From: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Yisen Zhuang
<Yisen.zhuang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>,
Kejian Yan <yankejian-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>,
davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
huangdaode-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
liguozhu-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
fengguang.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
salil.mehta-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
lisheng011-hv44wF8Li93QT0dZR+AlfA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v2 next-next] net: hns: enet specifies a reference to dsaf
Date: Thu, 14 Jan 2016 11:43:55 +0200 [thread overview]
Message-ID: <1452764635.2521.28.camel@linux.intel.com> (raw)
In-Reply-To: <56970F48.9060504-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
On Thu, 2016-01-14 at 11:00 +0800, Yisen Zhuang wrote:
>
> 在 2016/1/13 11:14, Kejian Yan 写道:
> > This patch replace the assoication between dsaf and enet from
> > string
> > matching to object reference. It requires the DTS to be updated
> > within
> > BIOS. Thanks god it can be done for all released boards.
> >
>
> Hi kejian,
>
> This patch is fine to me.
There are few thing below.
>
> > --- a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
> > +++ b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
> > @@ -847,6 +847,7 @@ static struct hnae_ae_ops hns_dsaf_ops = {
> > int hns_dsaf_ae_init(struct dsaf_device *dsaf_dev)
> > {
> > struct hnae_ae_dev *ae_dev = &dsaf_dev->ae_dev;
> > + static atomic_t id = ATOMIC_INIT(-1);
> >
> > switch (dsaf_dev->dsaf_ver) {
> > case AE_VERSION_1:
> > @@ -858,6 +859,9 @@ int hns_dsaf_ae_init(struct dsaf_device
> > *dsaf_dev)
> > default:
> > break;
> > }
> > +
> > + snprintf(ae_dev->name, AE_NAME_SIZE, "%s%d",
> > DSAF_DEVICE_NAME,
> > + (int)atomic_inc_return(&id));
If you bind/unbind device enough times you may get an overflow and end
up with name of existing device (if you have 1+ of them in the system).
To avoid such situation better to use IDA/IDR framework.
> >
> > --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
> > +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
> > @@ -1802,7 +1802,7 @@ static int hns_nic_try_get_ae(struct
> > net_device *ndev)
> > int ret;
> >
> > h = hnae_get_handle(&priv->netdev->dev,
> > - priv->ae_name, priv->port_id, NULL);
> > + priv->ae_node, priv->port_id, NULL);
> > if (IS_ERR_OR_NULL(h)) {
> > ret = PTR_ERR(h);
> > dev_dbg(priv->dev, "has not handle, register
> > notifier!\n");
> > @@ -1880,9 +1880,12 @@ static int hns_nic_dev_probe(struct
> > platform_device *pdev)
> > else
> > priv->enet_ver = AE_VERSION_2;
> >
> > - ret = of_property_read_string(node, "ae-name", &priv-
> > >ae_name);
> > - if (ret)
> > - goto out_read_string_fail;
(1)
> > + priv->ae_node = (void *)of_parse_phandle(node, "ae-
> > handle", 0);
> > + if (IS_ERR_OR_NULL(priv->ae_node)) {
> > + ret = PTR_ERR(priv->ae_node);
> > + dev_err(dev, "not find ae-handle\n");
> > + goto out_read_handle_fai;
(2)
> > + }
> >
> > ret = of_property_read_u32(node, "port-id", &priv-
> > >port_id);
> > if (ret)
> > @@ -1945,6 +1948,8 @@ static int hns_nic_dev_probe(struct
> > platform_device *pdev)
> >
> > out_notify_fail:
> > (void)cancel_work_sync(&priv->service_task);
> > +out_read_handle_fai:
> > +
Redundant line
> > out_read_string_fail:
Leftover? (see (1) and (2) )
--
Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Intel Finland Oy
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-01-14 9:43 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-13 3:14 [PATCH v2 next-next] net: hns: enet specifies a reference to dsaf Kejian Yan
2016-01-14 3:00 ` Yisen Zhuang
[not found] ` <56970F48.9060504-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2016-01-14 9:43 ` Andy Shevchenko [this message]
[not found] ` <1452764635.2521.28.camel-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2016-01-18 11:35 ` Yankejian (Hackim Yim)
2016-01-20 6:49 ` Yankejian (Hackim Yim)
[not found] ` <569F2DEC.9040209-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2016-01-20 9:36 ` Andy Shevchenko
2016-01-20 11:10 ` Yankejian (Hackim Yim)
[not found] ` <1452654880-28980-1-git-send-email-yankejian-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2016-01-15 2:28 ` Rob Herring
-- strict thread matches above, loose matches on Subject: below --
2016-01-13 3:01 Kejian Yan
2016-01-13 2:52 ` Yankejian (Hackim Yim)
2016-01-13 2:54 ` David Miller
2016-01-13 3:00 ` Yankejian (Hackim Yim)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452764635.2521.28.camel@linux.intel.com \
--to=andriy.shevchenko-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=Yisen.zhuang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fengguang.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=huangdaode-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=liguozhu-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=lisheng011-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=salil.mehta-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
--cc=yankejian-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).