From: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: Antony Pavlov
<antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>,
Alban Bedel <albeu-GANU6spQydw@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [RFC v4 09/15] MIPS: dts: qca: introduce AR9331 devicetree
Date: Mon, 1 Feb 2016 03:10:34 +0300 [thread overview]
Message-ID: <1454285440-18916-10-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1454285440-18916-1-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
This patch introduces devicetree for Atheros AR9331 SoC (AKA Hornet).
The AR9331 chip is a Wi-Fi System-On-Chip (WiSOC),
typically used in very cheap Access Points and Routers.
Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Cc: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
arch/mips/boot/dts/qca/ar9331.dtsi | 158 +++++++++++++++++++++++++++++++++++++
1 file changed, 158 insertions(+)
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
new file mode 100644
index 0000000..854778b
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -0,0 +1,158 @@
+#include <dt-bindings/clock/ath79-clk.h>
+
+/ {
+ compatible = "qca,ar9331";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ reg = <0>;
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ compatible = "qca,ar7100-cpu-intc";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,ddr-wb-channel-interrupts = <2>, <3>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
+ };
+
+ extosc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+
+ apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&miscintc>;
+
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: uart@18020000 {
+ compatible = "qca,ar9330-uart";
+ reg = <0x18020000 0x14>;
+
+ interrupts = <3>;
+
+ clocks = <&pll ATH79_CLK_UART>;
+ clock-names = "uart";
+
+ status = "disabled";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar7100-gpio";
+ reg = <0x18040000 0x34>;
+ interrupts = <2>;
+
+ ngpios = <30>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ status = "disabled";
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar9330-pll";
+ reg = <0x18050000 0x100
+ 0x18060000 0x100>;
+
+ clocks = <&extosc>;
+ clock-names = "ref";
+
+ #clock-cells = <1>;
+ };
+
+ miscintc: interrupt-controller@18060010 {
+ compatible = "qca,ar7240-misc-intc";
+ reg = <0x18060010 0x4>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ rst: reset-controller@1806001c {
+ compatible = "qca,ar7100-reset";
+ reg = <0x1806001c 0x4>;
+
+ #reset-cells = <1>;
+ };
+
+ usb: usb@1b000100 {
+ compatible = "qca,ar7100-ehci", "generic-ehci";
+ reg = <0x1b000100 0x100>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+ resets = <&rst 5>;
+
+ has-transaction-translator;
+
+ phy-names = "usb";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar7100-spi";
+ reg = <0x1f000000 0x10>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "ahb";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+ };
+
+ usb_phy: usb-phy {
+ compatible = "qca,ar7100-usb-phy";
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-02-01 0:10 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1454285440-18916-1-git-send-email-antonynpavlov@gmail.com>
2016-02-01 0:10 ` [RFC v4 01/15] WIP: clk: add Atheros AR724X/AR913X/AR933X SoCs clock driver Antony Pavlov
2016-02-01 0:10 ` [RFC v4 04/15] MIPS: dts: qca: ar9132: use dt-bindings/clock/ath79-clk.h macros Antony Pavlov
2016-02-01 0:10 ` [RFC v4 05/15] MIPS: dts: qca: ar9132: make extosc-related description shorter Antony Pavlov
[not found] ` <1454285440-18916-1-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-02-01 0:10 ` [RFC v4 06/15] MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: drop unused alias node Antony Pavlov
2016-02-01 0:10 ` [RFC v4 07/15] MIPS: dts: qca: ar9132: use short references for uart, usb and spi nodes Antony Pavlov
2016-02-01 0:10 ` Antony Pavlov [this message]
2016-02-01 0:10 ` [RFC v4 10/15] MIPS: ath79: add initial support for TP-LINK MR3020 Antony Pavlov
2016-02-01 0:10 ` [RFC v4 11/15] devicetree: add Dragino vendor id Antony Pavlov
2016-02-01 14:43 ` Rob Herring
2016-02-01 0:10 ` [RFC v4 12/15] MIPS: ath79: add initial support for Dragino MS14 (Dragino 2) Antony Pavlov
2016-02-01 0:10 ` [RFC v4 13/15] devicetree: add Onion Corporation vendor id Antony Pavlov
[not found] ` <1454285440-18916-14-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-02-01 14:42 ` Rob Herring
2016-02-01 0:10 ` [RFC v4 14/15] MIPS: ath79: add initial support for Onion Omega Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454285440-18916-10-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=albeu-GANU6spQydw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org \
--cc=linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).