[PATCH 2/3] mtd: nand: read (from DT) and store ECC algorithm

["Rafał Miłecki" <zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

This will allow drivers handle ECC properly.

Signed-off-by: Rafał Miłecki <zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 drivers/mtd/nand/nand_base.c | 6 +++++-
 include/linux/mtd/nand.h     | 1 +
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index f2c8ff3..ef977f3 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3979,7 +3979,7 @@ ident_done:
 static int nand_dt_init(struct nand_chip *chip)
 {
 	struct device_node *dn = nand_get_flash_node(chip);
-	int ecc_mode, ecc_strength, ecc_step;
+	int ecc_mode, ecc_algo, ecc_strength, ecc_step;
 
 	if (!dn)
 		return 0;
@@ -3991,6 +3991,7 @@ static int nand_dt_init(struct nand_chip *chip)
 		chip->bbt_options |= NAND_BBT_USE_FLASH;
 
 	ecc_mode = of_get_nand_ecc_mode(dn);
+	ecc_algo = of_get_nand_ecc_algo(dn);
 	ecc_strength = of_get_nand_ecc_strength(dn);
 	ecc_step = of_get_nand_ecc_step_size(dn);
 
@@ -4003,6 +4004,9 @@ static int nand_dt_init(struct nand_chip *chip)
 	if (ecc_mode >= 0)
 		chip->ecc.mode = ecc_mode;
 
+	if (ecc_algo >= 0)
+		chip->ecc.algo = ecc_algo;
+
 	if (ecc_strength >= 0)
 		chip->ecc.strength = ecc_strength;
 
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 25854d2..8deca1b 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -513,6 +513,7 @@ struct nand_hw_control {
  */
 struct nand_ecc_ctrl {
 	nand_ecc_modes_t mode;
+	enum nand_ecc_algo algo;
 	int steps;
 	int size;
 	int bytes;
-- 
1.8.4.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html