devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: kernel@martin.sperl.org
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Lee Jones <lee@kernel.org>, Eric Anholt <eric@anholt.net>,
	Remi Pommarel <repk@triplefau.lt>,
	linux-clk@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Cc: Martin Sperl <kernel@martin.sperl.org>
Subject: [PATCH V4 5/7] clk: bcm2835: add missing 22 HW-clocks.
Date: Fri, 15 Jan 2016 14:21:04 +0000	[thread overview]
Message-ID: <1452867667-2447-6-git-send-email-kernel@martin.sperl.org> (raw)
In-Reply-To: <1452867667-2447-1-git-send-email-kernel@martin.sperl.org>

From: Martin Sperl <kernel@martin.sperl.org>

There were 22 HW clocks missing from the clock driver.

These have been included and int_bits and frac_bits
have been set correctly based on information extracted
from the broadcom videocore headers
(http://www.broadcom.com/docs/support/videocore/Brcm_Android_ICS_Graphics_Stack.tar.gz)

For an extracted view of the registers please see:
https://github.com/msperl/rpi-registers/blob/master/md/Region_CM.md

bcm2835_clock_per_parents has been assigned as the parent
clock for all new clocks, but this may not be correct
in all cases - documentation on this is not publicly
available, so some modifications may be needed in the
future.

There are a 3 more clocks that possibly could get implemented
as gates instead of clocks:


There are comments to indicate those.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
---
 drivers/clk/bcm/clk-bcm2835.c       |  260 ++++++++++++++++++++++++++++++++++-
 include/dt-bindings/clock/bcm2835.h |   22 +++
 2 files changed, 276 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 8bc0a76..1640288 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -92,8 +92,18 @@
 #define CM_PCMDIV		0x09c
 #define CM_PWMCTL		0x0a0
 #define CM_PWMDIV		0x0a4
+#define CM_SLIMCTL		0x0a8
+#define CM_SLIMDIV		0x0ac
 #define CM_SMICTL		0x0b0
 #define CM_SMIDIV		0x0b4
+#define CM_TCNTCTL		0x0c0
+#define CM_TCNTDIV		0x0c4
+#define CM_TECCTL		0x0c8
+#define CM_TECDIV		0x0cc
+#define CM_TD0CTL		0x0d0
+#define CM_TD0DIV		0x0d4
+#define CM_TD1CTL		0x0d8
+#define CM_TD1DIV		0x0dc
 #define CM_TSENSCTL		0x0e0
 #define CM_TSENSDIV		0x0e4
 #define CM_TIMERCTL		0x0e8
@@ -107,6 +117,9 @@
 #define CM_SDCCTL		0x1a8
 #define CM_SDCDIV		0x1ac
 #define CM_ARMCTL		0x1b0
+#define CM_ARMDIV		0x1b4
+#define CM_AVEOCTL		0x1b8
+#define CM_AVEODIV		0x1bc
 #define CM_EMMCCTL		0x1c0
 #define CM_EMMCDIV		0x1c4

@@ -829,6 +842,219 @@ static const struct bcm2835_clock_data bcm2835_clock_pcm_data = {
 	.frac_bits = 12,
 };

