devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: Antony Pavlov
	<antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Alban Bedel <albeu-GANU6spQydw@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [RFC v3 03/14] MIPS: dts: qca: ar9132: use dt-bindings/clock/ath79-clk.h macros
Date: Sat, 23 Jan 2016 23:17:20 +0300	[thread overview]
Message-ID: <1453580251-2341-4-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1453580251-2341-1-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

The old ar9132 clk implementation (see arch/mips/ath79/clock.c)
have had only 3 devicetree clks (cpu, ddr, ahb). Two additional
clocks (wdt and uart) have realized as aliases for ahb clock.
In the old ar9132 clk implementation the wdt and uart clocks
were inaccessible via devicetree so index "2" used for reference
to ahb clock instead, e.g.

    clocks = <&pll 2>;

In the new ar9132 clk implementation (see drivers/clk/clk-ath79.c)
the wdt and uart clks are accessible via devicetree
so appropriate ATH79_CLK_WDT and ATH79_CLK_UART are used in ar9132.dtsi.

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/mips/boot/dts/qca/ar9132.dtsi | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index 13d0439..4a537ea 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/clock/ath79-clk.h>
+
 / {
 	compatible = "qca,ar9132";
 
@@ -57,7 +59,7 @@
 				reg = <0x18020000 0x20>;
 				interrupts = <3>;
 
-				clocks = <&pll 2>;
+				clocks = <&pll ATH79_CLK_UART>;
 				clock-names = "uart";
 
 				reg-io-width = <4>;
@@ -100,7 +102,7 @@
 
 				interrupts = <4>;
 
-				clocks = <&pll 2>;
+				clocks = <&pll ATH79_CLK_WDT>;
 				clock-names = "wdt";
 			};
 
@@ -129,7 +131,7 @@
 			compatible = "qca,ar9132-spi", "qca,ar7100-spi";
 			reg = <0x1f000000 0x10>;
 
-			clocks = <&pll 2>;
+			clocks = <&pll ATH79_CLK_AHB>;
 			clock-names = "ahb";
 
 			status = "disabled";
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2016-01-23 20:17 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1453580251-2341-1-git-send-email-antonynpavlov@gmail.com>
2016-01-23 20:17 ` [RFC v3 01/14] WIP: clk: add Atheros AR724X/AR913X/AR933X SoCs clock driver Antony Pavlov
2016-01-25 22:21   ` Alban
2016-01-31 20:41     ` Antony Pavlov
     [not found]       ` <20160131234155.eee918745880878963c044aa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-02-01 11:03         ` Alban
2016-01-30  0:27   ` Stephen Boyd
2016-02-01  0:23     ` Antony Pavlov
2016-01-23 20:17 ` [RFC v3 04/14] MIPS: dts: qca: ar9132: make extosc-related description shorter Antony Pavlov
     [not found] ` <1453580251-2341-1-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-01-23 20:17   ` Antony Pavlov [this message]
2016-01-23 20:17   ` [RFC v3 05/14] MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: drop unused alias node Antony Pavlov
     [not found]     ` <1453580251-2341-6-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-01-25 22:25       ` Alban
2016-01-23 20:17   ` [RFC v3 06/14] MIPS: dts: qca: ar9132: use short references for uart and spi nodes Antony Pavlov
2016-01-25 22:31     ` Alban
2016-02-01 18:41       ` Antony Pavlov
2016-01-23 20:17   ` [RFC v3 08/14] MIPS: dts: qca: introduce AR9331 devicetree Antony Pavlov
     [not found]     ` <1453580251-2341-9-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-01-25 22:46       ` Alban
2016-01-31 20:59         ` Antony Pavlov
2016-03-14 18:53         ` Antony Pavlov
2016-01-23 20:17   ` [RFC v3 09/14] MIPS: ath79: add initial support for TP-LINK MR3020 Antony Pavlov
2016-01-23 20:17   ` [RFC v3 10/14] devicetree: add Dragino vendor id Antony Pavlov
     [not found]     ` <1453580251-2341-11-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-01-26 21:16       ` Rob Herring
2016-01-23 20:17   ` [RFC v3 11/14] MIPS: ath79: add initial support for Dragino MS14 (Dragino 2) Antony Pavlov
2016-01-23 20:17   ` [RFC v3 12/14] devicetree: add Onion Corporation vendor id Antony Pavlov
     [not found]     ` <1453580251-2341-13-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-01-26 21:15       ` Rob Herring
2016-01-27  8:42         ` Antony Pavlov
2016-01-23 20:17   ` [RFC v3 13/14] MIPS: ath79: add initial support for Onion Omega Antony Pavlov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1453580251-2341-4-git-send-email-antonynpavlov@gmail.com \
    --to=antonynpavlov-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=albeu-GANU6spQydw@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).