[PATCH 0/6] arm64: hip05: update

[PATCH 0/6] arm64: hip05: update

[Kefeng Wang]

Enable more feature in hip05 d02 board.

Kefeng Wang (6):
  arm64: dts: hip05: Add L2 cache topology
  arm64: dts: hip05: Use Cortex specific device node for pmu
  arm64: dts: hip05: Append all gicv3 ITS entries
  arm64: dts: hip05: Append gpio nodes
  arm64: dts: hip05: Append power button node for D02 board
  arm64: defconfig: Enable DesignWare APB GPIO controller

 arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 18 ++++++
 arch/arm64/boot/dts/hisilicon/hip05.dtsi    | 92 ++++++++++++++++++++++++++++-
 arch/arm64/configs/defconfig                |  1 +
 3 files changed, 109 insertions(+), 2 deletions(-)

-- 
2.6.0.GIT

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/6] arm64: dts: hip05: Add L2 cache topology

[Kefeng Wang]

The Hip05 SoC has four L2 cache for all 16 CPUs, every four cpus
share one L2 cache, add them to the dtsi file so that the cache
hierarchy can be probed.

Signed-off-by: Kefeng Wang <wangkefeng.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 arch/arm64/boot/dts/hisilicon/hip05.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
index c1ea999..db2039d 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -90,6 +90,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20000>;
 			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
 		};
 
 		cpu1: cpu@20001 {
@@ -97,6 +98,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20001>;
 			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
 		};
 
 		cpu2: cpu@20002 {
@@ -104,6 +106,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20002>;
 			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
 		};
 
 		cpu3: cpu@20003 {
@@ -111,6 +114,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20003>;
 			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
 		};
 
 		cpu4: cpu@20100 {
@@ -118,6 +122,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20100>;
 			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
 		};
 
 		cpu5: cpu@20101 {
@@ -125,6 +130,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20101>;
 			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
 		};
 
 		cpu6: cpu@20102 {
@@ -132,6 +138,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20102>;
 			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
 		};
 
 		cpu7: cpu@20103 {
@@ -139,6 +146,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20103>;
 			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
 		};
 
 		cpu8: cpu@20200 {
@@ -146,6 +154,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20200>;
 			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
 		};
 
 		cpu9: cpu@20201 {
@@ -153,6 +162,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20201>;
 			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
 		};
 
 		cpu10: cpu@20202 {
@@ -160,6 +170,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20202>;
 			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
 		};
 
 		cpu11: cpu@20203 {
@@ -167,6 +178,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20203>;
 			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
 		};
 
 		cpu12: cpu@20300 {
@@ -174,6 +186,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20300>;
 			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
 		};
 
 		cpu13: cpu@20301 {
@@ -181,6 +194,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20301>;
 			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
 		};
 
 		cpu14: cpu@20302 {
@@ -188,6 +202,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20302>;
 			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
 		};
 
 		cpu15: cpu@20303 {
@@ -195,6 +210,23 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20303>;
 			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
 		};
 	};
 
-- 
2.6.0.GIT

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/6] arm64: dts: hip05: Use Cortex specific device node for pmu

[Kefeng Wang]

Instead of using the generic armv8-pmuv3 compatibility, use
the more specific Cortex A57 compatibility.

Signed-off-by: Kefeng Wang <wangkefeng.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 arch/arm64/boot/dts/hisilicon/hip05.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
index db2039d..ed31f19 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -262,7 +262,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-- 
2.6.0.GIT

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 3/6] arm64: dts: hip05: Append all gicv3 ITS entries

[Kefeng Wang]

There are four subsystems in hip05 soc, peri/m3/pcie/dsa,
each subsystem has one its, append them under gicv3 node.

They will be used by hisilicon mbigen.

