[RFC v2 3/7] MIPS: dts: qca: introduce AR9331 devicetree

[RFC v2 3/7] MIPS: dts: qca: introduce AR9331 devicetree

[Antony Pavlov]

This patch introduces devicetree for Atheros AR9331 SoC (AKA Hornet).
The AR9331 chip is a Wi-Fi System-On-Chip (WiSOC),
typically used in very cheap Access Points and Routers.

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Cc: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/mips/boot/dts/qca/ar9331.dtsi | 123 +++++++++++++++++++++++++++++++++++++
 1 file changed, 123 insertions(+)

diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
new file mode 100644
index 0000000..fae7e6d
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -0,0 +1,123 @@
+#include <dt-bindings/clock/ar933x-clk.h>
+
+/ {
+	compatible = "qca,ar9331";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips24Kc";
+			reg = <0>;
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "qca,ar7100-cpu-intc";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		qca,ddr-wb-channel-interrupts = <2>, <3>;
+		qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		ranges;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+
+		apb {
+			compatible = "simple-bus";
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			interrupt-parent = <&miscintc>;
+
+			ddr_ctrl: memory-controller@18000000 {
+				compatible = "qca,ar7240-ddr-controller";
+				reg = <0x18000000 0x100>;
+
+				#qca,ddr-wb-channel-cells = <1>;
+			};
+
+			uart: uart@18020000 {
+				compatible = "qca,ar9330-uart";
+				reg = <0x18020000 0x14>;
+
+				interrupts = <3>;
+
+				clocks = <&pll AR933X_CLK_UART>;
+				clock-names = "uart";
+
+				status = "disabled";
+			};
+
+			gpio: gpio@18040000 {
+				compatible = "qca,ar7100-gpio";
+				reg = <0x18040000 0x34>;
+				interrupts = <2>;
+
+				ngpios = <30>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				status = "disabled";
+			};
+
+			ref: oscillator {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+			};
+
+			pll: pll-controller@18050000 {
+				compatible = "qca,ar9330-pll";
+				reg = <0x18050000 0x20>;
+
+				clocks = <&ref>;
+				clock-names = "ref";
+
+				#clock-cells = <1>;
+			};
+
+			miscintc: interrupt-controller@18060010 {
+				compatible = "qca,ar7240-misc-intc";
+				reg = <0x18060010 0x4>;
+
+				interrupt-parent = <&cpuintc>;
+				interrupts = <6>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			spi: spi@1f000000 {
+				compatible = "qca,ar7100-spi";
+				reg = <0x1f000000 0x10>;
+
+				clocks = <&pll AR933X_CLK_AHB>;
+				clock-names = "ahb";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+	};
+};
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RFC v2 4/7] MIPS: ath79: add initial support for TP-LINK MR3020

[Antony Pavlov]

Currently only the UART, SPI-flash and LEDs are supported.

Links:

  * http://www.tp-link.com/en/products/details/?model=TL-MR3020
  * http://wiki.openwrt.org/toh/tp-link/tl-mr3020
  * https://wikidevi.com/wiki/TP-LINK_TL-MR3020

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Cc: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/mips/ath79/Kconfig              |  5 +++
 arch/mips/boot/dts/qca/Makefile      |  1 +
 arch/mips/boot/dts/qca/tl_mr3020.dts | 72 ++++++++++++++++++++++++++++++++++++
 3 files changed, 78 insertions(+)

diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index 13c04cf..4fd53ae 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -77,6 +77,11 @@ choice
 	help
 	  Select a devicetree that should be built into the kernel.
 
+	config DTB_TL_MR3020
+		bool "TL-MR3020"
+		select BUILTIN_DTB
+		select SOC_AR933X
+
 	config DTB_TL_WR1043ND_V1
 		bool "TL-WR1043ND Version 1"
 		select BUILTIN_DTB
diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
index 2d61455d..ae47e35 100644
--- a/arch/mips/boot/dts/qca/Makefile
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -2,6 +2,7 @@
 dtb-$(CONFIG_ATH79)			+= ar9132_tl_wr1043nd_v1.dtb
 
 # Select a DTB to build in the kernel
+obj-$(CONFIG_DTB_TL_MR3020)		+= tl_mr3020.dtb.o
 obj-$(CONFIG_DTB_TL_WR1043ND_V1)	+= ar9132_tl_wr1043nd_v1.dtb.o
 
