* [PATCH 1/2] devicetree: qcom-apq8064.dtsi: Add i2c3 address-cells and size-cells values @ 2016-02-05 18:06 John Stultz 2016-02-05 18:06 ` [PATCH 2/2] devicetree: Add DTS file to support the Nexus7 2013 (flo) device John Stultz 0 siblings, 1 reply; 8+ messages in thread From: John Stultz @ 2016-02-05 18:06 UTC (permalink / raw) To: lkml Cc: John Stultz, Rob Herring, Arnd Bergmann, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Andy Gross, Russell King, Vinay Simha BN, Bjorn Andersson, Stephen Boyd, linux-arm-msm, devicetree This adds address-cell and size-cell values to the i2c3 bus in the qcom-apq8064.dtsi, which is needed to describe devices on that bus. Cc: Rob Herring <robh+dt@kernel.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: John Stultz <john.stultz@linaro.org> --- arch/arm/boot/dts/qcom-apq8064.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index ed521e8..5093c35 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -337,6 +337,8 @@ clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; }; }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] devicetree: Add DTS file to support the Nexus7 2013 (flo) device. 2016-02-05 18:06 [PATCH 1/2] devicetree: qcom-apq8064.dtsi: Add i2c3 address-cells and size-cells values John Stultz @ 2016-02-05 18:06 ` John Stultz 2016-02-05 19:01 ` Rob Herring 0 siblings, 1 reply; 8+ messages in thread From: John Stultz @ 2016-02-05 18:06 UTC (permalink / raw) To: lkml Cc: John Stultz, Rob Herring, Arnd Bergmann, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Andy Gross, Russell King, Vinay Simha BN, Bjorn Andersson, Stephen Boyd, linux-arm-msm, devicetree This patch adds a dts file to support the Nexus7 2013 device. Its based off of the qcom-apq8064-ifc6410.dts which is similar hardware. Also includes some comments and context folded in from Vinay Simha BN <simhavcs@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 276 +++++++++++++++++++++ 2 files changed, 277 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a4a6d70..5b16715 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -524,6 +524,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8064-sony-xperia-yuga.dtb \ + qcom-apq8064-asus-nexus7-flo.dts \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts new file mode 100644 index 0000000..c535b3f --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -0,0 +1,276 @@ +#include "qcom-apq8064-v2.0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +/ { + model = "Asus Nexus7(flo)"; + compatible = "asus,nexus7-flo", "qcom,apq8064"; + + aliases { + serial0 = &gsbi7_serial; + serial1 = &gsbi6_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_3p3v: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + power { + label = "Power"; + gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + volume_up { + label = "Volume Up"; + gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_VOLUMEUP>; + }; + volume_down { + label = "Volume Down"; + gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + soc { + rpm@108000 { + regulators { + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vin_lvs2-supply = <&pm8921_s1>; + + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + vdd_ncp-supply = <&pm8921_l6>; + + /* Buck SMPS */ + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + /* msm otg HSUSB_VDDCX */ + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + }; + + /* + * msm_sdcc.1-sdc-vdd_io + * tabla2x-slim-CDC_VDDA_RX + * tabla2x-slim-CDC_VDDA_TX + * tabla2x-slim-CDC_VDD_CP + * tabla2x-slim-VDDIO_CDC + */ + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + regulator-always-on; + }; + + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + /* mipi_dsi.1-dsi1_pll_vdda */ + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* msm_otg-HSUSB_3p3 */ + l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + /* msm_otg-HSUSB_1p8 */ + l4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* msm_sdcc.1-sdc_vdd */ + l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + bias-pull-down; + }; + + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + /* mipi_dsi.1-dsi1_avdd */ + l11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + /* pwm_power for backlight */ + l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + bias-pull-down; + }; + + /* camera, qdsp6 */ + l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* + * tabla2x-slim-CDC_VDDA_A_1P2V + * tabla2x-slim-VDDD_CDC_D + */ + l25 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + lvs1 { + bias-pull-down; + }; + + lvs4 { + bias-pull-down; + }; + + lvs5 { + bias-pull-down; + }; + + lvs6 { + bias-pull-down; + }; + /* + * mipi_dsi.1-dsi1_vddio + * pil_riva-pll_vdd + */ + lvs7 { + bias-pull-down; + }; + }; + }; + + gsbi@16200000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@16280000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + trackpad@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + }; + }; + }; + + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + }; + }; + + gsbi@16500000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@16540000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + }; + }; + + gsbi@16600000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + status = "ok"; + }; + }; + + /* OTG */ + phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb@12500000 { + status = "okay"; + }; + + amba { + /* eMMC */ + sdcc@12400000 { + status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + }; + }; + }; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] devicetree: Add DTS file to support the Nexus7 2013 (flo) device. 