From mboxrd@z Thu Jan 1 00:00:00 1970 From: Carlo Caione Subject: [PATCH 4/4] documentation: Fix pinctrl documentation for Meson8 / Meson8b Date: Tue, 1 Mar 2016 23:04:36 +0100 Message-ID: <1456869876-19320-5-git-send-email-carlo@caione.org> References: <1456869876-19320-1-git-send-email-carlo@caione.org> Return-path: In-Reply-To: <1456869876-19320-1-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, b.galvani-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-meson-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-6IF/jdPJHihWk0Htik3J/w@public.gmane.org, arnd-r2nGTMty4D4@public.gmane.org Cc: Carlo Caione List-Id: devicetree@vger.kernel.org From: Carlo Caione Fix pin controller documentation with the new compatibles. Signed-off-by: Carlo Caione --- .../devicetree/bindings/pinctrl/meson,pinctrl.txt | 36 +++------------------- 1 file changed, 5 insertions(+), 31 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt index 3f6a524..51a8ebb 100644 --- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt @@ -1,13 +1,14 @@ == Amlogic Meson pinmux controller == Required properties for the root node: - - compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl" + - compatible: "amlogic,meson8-cbus-pinctrl", "amlogic,meson8b-cbus-pinctrl", + "amlogic,meson8-aobus-pinctrl" or "amlogic,meson8b-aobus-pinctrl" - reg: address and size of registers controlling irq functionality === GPIO sub-nodes === -The 2 power domains of the controller (regular and always-on) are -represented as sub-nodes and each of them acts as a GPIO controller. +Each power domain of the controller (regular and always-on) is +represented as a sub-node and it acts as a GPIO controller. Required properties for sub-nodes are: - reg: should contain address and size for mux, pull-enable, pull and @@ -18,10 +19,6 @@ Required properties for sub-nodes are: - gpio-controller: identifies the node as a gpio controller - #gpio-cells: must be 2 -Valid sub-node names are: - - "banks" for the regular domain - - "ao-bank" for the always-on domain - === Other sub-nodes === Child nodes without the "gpio-controller" represent some desired @@ -45,7 +42,7 @@ pinctrl-bindings.txt === Example === pinctrl: pinctrl@c1109880 { - compatible = "amlogic,meson8-pinctrl"; + compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0xc1109880 0x10>; #address-cells = <1>; #size-cells = <1>; @@ -61,15 +58,6 @@ pinctrl-bindings.txt #gpio-cells = <2>; }; - gpio_ao: ao-bank@c1108030 { - reg = <0xc8100014 0x4>, - <0xc810002c 0x4>, - <0xc8100024 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - nand { mux { groups = "nand_io", "nand_io_ce0", "nand_io_ce1", @@ -79,18 +67,4 @@ pinctrl-bindings.txt function = "nand"; }; }; - - uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a", - "uart_cts_ao_a", "uart_rts_ao_a"; - function = "uart_ao"; - }; - - conf { - pins = "GPIOAO_0", "GPIOAO_1", - "GPIOAO_2", "GPIOAO_3"; - bias-disable; - }; - }; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html