From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jisheng Zhang Subject: [PATCH v3 4/4] net: mvneta: update clocks property and document additional clock-names Date: Wed, 20 Jan 2016 19:27:25 +0800 Message-ID: <1453289245-2061-5-git-send-email-jszhang@marvell.com> References: <1453289245-2061-1-git-send-email-jszhang@marvell.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1453289245-2061-1-git-send-email-jszhang@marvell.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: thomas.petazzoni@free-electrons.com, davem@davemloft.net, mw@semihalf.com, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, sebastian.hesselbarth@gmail.com Cc: Jisheng Zhang , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org List-Id: devicetree@vger.kernel.org Signed-off-by: Jisheng Zhang --- Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index aeea50c..d0cb869 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -6,12 +6,17 @@ Required properties: - interrupts: interrupt for the device - phy: See ethernet.txt file in the same directory. - phy-mode: See ethernet.txt file in the same directory -- clocks: a pointer to the reference clock for this device. +- clocks: List of clocks for this device. At least one clock is + mandatory for the core clock. If several clocks are given, then the + clock-names property must be used to identify them. Optional properties: - tx-csum-limit: maximum mtu supported by port that allow TX checksum. Value is presented in bytes. If not used, by default 1600B is set for "marvell,armada-370-neta" and 9800B for others. +- clock-names: List of names corresponding to clocks property; shall be + "core" for core clock and "bus" for the optional bus clock. + Example: -- 2.7.0.rc3