From: Laxman Dewangan <ldewangan@nvidia.com>
To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
linus.walleij@linaro.org, gnurou@gmail.com, lee.jones@linaro.org,
broonie@kernel.org, a.zummo@towertech.it,
alexandre.belloni@free-electrons.com
Cc: lgirdwood@gmail.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
rtc-linux@googlegroups.com, swarren@nvidia.com,
treding@nvidia.com, k.kozlowski@samsung.com,
Laxman Dewangan <ldewangan@nvidia.com>
Subject: [PATCH V5 0/5] Add support for MAXIM MAX77620/MAX20024 PMIC
Date: Wed, 27 Jan 2016 19:40:03 +0530 [thread overview]
Message-ID: <1453903808-29788-1-git-send-email-ldewangan@nvidia.com> (raw)
Add SW support for MAXIM Semiconductor's Power Management
IC (PMIC) MAX77620/MAX20024. This PMIC supports DC-DC/LDOS, GPIOs,
RTC, watchdog, clocks etc.
This series add respective driver for each of sub-modules.
Changes from V1:
DT DOC:
- Added units in some of properties.
- Change the boolean property to tristate type and detail some of
properties.
RTC:
- Rename the file to rtc-max77xxx.c and make the generic implementation.
- Direct regmap apis are used for the register access.
- Decouped from max77620 driver.
- Taken care of cleanup comments form V1 version.
MFD:
- Code cleanups per review from V1.
- Move register access APIs from header to c file.
- Remove some of non required variable, remove duplication in error message
and simplify some of function implementation.
GPIO:
- Use the gpiochip_add_data and get the chip data from core APIs.
- Cleanups based on comment received on mfd/rtc.
- Avoid duplication on error message.
Pinctrl:
- Cleanup code based on comment received on mfd/rtc.
- Avoid duplication on error message.
Regulators:
- Cleanup code based on comment received on mfd/rtc.
- Avoid duplication on error message.
- Taken care of review comment from Mark.
Changes from V2:
- Run coccicheck and checkpatch in strict mode for the alignment.
- Drop RTC driver and its i2c client registartion.
- Refactor Regulator driver to use core API for DT parsing.
Changes from V3:
- Change all sys initcall to module driver.
- change the max77620_read argument to unisgned int from u8.
Changes from V4:
- Provide more details in the dt binding doc.
- Take care of fps nodes.
- Split the submodule's DT binding doc on respective folder.
- Drop the battery charger and low battery binding and related code as
it need to go on power driver.
Laxman Dewangan (5):
DT: mfd: add device-tree binding doc fro PMIC max77620/max20024
mfd: max77620: add core driver for MAX77620/MAX20024
pinctrl: max77620: add pincontrol driver for MAX77620/MAX20024
gpio: max77620: add gpio driver for MAX77620/MAX20024
regulator: max77620: add regulator driver for max77620/max20024
.../devicetree/bindings/gpio/gpio-max77620.txt | 25 +
Documentation/devicetree/bindings/mfd/max77620.txt | 118 +++
.../bindings/pinctrl/pinctrl-max77620.txt | 87 +++
.../bindings/regulator/regulator-max77620.txt | 163 ++++
drivers/gpio/Kconfig | 9 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-max77620.c | 292 +++++++
drivers/mfd/Kconfig | 15 +
drivers/mfd/Makefile | 1 +
drivers/mfd/max77620.c | 727 ++++++++++++++++++
drivers/pinctrl/Kconfig | 10 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-max77620.c | 693 +++++++++++++++++
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/max77620-regulator.c | 844 +++++++++++++++++++++
include/dt-bindings/mfd/max77620.h | 35 +
include/linux/mfd/max77620.h | 406 ++++++++++
18 files changed, 3437 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-max77620.txt
create mode 100644 Documentation/devicetree/bindings/mfd/max77620.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
create mode 100644 Documentation/devicetree/bindings/regulator/regulator-max77620.txt
create mode 100644 drivers/gpio/gpio-max77620.c
create mode 100644 drivers/mfd/max77620.c
create mode 100644 drivers/pinctrl/pinctrl-max77620.c
create mode 100644 drivers/regulator/max77620-regulator.c
create mode 100644 include/dt-bindings/mfd/max77620.h
create mode 100644 include/linux/mfd/max77620.h
--
2.1.4
next reply other threads:[~2016-01-27 14:10 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-27 14:10 Laxman Dewangan [this message]
2016-01-27 14:10 ` [PATCH V5 1/5] DT: mfd: add device-tree binding doc fro PMIC max77620/max20024 Laxman Dewangan
2016-01-27 14:10 ` [PATCH V5 2/5] mfd: max77620: add core driver for MAX77620/MAX20024 Laxman Dewangan
2016-01-27 14:10 ` [PATCH V5 3/5] pinctrl: max77620: add pincontrol " Laxman Dewangan
[not found] ` <1453903808-29788-4-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-02-01 13:58 ` Rob Herring
2016-01-27 14:10 ` [PATCH V5 4/5] gpio: max77620: add gpio " Laxman Dewangan
2016-01-29 16:30 ` Rob Herring
2016-02-01 8:32 ` Lee Jones
2016-01-27 14:10 ` [PATCH V5 5/5] regulator: max77620: add regulator driver for max77620/max20024 Laxman Dewangan
2016-01-28 3:55 ` Krzysztof Kozlowski
2016-01-28 6:24 ` Laxman Dewangan
2016-01-28 6:42 ` Krzysztof Kozlowski
2016-02-01 13:54 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453903808-29788-1-git-send-email-ldewangan@nvidia.com \
--to=ldewangan@nvidia.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gnurou@gmail.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=k.kozlowski@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=swarren@nvidia.com \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).