devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>,
	Wills Wang <wills.wang-EMRzualFZlQ@public.gmane.org>,
	Daniel Schwierzeck
	<daniel.schwierzeck-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Alban Bedel <albeu-GANU6spQydw@public.gmane.org>,
	Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [RFC v5 05/15] MIPS: dts: qca: introduce AR9331 devicetree
Date: Tue,  9 Feb 2016 11:13:51 +0300	[thread overview]
Message-ID: <1455005641-7079-6-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1455005641-7079-1-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

This patch introduces devicetree for Atheros AR9331 SoC (AKA Hornet).
The AR9331 chip is a Wi-Fi System-On-Chip (WiSOC),
typically used in very cheap Access Points and Routers.

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Cc: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/mips/boot/dts/qca/ar9331.dtsi | 157 +++++++++++++++++++++++++++++++++++++
 1 file changed, 157 insertions(+)

diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
new file mode 100644
index 0000000..333c7ff
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -0,0 +1,157 @@
+#include <dt-bindings/clock/ath79-clk.h>
+
+/ {
+	compatible = "qca,ar9331";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips24Kc";
+			reg = <0>;
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "qca,ar7100-cpu-intc";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		qca,ddr-wb-channel-interrupts = <2>, <3>;
+		qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
+	};
+
+	ref: ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		ranges;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+
+		apb {
+			compatible = "simple-bus";
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			interrupt-parent = <&miscintc>;
+
+			ddr_ctrl: memory-controller@18000000 {
+				compatible = "qca,ar7240-ddr-controller";
+				reg = <0x18000000 0x100>;
+
+				#qca,ddr-wb-channel-cells = <1>;
+			};
+
+			uart: uart@18020000 {
+				compatible = "qca,ar9330-uart";
+				reg = <0x18020000 0x14>;
+
+				interrupts = <3>;
+
+				clocks = <&pll ATH79_CLK_UART>;
+				clock-names = "uart";
+
+				status = "disabled";
+			};
+
+			gpio: gpio@18040000 {
+				compatible = "qca,ar7100-gpio";
+				reg = <0x18040000 0x34>;
+				interrupts = <2>;
+
+				ngpios = <30>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				status = "disabled";
+			};
+
+			pll: pll-controller@18050000 {
+				compatible = "qca,ar9330-pll";
+				reg = <0x18050000 0x100>;
+
+				clocks = <&ref>;
+				clock-names = "ref";
+
+				#clock-cells = <1>;
+			};
+
+			miscintc: interrupt-controller@18060010 {
+				compatible = "qca,ar7240-misc-intc";
+				reg = <0x18060010 0x4>;
+
+				interrupt-parent = <&cpuintc>;
+				interrupts = <6>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			rst: reset-controller@1806001c {
+				compatible = "qca,ar7100-reset";
+				reg = <0x1806001c 0x4>;
+
+				#reset-cells = <1>;
+			};
+
+			usb: usb@1b000100 {
+				compatible = "qca,ar7100-ehci", "generic-ehci";
+				reg = <0x1b000100 0x100>;
+
+				interrupt-parent = <&cpuintc>;
+				interrupts = <3>;
+				resets = <&rst 5>;
+
+				has-transaction-translator;
+
+				phy-names = "usb";
+				phys = <&usb_phy>;
+
+				status = "disabled";
+			};
+
+			spi: spi@1f000000 {
+				compatible = "qca,ar7100-spi";
+				reg = <0x1f000000 0x10>;
+
+				clocks = <&pll ATH79_CLK_AHB>;
+				clock-names = "ahb";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+	};
+
+	usb_phy: usb-phy {
+		compatible = "qca,ar7100-usb-phy";
+
+		reset-names = "usb-phy", "usb-suspend-override";
+		resets = <&rst 4>, <&rst 3>;
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+};
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2016-02-09  8:13 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1455005641-7079-1-git-send-email-antonynpavlov@gmail.com>
2016-02-09  8:13 ` [RFC v5 01/15] WIP: clk: add Atheros AR933X SoCs clock driver Antony Pavlov
2016-02-09 11:05   ` Marek Vasut
     [not found]   ` <1455005641-7079-2-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-02-09 21:51     ` Alban
2016-02-11 12:50       ` Antony Pavlov
2016-02-12  2:21   ` Michael Turquette
     [not found] ` <1455005641-7079-1-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-02-09  8:13   ` [RFC v5 02/15] dt-bindings: clock: qca,ath79-pll: fix copy-paste typos Antony Pavlov
     [not found]     ` <1455005641-7079-3-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-02-09 11:05       ` Marek Vasut
2016-02-09 21:52       ` Alban
2016-02-12 14:52       ` Rob Herring
2016-02-09  8:13   ` Antony Pavlov [this message]
     [not found]     ` <1455005641-7079-6-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-02-09 11:12       ` [RFC v5 05/15] MIPS: dts: qca: introduce AR9331 devicetree Marek Vasut
2016-02-09  8:13   ` [RFC v5 06/15] MIPS: ath79: add initial support for TP-LINK MR3020 Antony Pavlov
     [not found]     ` <1455005641-7079-7-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-02-09 11:13       ` Marek Vasut
2016-02-09  8:13   ` [RFC v5 09/15] devicetree: add Dragino vendor id Antony Pavlov
2016-02-09  8:13   ` [RFC v5 10/15] MIPS: ath79: add initial support for Dragino MS14 (Dragino 2) Antony Pavlov
     [not found]     ` <1455005641-7079-11-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-02-09 11:16       ` Marek Vasut
2016-02-09  8:13   ` [RFC v5 11/15] devicetree: add Onion Corporation vendor id Antony Pavlov
2016-02-09  8:13   ` [RFC v5 12/15] MIPS: ath79: add initial support for Onion Omega Antony Pavlov
2016-02-09  8:13   ` [RFC v5 13/15] devicetree: add DPTechnics vendor id Antony Pavlov
     [not found]     ` <1455005641-7079-14-git-send-email-antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-02-12 14:53       ` Rob Herring
2016-02-09  8:14   ` [RFC v5 14/15] MIPS: ath79: add DPT-Module support Antony Pavlov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455005641-7079-6-git-send-email-antonynpavlov@gmail.com \
    --to=antonynpavlov-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=albeu-GANU6spQydw@public.gmane.org \
    --cc=daniel.schwierzeck-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org \
    --cc=linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
    --cc=marex-ynQEQJNshbs@public.gmane.org \
    --cc=wills.wang-EMRzualFZlQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).