From: Caesar Wang <wxt@rock-chips.com>
To: heiko@sntech.de
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-rockchip@lists.infradead.org, keescook@google.com,
linux-kernel@vger.kernel.org, jeffy.chen@rock-chips.com,
leozwang@google.com, Caesar Wang <wxt@rock-chips.com>
Subject: [PATCH v5 8/8] ARM: dts: rockchip: support the spi for rk3036
Date: Tue, 2 Feb 2016 11:40:53 +0800 [thread overview]
Message-ID: <1454384453-7127-4-git-send-email-wxt@rock-chips.com> (raw)
In-Reply-To: <1454384453-7127-1-git-send-email-wxt@rock-chips.com>
This patch adds the needed spi node for rk3036 dts.
We have to use the 4 bus emmc to work if someone want to support
the spi devices, since the pins are re-used by emmc data[5-8] and spi.
In some caseswe need to support the spi devices, that will waste the
emmc performance.
Moment, the kylin/evb hasn't the spi devices to work, so maybe we need wait
the new required to enable in kylin/evb board.
Anyway, the spi should be needed land in rk3036 dts.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---
Changes in v5:
- Remove the unused, as Heiko comments on https://patchwork.kernel.org/patch/8147761/
- Modify the commit.
Changes in v4:
- Add this patch included in kylin series patches.
arch/arm/boot/dts/rk3036.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 532f232..30bb316 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -60,6 +60,7 @@
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
+ spi = &spi;
};
memory {
@@ -485,6 +486,21 @@
status = "disabled";
};
+ spi: spi@20074000 {
+ compatible = "rockchip,rockchip-spi";
+ reg = <0x20074000 0x1000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>;
+ clock-names = "apb-pclk","spi_pclk";
+ dmas = <&pdma 8>, <&pdma 9>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3036-pinctrl";
rockchip,grf = <&grf>;
@@ -723,5 +739,29 @@
};
/* no rts / cts for uart2 */
};
+
+ spi {
+ spi_txd:spi-txd {
+ rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
+ };
+
+ spi_rxd:spi-rxd {
+ rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>;
+ };
+
+ spi_clk:spi-clk {
+ rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ spi_cs0:spi-cs0 {
+ rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>;
+
+ };
+
+ spi_cs1:spi-cs1 {
+ rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>;
+
+ };
+ };
};
};
--
1.9.1
next prev parent reply other threads:[~2016-02-02 3:40 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1454384032-6794-1-git-send-email-wxt@rock-chips.com>
[not found] ` <1454384032-6794-1-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-02-02 3:40 ` [PATCH v5 1/8] ARM: dts: rockchip: add hdmi/vop device node for rk3036 Caesar Wang
2016-02-02 3:40 ` [PATCH v5 3/8] ARM: dts: rockchip: add support emac for RK3036 Caesar Wang
2016-02-02 3:40 ` [PATCH v5 4/8] ARM: dts: rockchip: add mclk for rt5616 on kylin board Caesar Wang
2016-02-02 21:23 ` Heiko Stübner
2016-02-02 3:40 ` Caesar Wang [this message]
[not found] ` <1454384453-7127-4-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-02-02 21:29 ` [PATCH v5 8/8] ARM: dts: rockchip: support the spi for rk3036 Heiko Stübner
[not found] ` <1454384453-7127-1-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-02-21 0:03 ` [PATCH v5 1/8] ARM: dts: rockchip: add hdmi/vop device node " Heiko Stuebner
2016-02-21 2:18 ` Caesar Wang
2016-02-02 3:44 ` [PATCH v5 5/8] ASoC: rt5616: add mclk property for rt5616 document Caesar Wang
2016-02-02 3:44 ` [PATCH v5 6/8] ASoC: rt5616: trivial: fix the typo Caesar Wang
2016-02-02 3:44 ` [PATCH v5 7/8] ASoC: rt5616: add the mclk for the codec driver Caesar Wang
[not found] ` <1454384680-7197-1-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-02-02 19:36 ` [PATCH v5 5/8] ASoC: rt5616: add mclk property for rt5616 document Mark Brown
2016-02-03 0:52 ` Caesar Wang
2016-02-02 3:48 ` [PATCH v5 2/8] clk: rockchip: rk3036: fix and add node id for emac clock Caesar Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454384453-7127-4-git-send-email-wxt@rock-chips.com \
--to=wxt@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jeffy.chen@rock-chips.com \
--cc=keescook@google.com \
--cc=leozwang@google.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).