+static const struct bcm2835_clock_data bcm2835_clock_aveo_data = {
+	.name = "aveo",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_AVEOCTL,
+	.div_reg = CM_AVEODIV,
+	.int_bits = 4,
+	.frac_bits = 12,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_cam0_data = {
+	.name = "cam0",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_CAM0CTL,
+	.div_reg = CM_CAM0DIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_cam1_data = {
+	.name = "cam1",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_CAM1CTL,
+	.div_reg = CM_CAM1DIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_ccp2_data = {
+	/* this is possibly a gate */
+	.name = "ccp2",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_CCP2CTL,
+	.div_reg = CM_CCP2DIV,
+	.int_bits = 1,
+	.frac_bits = 0,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_dft_data = {
+	.name = "dft",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_DFTCTL,
+	.div_reg = CM_DFTDIV,
+	.int_bits = 5,
+	.frac_bits = 0,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_dpi_data = {
+	.name = "dpi",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_DPICTL,
+	.div_reg = CM_DPIDIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_dsi0e_data = {
+	.name = "dsi0e",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_DSI0ECTL,
+	.div_reg = CM_DSI0EDIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_dsi0p_data = {
+	/* this is possibly a gate */
+	.name = "dsi0p",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_DSI0PCTL,
+	.div_reg = CM_DSI0PDIV,
+	.int_bits = 1,
+	.frac_bits = 0,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_dsi1e_data = {
+	.name = "dsi1e",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_DSI1ECTL,
+	.div_reg = CM_DSI1EDIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_dsi1p_data = {
+	/* this is possibly a gate */
+	.name = "dsi1p",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_DSI1PCTL,
+	.div_reg = CM_DSI1PDIV,
+	.int_bits = 1,
+	.frac_bits = 0,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_gnric_data = {
+	.name = "gnric",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_GNRICCTL,
+	.div_reg = CM_GNRICDIV,
+	.int_bits = 12,
+	.frac_bits = 12,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_gp0_data = {
+	.name = "gp0",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_GP0CTL,
+	.div_reg = CM_GP0DIV,
+	.int_bits = 12,
+	.frac_bits = 12,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_gp1_data = {
+	.name = "gp1",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_GP1CTL,
+	.div_reg = CM_GP1DIV,
+	.int_bits = 12,
+	.frac_bits = 12,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_gp2_data = {
+	.name = "gp2",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_GP2CTL,
+	.div_reg = CM_GP2DIV,
+	.int_bits = 12,
+	.frac_bits = 12,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_peria_data = {
+	.name = "peria",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_PERIACTL,
+	.div_reg = CM_PERIADIV,
+	.int_bits = 12,
+	.frac_bits = 12,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_pulse_data = {
+	.name = "pulse",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_PULSECTL,
+	.div_reg = CM_PULSEDIV,
+	.int_bits = 12,
+	.frac_bits = 0,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_slim_data = {
+	.name = "slim",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_SLIMCTL,
+	.div_reg = CM_SLIMDIV,
+	.int_bits = 12,
+	.frac_bits = 12,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_smi_data = {
+	.name = "smi",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_SMICTL,
+	.div_reg = CM_SMIDIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_td0_data = {
+	.name = "td0",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_TD0CTL,
+	.div_reg = CM_TD0DIV,
+	.int_bits = 12,
+	.frac_bits = 12,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_td1_data = {
+	.name = "td1",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_TD1CTL,
+	.div_reg = CM_TD1DIV,
+	.int_bits = 12,
+	.frac_bits = 12,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_tec_data = {
+	.name = "tec",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_TECCTL,
+	.div_reg = CM_TECDIV,
+	.int_bits = 6,
+	.frac_bits = 0,
+};
+
 struct bcm2835_gate_data {
 	const char *name;
 	const char *parent;
@@ -836,18 +1062,18 @@ struct bcm2835_gate_data {
 	u32 ctl_reg;
 };

-/*
- * CM_PERIICTL (and CM_PERIACTL, CM_SYSCTL and CM_VPUCTL if
- * you have the debug bit set in the power manager, which we
- * don't bother exposing) are individual gates off of the
- * non-stop vpu clock.
- */
 static const struct bcm2835_gate_data bcm2835_clock_peri_image_data = {
 	.name = "peri_image",
 	.parent = "vpu",
 	.ctl_reg = CM_PERIICTL,
 };

+static const struct bcm2835_gate_data bcm2835_clock_sys_data = {
+	.name = "sys",
+	.parent = "vpu",
+	.ctl_reg = CM_SYSCTL,
+};
+
 struct bcm2835_pll {
 	struct clk_hw hw;
 	struct bcm2835_cprman *cprman;
@@ -1591,9 +1817,31 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
 	[BCM2835_CLOCK_EMMC]	= REGISTER_CLK(&bcm2835_clock_emmc_data),
 	[BCM2835_CLOCK_PWM]	= REGISTER_CLK(&bcm2835_clock_pwm_data),
 	[BCM2835_CLOCK_PCM]	= REGISTER_CLK(&bcm2835_clock_pcm_data),
+	[BCM2835_CLOCK_AVEO]	= REGISTER_CLK(&bcm2835_clock_aveo_data),
+	[BCM2835_CLOCK_CAM0]	= REGISTER_CLK(&bcm2835_clock_cam0_data),
+	[BCM2835_CLOCK_CAM1]	= REGISTER_CLK(&bcm2835_clock_cam1_data),
+	[BCM2835_CLOCK_CCP2]	= REGISTER_CLK(&bcm2835_clock_ccp2_data),
+	[BCM2835_CLOCK_DFT]	= REGISTER_CLK(&bcm2835_clock_dft_data),
+	[BCM2835_CLOCK_DPI]	= REGISTER_CLK(&bcm2835_clock_dpi_data),
+	[BCM2835_CLOCK_DSI0E]	= REGISTER_CLK(&bcm2835_clock_dsi0e_data),
+	[BCM2835_CLOCK_DSI0P]	= REGISTER_CLK(&bcm2835_clock_dsi0p_data),
+	[BCM2835_CLOCK_DSI1E]	= REGISTER_CLK(&bcm2835_clock_dsi1e_data),
+	[BCM2835_CLOCK_DSI1P]	= REGISTER_CLK(&bcm2835_clock_dsi1p_data),
+	[BCM2835_CLOCK_GNRIC]	= REGISTER_CLK(&bcm2835_clock_gnric_data),
+	[BCM2835_CLOCK_GP0]	= REGISTER_CLK(&bcm2835_clock_gp0_data),
+	[BCM2835_CLOCK_GP1]	= REGISTER_CLK(&bcm2835_clock_gp1_data),
+	[BCM2835_CLOCK_GP2]	= REGISTER_CLK(&bcm2835_clock_gp2_data),
+	[BCM2835_CLOCK_PERIA]	= REGISTER_CLK(&bcm2835_clock_peria_data),
+	[BCM2835_CLOCK_PULSE]	= REGISTER_CLK(&bcm2835_clock_pulse_data),
+	[BCM2835_CLOCK_SLIM]	= REGISTER_CLK(&bcm2835_clock_slim_data),
+	[BCM2835_CLOCK_SMI]	= REGISTER_CLK(&bcm2835_clock_smi_data),
+	[BCM2835_CLOCK_TD0]	= REGISTER_CLK(&bcm2835_clock_td0_data),
+	[BCM2835_CLOCK_TD1]	= REGISTER_CLK(&bcm2835_clock_td1_data),
+	[BCM2835_CLOCK_TEC]	= REGISTER_CLK(&bcm2835_clock_tec_data),
 	/* the gates */
 	[BCM2835_CLOCK_PERI_IMAGE] = REGISTER_GATE(
 		&bcm2835_clock_peri_image_data),
+	[BCM2835_CLOCK_SYS]	= REGISTER_GATE(&bcm2835_clock_sys_data),
 };