2016-02-05 18:06 ` [PATCH 2/2] devicetree: Add DTS file to support the Nexus7 2013 (flo) device John Stultz @ 2016-02-05 19:01 ` Rob Herring [not found] ` <CAL_JsqL1koD3OWM4-cqEOJUz-yuZuUeg1tmp6V39mPE0zrNPgg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2016-02-05 19:21 ` [PATCH 2/2 v2] " John Stultz 0 siblings, 2 replies; 8+ messages in thread From: Rob Herring @ 2016-02-05 19:01 UTC (permalink / raw) To: John Stultz Cc: lkml, Arnd Bergmann, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Andy Gross, Russell King, Vinay Simha BN, Bjorn Andersson, Stephen Boyd, linux-arm-msm, devicetree@vger.kernel.org On Fri, Feb 5, 2016 at 12:06 PM, John Stultz <john.stultz@linaro.org> wrote: > This patch adds a dts file to support the Nexus7 2013 > device. Its based off of the qcom-apq8064-ifc6410.dts > which is similar hardware. > > Also includes some comments and context folded in > from Vinay Simha BN <simhavcs@gmail.com> > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Arnd Bergmann <arnd.bergmann@linaro.org> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: Kumar Gala <galak@codeaurora.org> > Cc: Andy Gross <agross@codeaurora.org> > Cc: Russell King <linux@arm.linux.org.uk> > Cc: Vinay Simha BN <simhavcs@gmail.com> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Stephen Boyd <stephen.boyd@linaro.org> > Cc: linux-arm-msm@vger.kernel.org > Cc: devicetree@vger.kernel.org > Signed-off-by: John Stultz <john.stultz@linaro.org> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 276 +++++++++++++++++++++ > 2 files changed, 277 insertions(+) > create mode 100644 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index a4a6d70..5b16715 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -524,6 +524,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ > qcom-apq8064-cm-qs600.dtb \ > qcom-apq8064-ifc6410.dtb \ > qcom-apq8064-sony-xperia-yuga.dtb \ > + qcom-apq8064-asus-nexus7-flo.dts \ s/dts/dtb/ You must not be doing "make dtbs". Otherwise, for both patches: Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <CAL_JsqL1koD3OWM4-cqEOJUz-yuZuUeg1tmp6V39mPE0zrNPgg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH 2/2] devicetree: Add DTS file to support the Nexus7 2013 (flo) device. [not found] ` <CAL_JsqL1koD3OWM4-cqEOJUz-yuZuUeg1tmp6V39mPE0zrNPgg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2016-02-05 19:13 ` John Stultz 0 siblings, 0 replies; 8+ messages in thread From: John Stultz @ 2016-02-05 19:13 UTC (permalink / raw) To: Rob Herring Cc: lkml, Arnd Bergmann, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Andy Gross, Russell King, Vinay Simha BN, Bjorn Andersson, Stephen Boyd, linux-arm-msm, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org On Fri, Feb 5, 2016 at 11:01 AM, Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote: > On Fri, Feb 5, 2016 at 12:06 PM, John Stultz <john.stultz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote: >> This patch adds a dts file to support the Nexus7 2013 >> device. Its based off of the qcom-apq8064-ifc6410.dts >> which is similar hardware. >> >> Also includes some comments and context folded in >> from Vinay Simha BN <simhavcs-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> >> >> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> >> Cc: Arnd Bergmann <arnd.bergmann-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org> >> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> >> Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org> >> Cc: Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> >> Cc: Andy Gross <agross-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> >> Cc: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org> >> Cc: Vinay Simha BN <simhavcs-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> >> Cc: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> Cc: Stephen Boyd <stephen.boyd-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org >> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org >> Signed-off-by: John Stultz <john.stultz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> --- >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 276 +++++++++++++++++++++ >> 2 files changed, 277 insertions(+) >> create mode 100644 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index a4a6d70..5b16715 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -524,6 +524,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ >> qcom-apq8064-cm-qs600.dtb \ >> qcom-apq8064-ifc6410.dtb \ >> qcom-apq8064-sony-xperia-yuga.dtb \ >> + qcom-apq8064-asus-nexus7-flo.dts \ > > s/dts/dtb/ > > You must not be doing "make dtbs". Gak. You're right. Will fix and resend here. > Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> thanks! -john -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2 v2] devicetree: Add DTS file to support the Nexus7 2013 (flo) device. 