From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>
Cc: linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v4 0/7] ARM: dts: r-car: Add BRG support for (H)SCIF
Date: Fri, 29 Jan 2016 11:04:36 +0100 [thread overview]
Message-ID: <1454061883-4043-1-git-send-email-geert+renesas@glider.be> (raw)
Hi Simon, Magnus,
This patch series adds support for the Baud Rate Generator for External
Clock (BRG), as found on SCIF and HSCIF, to the DTS files for all R-Car
Gen1, Gen2, and Gen3 SoCs. This increases the range and accuracy of
supported baud rates on (H)SCIF.
Support for the extra clocks in the DT bindings and in the driver has
been accepted in v4.5-rc1.
Changes compared to v3:
- Change one-line summary prefix to match current arm-soc practices,
- Rebased,
Changes compared to v2:
- Rename "int_clk" to "brg_int",
- Add support for R-Car M1A (r8a7778) and R-Car H1 (r8a7779),
- Add support for R-Car H2 (r8a7790), R-Car M2-N (r8a7793), and R-Car
E2 (r8a7794),
- Correct internal clock source ZS_CLK to S3D1 in patch description
for r8a7795,
This has been tested on r8a7778/bockw, r8a7779/marzen, r8a7791/koelsch,
r8a7794/alt, and r8a7795/salvator-x.
Dependencies:
- renesas-devel-20160129-v4.5-rc1,
- series "[PATCH v4 0/7] ARM: dts: R-Car: Add SCIF fallback
compatibility strings",
- series "[PATCH v4 00/11] ARM: dts: shmobile: Rename the serial port
clock to fck",
Thanks for applying!
Geert Uytterhoeven (7):
ARM: dts: r8a7778: Add BRG support for SCIF
ARM: dts: r8a7779: Add BRG support for SCIF
ARM: dts: r8a7790: Add BRG support for (H)SCIF
ARM: dts: r8a7791: Add BRG support for (H)SCIF
ARM: dts: r8a7793: Add BRG support for SCIF
ARM: dts: r8a7794: Add BRG support for (H)SCIF
arm64: dts: r8a7795: Add BRG support for (H)SCIF
arch/arm/boot/dts/r8a7778.dtsi | 39 +++++++++++------
arch/arm/boot/dts/r8a7779.dtsi | 39 +++++++++++------
arch/arm/boot/dts/r8a7790.dtsi | 29 +++++++++----
arch/arm/boot/dts/r8a7791.dtsi | 54 +++++++++++++++--------
arch/arm/boot/dts/r8a7793.dtsi | 54 +++++++++++++++--------
arch/arm/boot/dts/r8a7794.dtsi | 54 +++++++++++++++--------
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 74 ++++++++++++++++++++++----------
7 files changed, 235 insertions(+), 108 deletions(-)
--
1.9.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next reply other threads:[~2016-01-29 10:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-29 10:04 Geert Uytterhoeven [this message]
2016-01-29 10:04 ` [PATCH v4 1/7] ARM: dts: r8a7778: Add BRG support for SCIF Geert Uytterhoeven
2016-01-29 10:04 ` [PATCH v4 2/7] ARM: dts: r8a7779: " Geert Uytterhoeven
2016-01-29 10:04 ` [PATCH v4 3/7] ARM: dts: r8a7790: Add BRG support for (H)SCIF Geert Uytterhoeven
[not found] ` <1454061883-4043-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2016-01-29 10:04 ` [PATCH v4 4/7] ARM: dts: r8a7791: " Geert Uytterhoeven
2016-01-29 10:04 ` [PATCH v4 7/7] arm64: dts: r8a7795: " Geert Uytterhoeven
2016-01-29 10:04 ` [PATCH v4 5/7] ARM: dts: r8a7793: Add BRG support for SCIF Geert Uytterhoeven
2016-01-29 10:04 ` [PATCH v4 6/7] ARM: dts: r8a7794: Add BRG support for (H)SCIF Geert Uytterhoeven
2016-02-02 10:20 ` [PATCH v4 0/7] ARM: dts: r-car: " Simon Horman
[not found] ` <20160202102031.GD15554-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
2016-02-02 10:38 ` Geert Uytterhoeven
2016-02-02 12:52 ` Simon Horman
2016-02-02 12:57 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454061883-4043-1-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).