From: Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: patrice.chotard-qxv4g6HH51o@public.gmane.org,
Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
afaerber-l3A5Bk7waGM@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Daniel Thompson
<daniel.thompson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
bruherrera-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: [PATCH v5 6/9] ARM: dts: Add pinctrl node to STM32F429
Date: Wed, 3 Feb 2016 12:04:42 +0100 [thread overview]
Message-ID: <1454497485-464-7-git-send-email-mcoquelin.stm32@gmail.com> (raw)
In-Reply-To: <1454497485-464-1-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The STM32F429 MCU has 11 GPIO banks, with 16 pins per bank.
Acked-by: Patrice Chotard <patrice.chotard-qxv4g6HH51o@public.gmane.org>
Acked-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/stm32f429.dtsi | 97 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 5e1e234..62d2b3d 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -46,6 +46,7 @@
*/
#include "armv7-m.dtsi"
+#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
/ {
clocks {
@@ -168,6 +169,102 @@
status = "disabled";
};
+ pin-controller {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32f429-pinctrl";
+ ranges = <0 0x40020000 0x3000>;
+ pins-are-numbered;
+
+ gpioa: gpio@40020000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc 0 256>;
+ st,bank-name = "GPIOA";
+ };
+
+ gpiob: gpio@40020400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x400 0x400>;
+ clocks = <&rcc 0 257>;
+ st,bank-name = "GPIOB";
+ };
+
+ gpioc: gpio@40020800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x800 0x400>;
+ clocks = <&rcc 0 258>;
+ st,bank-name = "GPIOC";
+ };
+
+ gpiod: gpio@40020c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0xc00 0x400>;
+ clocks = <&rcc 0 259>;
+ st,bank-name = "GPIOD";
+ };
+
+ gpioe: gpio@40021000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc 0 260>;
+ st,bank-name = "GPIOE";
+ };
+
+ gpiof: gpio@40021400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1400 0x400>;
+ clocks = <&rcc 0 261>;
+ st,bank-name = "GPIOF";
+ };
+
+ gpiog: gpio@40021800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1800 0x400>;
+ clocks = <&rcc 0 262>;
+ st,bank-name = "GPIOG";
+ };
+
+ gpioh: gpio@40021c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1c00 0x400>;
+ clocks = <&rcc 0 263>;
+ st,bank-name = "GPIOH";
+ };
+
+ gpioi: gpio@40022000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc 0 264>;
+ st,bank-name = "GPIOI";
+ };
+
+ gpioj: gpio@40022400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2400 0x400>;
+ clocks = <&rcc 0 265>;
+ st,bank-name = "GPIOJ";
+ };
+
+ gpiok: gpio@40022800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2800 0x400>;
+ clocks = <&rcc 0 266>;
+ st,bank-name = "GPIOK";
+ };
+ };
+
rcc: rcc@40023810 {
#clock-cells = <2>;
compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-02-03 11:04 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-03 11:04 [PATCH v5 0/9] Add STM32 pinctrl/GPIO driver Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 1/9] ARM: Kconfig: Introduce MACH_STM32F429 flag Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 2/9] Documentation: dt-bindings: Document STM32 pinctrl driver DT bindings Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 3/9] includes: dt-bindings: Add STM32F429 pinctrl " Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 4/9] pinctrl: Add STM32 MCUs support Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 5/9] ARM: mach-stm32: Select pinctrl Maxime Coquelin
[not found] ` <1454497485-464-1-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-02-03 11:04 ` Maxime Coquelin [this message]
2016-02-03 11:04 ` [PATCH v5 7/9] ARM: dts: Add USART1 pin config to STM32F429 boards Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 8/9] ARM: dts: Add leds support " Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 9/9] ARM: config: Enable GPIO Led driver in stm32_defconfig Maxime Coquelin
2016-02-08 17:50 ` [PATCH v5 0/9] Add STM32 pinctrl/GPIO driver Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454497485-464-7-git-send-email-mcoquelin.stm32@gmail.com \
--to=mcoquelin.stm32-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=afaerber-l3A5Bk7waGM@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=bruherrera-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=daniel.thompson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=patrice.chotard-qxv4g6HH51o@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).