2016-02-05 19:01 ` Rob Herring [not found] ` <CAL_JsqL1koD3OWM4-cqEOJUz-yuZuUeg1tmp6V39mPE0zrNPgg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2016-02-05 19:21 ` John Stultz 2016-02-13 5:16 ` John Stultz 2016-02-13 22:32 ` Linus Walleij 1 sibling, 2 replies; 8+ messages in thread From: John Stultz @ 2016-02-05 19:21 UTC (permalink / raw) To: lkml Cc: John Stultz, Rob Herring, Arnd Bergmann, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Andy Gross, Russell King, Vinay Simha BN, Bjorn Andersson, Stephen Boyd, linux-arm-msm, devicetree This patch adds a dts file to support the Nexus7 2013 device. Its based off of the qcom-apq8064-ifc6410.dts which is similar hardware. Also includes some comments and context folded in from Vinay Simha BN <simhavcs@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> --- v2: Fix dts/dtb typeo in makefile pointed out by Rob arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 276 +++++++++++++++++++++ 2 files changed, 277 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a4a6d70..f6444be 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -524,6 +524,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8064-sony-xperia-yuga.dtb \ + qcom-apq8064-asus-nexus7-flo.dtb \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts new file mode 100644 index 0000000..c535b3f --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -0,0 +1,276 @@ +#include "qcom-apq8064-v2.0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +/ { + model = "Asus Nexus7(flo)"; + compatible = "asus,nexus7-flo", "qcom,apq8064"; + + aliases { + serial0 = &gsbi7_serial; + serial1 = &gsbi6_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_3p3v: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + power { + label = "Power"; + gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + volume_up { + label = "Volume Up"; + gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_VOLUMEUP>; + }; + volume_down { + label = "Volume Down"; + gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + soc { + rpm@108000 { + regulators { + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vin_lvs2-supply = <&pm8921_s1>; + + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + vdd_ncp-supply = <&pm8921_l6>; + + /* Buck SMPS */ + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + /* msm otg HSUSB_VDDCX */ + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + }; + + /* + * msm_sdcc.1-sdc-vdd_io + * tabla2x-slim-CDC_VDDA_RX + * tabla2x-slim-CDC_VDDA_TX + * tabla2x-slim-CDC_VDD_CP + * tabla2x-slim-VDDIO_CDC + */ + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + regulator-always-on; + }; + + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + /* mipi_dsi.1-dsi1_pll_vdda */ + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* msm_otg-HSUSB_3p3 */ + l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + /* msm_otg-HSUSB_1p8 */ + l4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* msm_sdcc.1-sdc_vdd */ + l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + bias-pull-down; + }; + + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + /* mipi_dsi.1-dsi1_avdd */ + l11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + /* pwm_power for backlight */ + l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + bias-pull-down; + }; + + /* camera, qdsp6 */ + l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* + * tabla2x-slim-CDC_VDDA_A_1P2V + * tabla2x-slim-VDDD_CDC_D + */ + l25 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + lvs1 { + bias-pull-down; + }; + + lvs4 { + bias-pull-down; + }; + + lvs5 { + bias-pull-down; + }; + + lvs6 { + bias-pull-down; + }; + /* + * mipi_dsi.1-dsi1_vddio + * pil_riva-pll_vdd + */ + lvs7 { + bias-pull-down; + }; + }; + }; + + gsbi@16200000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@16280000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + trackpad@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + }; + }; + }; + + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + }; + }; + + gsbi@16500000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@16540000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + }; + }; + + gsbi@16600000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + status = "ok"; + }; + }; + + /* OTG */ + phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb@12500000 { + status = "okay"; + }; + + amba { + /* eMMC */ + sdcc@12400000 { + status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + }; + }; + }; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2 v2] devicetree: Add DTS file to support the Nexus7 2013 (flo) device. 