Device with the following subdevices:
> >  - Regulator
> >  - Charger
> >
> > It is interfaced to the host controller using I2C interface, ACT8945A
> > is a child device of the I2C.
> >
> > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> > ---
> >
> > Changes in v3: None
> > Changes in v2:
> >  - add more help information in Kconfig.
> >  - update the file header with short version license and author line.
> >  - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
> >  - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
> >  - use more explicit info to indicate the failure to add sub devices.
> >  - remove the unnecessary print out.
> >  - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
> >
> >  drivers/mfd/Kconfig          |   11 +++++
> >  drivers/mfd/Makefile         |    1 +
> >  drivers/mfd/act8945a.c       |  109
> ++++++++++++++++++++++++++++++++++++++++++
> >  include/linux/mfd/act8945a.h |   21 ++++++++
> >  4 files changed, 142 insertions(+)
> >  create mode 100644 drivers/mfd/act8945a.c  create mode 100644
> > include/linux/mfd/act8945a.h
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index
> > 9ca66de..34375a9 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -18,6 +18,17 @@ config MFD_CS5535
> >  	  This is the core driver for CS5535/CS5536 MFD functions.  This is
> >            necessary for using the board's GPIO and MFGPT functionality.
> >
> > +config MFD_ACT8945A
> > +	bool "Active-semi ACT8945A"
> > +	select MFD_CORE
> > +	select REGMAP_I2C
> > +	depends on I2C && OF
> > +	help
> > +	  Support for the ACT8945A PMIC from Active-semi. This device
> > +	  features three step-down DC/DC converters and four low-dropout
> > +	  linear regulators, along with a complete ActivePath battery
> > +	  charger.
> > +
> >  config MFD_AS3711
> >  	bool "AMS AS3711"
> >  	select MFD_CORE
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index
> > 0f230a6..2f1ca82 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -6,6 +6,7 @@
> >  obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x.o
> >  obj-$(CONFIG_MFD_88PM800)	+= 88pm800.o 88pm80x.o
> >  obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
> > +obj-$(CONFIG_MFD_ACT8945A)	+= act8945a.o
> >  obj-$(CONFIG_MFD_SM501)		+= sm501.o
> >  obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
> >  obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
> > diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c new file
> > mode 100644 index 0000000..7f8c50a
> > --- /dev/null
> > +++ b/drivers/mfd/act8945a.c
> > @@ -0,0 +1,109 @@
> > +/*
> > + * MFD driver for Active-semi ACT8945a PMIC
> > + *
> > + * Copyright (C) 2015 Atmel Corporation.
> > + *
> > + * Author: Wenyou Yang <wenyou.yang@atmel.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify it
> > + * under  the terms of the GNU General  Public License as published
> > +by the
> > + * Free Software Foundation;  either version 2 of the License, or (at
> > +your
> > + * option) any later version.
> > + */
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/mfd/act8945a.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regmap.h>
> > +
> > +static const struct mfd_cell act8945a_devs[] = {
> > +	{
> > +		.name = "act8945a-pmic",
> > +		.of_compatible = "active-semi,act8945a-regulator",
> > +	},
> > +	{
> > +		.name = "act8945a-charger",
> > +		.of_compatible = "active-semi,act8945a-charger",
> > +	},
> > +};
> > +
> > +static const struct regmap_config act8945a_regmap_config = {
> > +	.reg_bits = 8,
> > +	.val_bits = 8,
> > +};
> > +
> > +static int act8945a_i2c_probe(struct i2c_client *i2c,
> > +			      const struct i2c_device_id *id) {
> > +	struct act8945a_dev *act8945a;
> > +	int ret;
> > +
> > +	act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
> > +	if (!act8945a)
> > +		return -ENOMEM;
> > +
> > +	i2c_set_clientdata(i2c, act8945a);
> > +
> > +	act8945a->regmap = devm_regmap_init_i2c(i2c,
> &act8945a_regmap_config);
> > +	if (IS_ERR(act8945a->regmap)) {
> > +		ret = PTR_ERR(act8945a->regmap);
> > +		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
> act8945a_devs,
> > +			      ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
> > +	if (ret) {
> > +		dev_err(&i2c->dev, "Failed to add sub devices\n");
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int act8945a_i2c_remove(struct i2c_client *i2c) {
> > +	mfd_remove_devices(&i2c->dev);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct i2c_device_id act8945a_i2c_id[] = {
> > +	{ "act8945a", 0 },
> > +	{}
> > +};
> > +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
> > +
> > +static const struct of_device_id act8945a_of_match[] = {
> > +	{.compatible = "active-semi,act8945a", },
> 
> Nit: a space before .compatible
> 
> Overall it looks good:
> 
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Thank you for your Reviewed-by.

> 
> Best regards,
> Krzysztof


Best Regards,
Wenyou Yang