From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Subject: [PATCH] ARM: dts: sun9i: a80-optimus: Remove i2c3 and uart4 Date: Mon, 1 Feb 2016 22:59:58 +0800 Message-ID: <1454338798-5929-1-git-send-email-wens@csie.org> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Maxime Ripard Cc: Chen-Yu Tsai , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org i2c3 and uart4 are available on the GPIO header. Though these pins only have this one special function, the user may choose to use them as GPIOs instead. Since our policy is not to choose what function to present on the GPIO headers of development boards, remove them. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 958160e40fd0..d7a20d92b114 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -109,17 +109,6 @@ status = "okay"; }; -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; - status = "okay"; -}; - -&i2c3_pins_a { - /* Enable internal pull-up */ - allwinner,pull = ; -}; - &ohci0 { status = "okay"; }; @@ -212,17 +201,6 @@ status = "okay"; }; -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; -}; - -&uart4_pins_a { - /* Enable internal pull-up */ - allwinner,pull = ; -}; - &usbphy1 { phy-supply = <®_usb1_vbus>; status = "okay"; -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html