From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Tinkham Subject: [PATCH 3/3] power: bq24735-charger: document 'ti,external-control' option Date: Tue, 2 Feb 2016 23:03:46 -0700 Message-ID: <1454479426-6437-4-git-send-email-sctincman@gmail.com> References: <1454479426-6437-1-git-send-email-sctincman@gmail.com> Return-path: In-Reply-To: <1454479426-6437-1-git-send-email-sctincman@gmail.com> Sender: linux-pm-owner@vger.kernel.org To: linux-pm@vger.kernel.org, devicetree@vger.kernel.org Cc: sre@kernel.org, dbaryshkov@gmail.com, dwmw2@infradead.org, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, Jonathan Tinkham List-Id: devicetree@vger.kernel.org Implement an 'external-control' option for when the charger shouldn't be configured by the kernel. Signed-off-by: Jonathan Tinkham --- Documentation/devicetree/bindings/power_supply/ti,bq24735.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt index 4f6a550..3bf5575 100644 --- a/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt +++ b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt @@ -22,6 +22,9 @@ Optional properties : value must be between 128mA and 8.064A with a 128mA step resolution. The POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for more information about the InputCurrent (0x3fh) register. + - ti,external-control : Indicates that the charger is configured externally + and that the host should not attempt to enable/disable charging or set the + charge voltage/current. Example: -- 2.7.0