From: Franklin S Cooper Jr <fcooper-l0cyMroinI0@public.gmane.org>
To: nm-l0cyMroinI0@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
ssantosh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: Franklin S Cooper Jr <fcooper-l0cyMroinI0@public.gmane.org>
Subject: [PATCH 0/3] Add initial support for TI's K2G SOC
Date: Tue, 2 Feb 2016 17:25:14 -0600 [thread overview]
Message-ID: <1454455517-7360-1-git-send-email-fcooper@ti.com> (raw)
This patchset provides initial support for K2G the latest addition to Texas
Instruments Keystone 2 product family. These patches are built on top of
the latest 4.5-rc2 commit.
K2G is a A15 + C66x DSP processor built to address the needs of industrial
communication and control, automotive and performance audio applications.
Supported peripherals include MMC,USB2.0,DCAN,DSS,McASP and PCIe SS.
The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf
This patchset provides the ability to boot K2G's general purpose evm using
a ramfs filesystem.
Additional patches will follow this series that will add support for new
drivers that will enable additional peripherals and features
K2G Bootlog on 4.5-rc2:
http://pastebin.ubuntu.com/14861580/
To show no regressions:
K2E Bootlog: http://pastebin.ubuntu.com/14861523/
Other Keystone 2 devices need this partial revert discussed in the below
thread.
http://marc.info/?l=linux-netdev&m=145444838030865&w=2
This is an issue seen on the netcp driver and has nothing to do with this
patch set.
Nishanth Menon (1):
ARM: keystone: Create new binding for K2G SoC
Vitaly Andrianov (2):
ARM: dts: keystone: Add Initial DT support for TI K2G SoC family
ARM: dts: keystone: Add minimum support for K2G evm
.../devicetree/bindings/arm/keystone/keystone.txt | 5 ++
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/k2g-evm.dts | 32 ++++++++
arch/arm/boot/dts/k2g.dtsi | 89 ++++++++++++++++++++++
arch/arm/mach-keystone/keystone.c | 1 +
5 files changed, 129 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/k2g-evm.dts
create mode 100644 arch/arm/boot/dts/k2g.dtsi
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-02-02 23:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-02 23:25 Franklin S Cooper Jr [this message]
[not found] ` <1454455517-7360-1-git-send-email-fcooper-l0cyMroinI0@public.gmane.org>
2016-02-02 23:25 ` [PATCH 1/3] ARM: keystone: Create new binding for K2G SoC Franklin S Cooper Jr
[not found] ` <1454455517-7360-2-git-send-email-fcooper-l0cyMroinI0@public.gmane.org>
2016-02-08 16:11 ` Rob Herring
2016-02-02 23:25 ` [PATCH 2/3] ARM: dts: keystone: Add Initial DT support for TI K2G SoC family Franklin S Cooper Jr
2016-02-02 23:25 ` [PATCH 3/3] ARM: dts: keystone: Add minimum support for K2G evm Franklin S Cooper Jr
2016-02-02 23:59 ` [PATCH 0/3] Add initial support for TI's K2G SOC santosh shilimkar
[not found] ` <56B142E8.4090301-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2016-02-05 18:42 ` santosh shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454455517-7360-1-git-send-email-fcooper@ti.com \
--to=fcooper-l0cymroini0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=nm-l0cyMroinI0@public.gmane.org \
--cc=ssantosh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).