From: Linus Walleij <linus.walleij@linaro.org>
To: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] dt-bindings: Add TPO TPG110 binding
Date: Mon, 1 Feb 2016 09:50:43 +0100 [thread overview]
Message-ID: <1454316643-3931-1-git-send-email-linus.walleij@linaro.org> (raw)
This adds device tree bindings for the TPO TPG110 panel found
mounted in the Nomadik NHK8815.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
.../bindings/display/panel/tpo,tpg110.txt | 47 ++++++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt
new file mode 100644
index 000000000000..acbc6bef3593
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt
@@ -0,0 +1,47 @@
+TPO TPG110 Panel
+================
+
+This binding builds on the DPI bindings, adding a few properties
+as a superset of a DPI. See panel-dpi.txt for the required DPI
+bindings.
+
+Required properties:
+- compatible : "tpo,tpg110"
+- grestb-gpio : panel reset GPIO
+- scen-gpios : serial control enable GPIO
+- scl-gpios : serial control clock line GPIO
+- sda-gpios : serial control data line GPIO
+
+Required nodes:
+- Video port for DPI input, see panel-dpi.txt
+- Panel timing for DPI setup, see panel-dpi.txt
+
+Example
+-------
+
+panel {
+ compatible = "tpo,tpg110", "panel-dpi";
+ grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>;
+ scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ backlight = <&bl>;
+
+ port {
+ nomadik_clcd_panel: endpoint {
+ remote-endpoint = <&nomadik_clcd_pads>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <33200000>;
+ hactive = <800>;
+ hback-porch = <216>;
+ hfront-porch = <40>;
+ hsync-len = <1>;
+ vactive = <480>;
+ vback-porch = <35>;
+ vfront-porch = <10>;
+ vsync-len = <1>;
+ };
+};
--
2.4.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2016-02-01 8:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-01 8:50 Linus Walleij [this message]
2016-02-01 13:22 ` [PATCH 2/2] dt-bindings: Add TPO TPG110 binding Rob Herring
2016-02-02 16:28 ` Thierry Reding
2016-02-13 19:07 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454316643-3931-1-git-send-email-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).