 # Force kbuild to make empty built-in.o if necessary
diff --git a/arch/mips/boot/dts/qca/tl_mr3020.dts b/arch/mips/boot/dts/qca/tl_mr3020.dts
new file mode 100644
index 0000000..ca00836
--- /dev/null
+++ b/arch/mips/boot/dts/qca/tl_mr3020.dts
@@ -0,0 +1,72 @@
+/dts-v1/;
+
+#include "ar9331.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "TP-Link TL-MR3020";
+	compatible = "tplink,tl-mr3020";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			label = "tp-link:green:wlan";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		lan {
+			label = "tp-link:green:lan";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		wps {
+			label = "tp-link:green:wps";
+			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3g {
+			label = "tp-link:green:3g";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Spansion S25FL032PIF SPI flash */
+	spiflash: s25sl032p@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25sl032p", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RFC v2 5/7] devicetree: add Dragino vendor id

[Antony Pavlov]

Please see http://www.dragino.com/about/about.html for details.

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 55df1d4..64f35c9 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -67,6 +67,7 @@ digilent	Diglent, Inc.
 dlg	Dialog Semiconductor
 dlink	D-Link Corporation
 dmo	Data Modul AG
+dragino	Dragino Technology Co., Limited
 ea	Embedded Artists AB
 ebv	EBV Elektronik
 edt	Emerging Display Technologies
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RFC v2 6/7] MIPS: ath79: add initial support for Dragino MS14 (Dragino 2)

[Antony Pavlov]

Currently only the UART, SPI-flash and LEDs are supported.

Links:

    * http://www.dragino.com/products/mother-board/item/71-ms14-p.html
    * https://wiki.openwrt.org/toh/dragino/ms14

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Cc: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/mips/ath79/Kconfig                 |  5 +++
 arch/mips/boot/dts/qca/Makefile         |  1 +
 arch/mips/boot/dts/qca/dragino_ms14.dts | 73 +++++++++++++++++++++++++++++++++
 3 files changed, 79 insertions(+)

diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index 4fd53ae..2797581 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -77,6 +77,11 @@ choice
 	help
 	  Select a devicetree that should be built into the kernel.
 
+	config DTB_DRAGINO_MS14
+		bool "Dragino MS14 (Dragino 2)"
+		select BUILTIN_DTB
+		select SOC_AR933X
+
 	config DTB_TL_MR3020
 		bool "TL-MR3020"
 		select BUILTIN_DTB
diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
index ae47e35..dfba4d2 100644
--- a/arch/mips/boot/dts/qca/Makefile
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -2,6 +2,7 @@
 dtb-$(CONFIG_ATH79)			+= ar9132_tl_wr1043nd_v1.dtb
 
 # Select a DTB to build in the kernel
+obj-$(CONFIG_DTB_DRAGINO_MS14)		+= dragino_ms14.dtb.o
 obj-$(CONFIG_DTB_TL_MR3020)		+= tl_mr3020.dtb.o
 obj-$(CONFIG_DTB_TL_WR1043ND_V1)	+= ar9132_tl_wr1043nd_v1.dtb.o
 
diff --git a/arch/mips/boot/dts/qca/dragino_ms14.dts b/arch/mips/boot/dts/qca/dragino_ms14.dts
new file mode 100644
index 0000000..ec4dc64
--- /dev/null
+++ b/arch/mips/boot/dts/qca/dragino_ms14.dts
@@ -0,0 +1,73 @@
+/dts-v1/;
+
+#include "ar9331.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Dragino MS14 (Dragino 2)";
+	compatible = "dragino,ms14";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			label = "dragino2:red:wlan";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		lan {
+			label = "dragino2:red:lan";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		wan {
+			label = "dragino2:red:wan";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		system {
+			label = "dragino2:red:system";
+			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q128BVFG SPI flash */
+	spiflash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RFC v2 5/7] devicetree: add Dragino vendor id

[Rob Herring]

On Fri, Jan 22, 2016 at 01:34:22AM +0300, Antony Pavlov wrote:
> Please see http://www.dragino.com/about/about.html for details.
> 
> Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html