2016-02-05 19:21 ` [PATCH 2/2 v2] " John Stultz @ 2016-02-13 5:16 ` John Stultz 2016-02-13 6:06 ` Bjorn Andersson 2016-02-13 22:32 ` Linus Walleij 1 sibling, 1 reply; 8+ messages in thread From: John Stultz @ 2016-02-13 5:16 UTC (permalink / raw) To: lkml Cc: John Stultz, Rob Herring, Arnd Bergmann, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Andy Gross, Russell King, Vinay Simha BN, Bjorn Andersson, Stephen Boyd, linux-arm-msm@vger.kernel.org, devicetree On Fri, Feb 5, 2016 at 11:21 AM, John Stultz <john.stultz@linaro.org> wrote: > This patch adds a dts file to support the Nexus7 2013 > device. Its based off of the qcom-apq8064-ifc6410.dts > which is similar hardware. > > Also includes some comments and context folded in > from Vinay Simha BN <simhavcs@gmail.com> > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Arnd Bergmann <arnd.bergmann@linaro.org> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: Kumar Gala <galak@codeaurora.org> > Cc: Andy Gross <agross@codeaurora.org> > Cc: Russell King <linux@arm.linux.org.uk> > Cc: Vinay Simha BN <simhavcs@gmail.com> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Stephen Boyd <stephen.boyd@linaro.org> > Cc: linux-arm-msm@vger.kernel.org > Cc: devicetree@vger.kernel.org > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: John Stultz <john.stultz@linaro.org> > --- > v2: Fix dts/dtb typeo in makefile pointed out by Rob Ping? Is there someone I'm missing on the CC list for this? Or is there some special submission process? thanks -john ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2 v2] devicetree: Add DTS file to support the Nexus7 2013 (flo) device. 2016-02-13 5:16 ` John Stultz @ 2016-02-13 6:06 ` Bjorn Andersson 0 siblings, 0 replies; 8+ messages in thread From: Bjorn Andersson @ 2016-02-13 6:06 UTC (permalink / raw) To: John Stultz, Andy Gross Cc: lkml, Rob Herring, Arnd Bergmann, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King, Vinay Simha BN, Stephen Boyd, linux-arm-msm@vger.kernel.org, devicetree On Fri 12 Feb 21:16 PST 2016, John Stultz wrote: > On Fri, Feb 5, 2016 at 11:21 AM, John Stultz <john.stultz@linaro.org> wrote: > > This patch adds a dts file to support the Nexus7 2013 > > device. Its based off of the qcom-apq8064-ifc6410.dts > > which is similar hardware. > > > > Also includes some comments and context folded in > > from Vinay Simha BN <simhavcs@gmail.com> > > > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Arnd Bergmann <arnd.bergmann@linaro.org> > > Cc: Pawel Moll <pawel.moll@arm.com> > > Cc: Mark Rutland <mark.rutland@arm.com> > > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > > Cc: Kumar Gala <galak@codeaurora.org> > > Cc: Andy Gross <agross@codeaurora.org> > > Cc: Russell King <linux@arm.linux.org.uk> > > Cc: Vinay Simha BN <simhavcs@gmail.com> > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > > Cc: Stephen Boyd <stephen.boyd@linaro.org> > > Cc: linux-arm-msm@vger.kernel.org > > Cc: devicetree@vger.kernel.org > > Acked-by: Rob Herring <robh@kernel.org> > > Signed-off-by: John Stultz <john.stultz@linaro.org> > > --- > > v2: Fix dts/dtb typeo in makefile pointed out by Rob > > > Ping? Is there someone I'm missing on the CC list for this? Or is > there some special submission process? > You're doing it right, sorry for not looking at this earlier. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Andy can you apply these two patches, please. Regards, Bjorn ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2 v2] devicetree: Add DTS file to support the Nexus7 2013 (flo) device. 2016-02-05 19:21 ` [PATCH 2/2 v2] " John Stultz 2016-02-13 5:16 ` John Stultz @ 2016-02-13 22:32 ` Linus Walleij 1 sibling, 0 replies; 8+ messages in thread From: Linus Walleij @ 2016-02-13 22:32 UTC (permalink / raw) To: John Stultz, Andy Gross Cc: lkml, Rob Herring, Arnd Bergmann, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King, Vinay Simha BN, Bjorn Andersson, Stephen Boyd, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org On Fri, Feb 5, 2016 at 8:21 PM, John Stultz <john.stultz@linaro.org> wrote: > This patch adds a dts file to support the Nexus7 2013 > device. Its based off of the qcom-apq8064-ifc6410.dts > which is similar hardware. > > Also includes some comments and context folded in > from Vinay Simha BN <simhavcs@gmail.com> > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Arnd Bergmann <arnd.bergmann@linaro.org> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: Kumar Gala <galak@codeaurora.org> > Cc: Andy Gross <agross@codeaurora.org> > Cc: Russell King <linux@arm.linux.org.uk> > Cc: Vinay Simha BN <simhavcs@gmail.com> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Stephen Boyd <stephen.boyd@linaro.org> > Cc: linux-arm-msm@vger.kernel.org > Cc: devicetree@vger.kernel.org > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: John Stultz <john.stultz@linaro.org> > --- > v2: Fix dts/dtb typeo in makefile pointed out by Rob Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-02-13 22:32 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-05 18:06 [PATCH 1/2] devicetree: qcom-apq8064.dtsi: Add i2c3 address-cells and size-cells values John Stultz
2016-02-05 18:06 ` [PATCH 2/2] devicetree: Add DTS file to support the Nexus7 2013 (flo) device John Stultz
2016-02-05 19:01 ` Rob Herring
[not found] ` <CAL_JsqL1koD3OWM4-cqEOJUz-yuZuUeg1tmp6V39mPE0zrNPgg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-02-05 19:13 ` John Stultz
2016-02-05 19:21 ` [PATCH 2/2 v2] " John Stultz
2016-02-13 5:16 ` John Stultz
2016-02-13 6:06 ` Bjorn Andersson
2016-02-13 22:32 ` Linus Walleij
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).