 static int bcm2835_clk_probe(struct platform_device *pdev)
diff --git a/include/dt-bindings/clock/bcm2835.h b/include/dt-bindings/clock/bcm2835.h
index 9a7b4a5..d29f181 100644
--- a/include/dt-bindings/clock/bcm2835.h
+++ b/include/dt-bindings/clock/bcm2835.h
@@ -45,3 +45,25 @@
 #define BCM2835_CLOCK_PERI_IMAGE	29
 #define BCM2835_CLOCK_PWM		30
 #define BCM2835_CLOCK_PCM		31
+#define BCM2835_CLOCK_AVEO		32
+#define BCM2835_CLOCK_CAM0		33
+#define BCM2835_CLOCK_CAM1		34
+#define BCM2835_CLOCK_CCP2		35
+#define BCM2835_CLOCK_DFT		36
+#define BCM2835_CLOCK_DPI		37
+#define BCM2835_CLOCK_DSI0E		38
+#define BCM2835_CLOCK_DSI0P		39
+#define BCM2835_CLOCK_DSI1E		40
+#define BCM2835_CLOCK_DSI1P		41
+#define BCM2835_CLOCK_GNRIC		42
+#define BCM2835_CLOCK_GP0		43
+#define BCM2835_CLOCK_GP1		44
+#define BCM2835_CLOCK_GP2		45
+#define BCM2835_CLOCK_PERIA		46
+#define BCM2835_CLOCK_PULSE		47
+#define BCM2835_CLOCK_SLIM		48
+#define BCM2835_CLOCK_SMI		49
+#define BCM2835_CLOCK_SYS		50
+#define BCM2835_CLOCK_TD0		51
+#define BCM2835_CLOCK_TD1		52
+#define BCM2835_CLOCK_TEC		53
--
1.7.10.4


  parent reply	other threads:[~2016-01-15 14:21 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-15 14:20 [PATCH V4 0/7] clk: bcm2835: add clocks and add MASH support kernel
2016-01-15 14:21 ` [PATCH V4 1/7] clk: bcm2835: the minimum clock divider is 2 kernel
2016-02-01 23:15   ` Eric Anholt
2016-02-02  1:52     ` Eric Anholt
2016-02-08 10:39       ` Martin Sperl
2016-02-08 10:28     ` Martin Sperl
2016-02-13  0:28       ` Eric Anholt
2016-01-15 14:21 ` [PATCH V4 2/7] clk: bcm2835: clamp clock divider to highest integer only kernel
2016-02-01 23:19   ` Eric Anholt
2016-02-08 12:20     ` Martin Sperl
2016-01-15 14:21 ` [PATCH V4 3/7] clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver kernel
     [not found] ` <1452867667-2447-1-git-send-email-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
2016-01-15 14:21   ` [PATCH V4 4/7] clk: bcm2835: enable management of PCM clock kernel-TqfNSX0MhmxHKSADF0wUEw
2016-01-15 14:21 ` kernel [this message]
2016-02-02  1:51   ` [PATCH V4 5/7] clk: bcm2835: add missing 22 HW-clocks Eric Anholt
2016-02-08 11:12     ` Martin Sperl
2016-02-17 18:25       ` Martin Sperl
2016-02-17 20:01         ` Stefan Wahren
2016-01-15 14:21 ` [PATCH V4 6/7] clk: bcm2835: enable fractional and mash support kernel
2016-01-15 14:21 ` [PATCH V4 7/7] clk: bcm2835: apply limits on dividers to MASH mode kernel
2016-01-16  9:40 ` [PATCH V4 0/7] clk: bcm2835: add clocks and add MASH support Martin Sperl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1452867667-2447-6-git-send-email-kernel@martin.sperl.org \
    --to=kernel@martin.sperl.org \
    --cc=devicetree@vger.kernel.org \
    --cc=eric@anholt.net \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=repk@triplefau.lt \
    --cc=sboyd@codeaurora.org \
    --cc=swarren@wwwdotorg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).