[PATCH v3 1/5] arm64: Broadcom Vulcan support

[Jayachandran C <jchandra-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>]

From: Zi Shen Lim <zlim-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>

Add a configuration option and a device tree for Broadcom's Vulcan
ARM64 processor. vulcan.dtsi has the on-chip blocks like the PCIe
controller, GICv3 with ITS, PMU, system timer and the pl011 UART.
vulcan-eval.dts has definitions for a basic evaluation board.

Vulcan's processor cores support the ARMv8.1 instruction set and
will use "brcm,vulcan" as the compatible property. The firmware
has PSCI 0.2 support for cpu wakeup.

Signed-off-by: Zi Shen Lim <zlim-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
[ updated and split dts - jchandra-dY08KVG/lbpWk0Htik3J/w@public.gmane.org ]
Signed-off-by: Jayachandran C <jchandra-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---

There is a minor update to this patch.

After some discussions here, it looks like it is necessary to increase the
PCI mem and mem64 ranges to support all the use cases. We are updating the
firmware to use these ranges as well.

Hope it is not too late to fix this, sorry for the late churn.

Thanks,
JC.

v2->v3:
 update ranges in the pci entry in vulcan.dtsi, changes are:
 IO: removed, since it is not supported
 MEM:   0x4800_0000-0x5000_0000 to 0x4000_0000-0x6000_0000
 MEM 64: 0x6_0000_0000-0x7_0000_0000 to 0x40_0000_0000-0x60_0000_0000

 arch/arm64/Kconfig.platforms                 |   5 +
 arch/arm64/boot/dts/broadcom/Makefile        |   1 +
 arch/arm64/boot/dts/broadcom/vulcan-eval.dts |  33 ++++++
 arch/arm64/boot/dts/broadcom/vulcan.dtsi     | 147 +++++++++++++++++++++++++++
 4 files changed, 186 insertions(+)
 create mode 100644 arch/arm64/boot/dts/broadcom/vulcan-eval.dts
 create mode 100644 arch/arm64/boot/dts/broadcom/vulcan.dtsi

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 21074f6..75e1bfe 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -131,6 +131,11 @@ config ARCH_VEXPRESS
 	  This enables support for the ARMv8 software model (Versatile
 	  Express).
 
+config ARCH_VULCAN
+	bool "Broadcom Vulcan SOC Family"
+	help
+	  This enables support for Broadcom Vulcan SoC Family
+
 config ARCH_XGENE
 	bool "AppliedMicro X-Gene SOC Family"
 	help
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index e21fe66..bec1f8b 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,4 +1,5 @@
 dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
+dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/broadcom/vulcan-eval.dts b/arch/arm64/boot/dts/broadcom/vulcan-eval.dts
new file mode 100644
index 0000000..9ee8d3d
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/vulcan-eval.dts
@@ -0,0 +1,33 @@
+/*
+ * dts file for Broadcom (BRCM) Vulcan Evaluation Platform
+ *
+ * Copyright (c) 2013-2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "vulcan.dtsi"
+
+/ {
+	model = "Broadcom Vulcan Eval Platform";
+	compatible = "brcm,vulcan-eval", "brcm,vulcan-soc";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x0 0x80000000>,  /* 2G @ 2G  */
+		      <0x00000008 0x80000000 0x0 0x80000000>;  /* 2G @ 34G */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/vulcan.dtsi b/arch/arm64/boot/dts/broadcom/vulcan.dtsi
new file mode 100644
index 0000000..85820e2
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/vulcan.dtsi
@@ -0,0 +1,147 @@
+/*
+ * dtsi file for Broadcom (BRCM) Vulcan processor
+ *
+ * Copyright (c) 2013-2016 Broadcom
+ * Author: Zi Shen Lim <zlim-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Broadcom Vulcan";
+	compatible = "brcm,vulcan-soc";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* just 4 cpus now, 128 needed in full config */
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,vulcan", "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,vulcan", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "brcm,vulcan", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "brcm,vulcan", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@400080000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		#redistributor-regions = <1>;
+		reg = <0x04 0x00080000 0x0 0x20000>,	/* GICD */
+		      <0x04 0x01000000 0x0 0x1000000>;	/* GICR */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gicits: gic-its@40010000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x04 0x00100000 0x0 0x20000>;	/* GIC ITS */
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; /* PMU overflow */
+	};
+
+	clk125mhz: uart_clk125mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk125mhz";
+	};
+
+	pci {
+		compatible = "pci-host-ecam-generic";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* ECAM at 0x3000_0000 - 0x4000_0000 */
+		reg = <0x0 0x30000000  0x0 0x10000000>;
+		reg-names = "PCI ECAM";
+
+		/*
+		 * PCI ranges:
+		 *   IO		no supported
+		 *   MEM        0x4000_0000 - 0x6000_0000
+		 *   MEM64 pref 0x40_0000_0000 - 0x60_0000_0000
+		 */
+		ranges =
+		  <0x02000000    0 0x40000000    0 0x40000000    0 0x20000000
+		   0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map =
+		      /* addr  pin  ic   icaddr  icintr */
+			<0 0 0  1  &gic   0 0    GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+			 0 0 0  2  &gic   0 0    GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+			 0 0 0  3  &gic   0 0    GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+			 0 0 0  4  &gic   0 0    GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		msi-parent = <&gicits>;
+		dma-coherent;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		uart0: serial@402020000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x04 0x02020000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk125mhz>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html