Signed-off-by: Kefeng Wang <wangkefeng.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 arch/arm64/boot/dts/hisilicon/hip05.dtsi | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
index ed31f19..c1b1a32 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -246,11 +246,29 @@
 		      <0x0 0xfe020000 0 0x10000>;       /* GICV */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-		its_totems: interrupt-controller@8c000000 {
+		its_peri: interrupt-controller@8c000000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			reg = <0x0 0x8c000000 0x0 0x40000>;
 		};
+
+		its_m3: interrupt-controller@a3000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0xa3000000 0x0 0x40000>;
+		};
+
+		its_pcie: interrupt-controller@b7000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0xb7000000 0x0 0x40000>;
+		};
+
+		its_dsa: interrupt-controller@c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0xc6000000 0x0 0x40000>;
+		};
 	};
 
 	timer {
-- 
2.6.0.GIT

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 4/6] arm64: dts: hip05: Append gpio nodes

[Kefeng Wang]

There are two dw GPIO controllers in hip05 peri sub, this patch
adds the corresponding device tree nodes.

Signed-off-by: Kefeng Wang <wangkefeng.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 arch/arm64/boot/dts/hisilicon/hip05.dtsi | 38 ++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
index c1b1a32..6319ff3 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -322,5 +322,43 @@
 			reg-io-width = <4>;
 			status = "disabled";
 		};
+
+		peri_gpio0: gpio@802e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x802e0000 0x0 0x10000>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		peri_gpio1: gpio@802f0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x802f0000 0x0 0x10000>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
 	};
 };
-- 
2.6.0.GIT

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 5/6] arm64: dts: hip05: Append power button node for D02 board

[Kefeng Wang]

This patch adds poweroff button device node to support
poweroff feature on hip05 d02 board.

Signed-off-by: Kefeng Wang <wangkefeng.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
index ae34e25..e9436c0 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include "hip05.dtsi"
 
 / {
@@ -29,8 +30,25 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrbutton {
+			label = "Power Button";
+			gpios = <&porta 8 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			debounce-interval = <0>;
+		};
+	};
 };
 
 &uart0 {
 	status = "ok";
 };
+
+&peri_gpio0 {
+	status = "ok";
+};
-- 
2.6.0.GIT

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 6/6] arm64: defconfig: Enable DesignWare APB GPIO controller

[Kefeng Wang]

The Synopsys DesignWare APB GPIO controller is used by several vender's socs,
like apm/marvell/altera/hisilicon, enable it by default.

Signed-off-by: Kefeng Wang <wangkefeng.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 86581f7..3380a04 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -145,6 +145,7 @@ CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_QUP=y
 CONFIG_PINCTRL_MSM8916=y
+CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_PL061=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_XGENE=y
-- 
2.6.0.GIT

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/6] arm64: hip05: update

[Kefeng Wang]

Ping, any comments, thanks.

On 2016/1/29 16:39, Kefeng Wang wrote:
> Enable more feature in hip05 d02 board.
> 
> Kefeng Wang (6):
>   arm64: dts: hip05: Add L2 cache topology
>   arm64: dts: hip05: Use Cortex specific device node for pmu
>   arm64: dts: hip05: Append all gicv3 ITS entries
>   arm64: dts: hip05: Append gpio nodes
>   arm64: dts: hip05: Append power button node for D02 board
>   arm64: defconfig: Enable DesignWare APB GPIO controller
> 
>  arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 18 ++++++
>  arch/arm64/boot/dts/hisilicon/hip05.dtsi    | 92 ++++++++++++++++++++++++++++-
>  arch/arm64/configs/defconfig                |  1 +
>  3 files changed, 109 insertions(+), 2 deletions(-)
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/6] arm64: hip05: update

[Wei Xu]

Hi Kefeng,

On 29/01/2016 16:39, Kefeng Wang wrote:
> Enable more feature in hip05 d02 board.
> 
> Kefeng Wang (6):
>   arm64: dts: hip05: Add L2 cache topology
>   arm64: dts: hip05: Use Cortex specific device node for pmu
>   arm64: dts: hip05: Append all gicv3 ITS entries
>   arm64: dts: hip05: Append gpio nodes
>   arm64: dts: hip05: Append power button node for D02 board
>   arm64: defconfig: Enable DesignWare APB GPIO controller
> 
>  arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 18 ++++++
>  arch/arm64/boot/dts/hisilicon/hip05.dtsi    | 92 ++++++++++++++++++++++++++++-
>  arch/arm64/configs/defconfig                |  1 +
>  3 files changed, 109 insertions(+), 2 deletions(-)
> 

Applied all the patches into the hisilicon soc tree.
Thanks!

Best Regards,
Wei

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html