From: Peter Chen <peter.chen-3arQi8VN3Tc@public.gmane.org>
To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
mail-APzI5cXaD1zVlRWJc41N0YvC60bnQu0Y@public.gmane.org,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org,
festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Subject: [PATCH 3/3] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property
Date: Thu, 3 Mar 2016 18:01:16 +0800 [thread overview]
Message-ID: <1456999276-6315-4-git-send-email-peter.chen@nxp.com> (raw)
In-Reply-To: <1456999276-6315-1-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>
From: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
The current dts describes USB HUB's property at USB controller's
entry, it is improper. The USB HUB should be the child node
under USB controller.
Signed-off-by: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
arch/arm/boot/dts/imx6qdl-udoo.dtsi | 35 ++++++++++++++---------------------
1 file changed, 14 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 1211da8..d8a4274 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -9,6 +9,8 @@
*
*/
+#include <dt-bindings/gpio/gpio.h>
+
/ {
chosen {
stdout-path = &uart2;
@@ -17,23 +19,6 @@
memory {
reg = <0x10000000 0x40000000>;
};
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb_h1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
- gpio = <&gpio7 12 0>;
- };
- };
};
&fec {
@@ -119,11 +104,19 @@
};
&usbh1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh>;
- vbus-supply = <®_usb_h1_vbus>;
- clocks = <&clks 201>;
status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hub: usb2415@01 {
+ compatible = "usbxxxx,xxxx";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ reset-duration-us = <3000>;
+ };
};
&usdhc3 {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-03-03 10:01 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-03 10:01 [PATCH 0/3] Add power sequence for hard-wired USB devices Peter Chen
[not found] ` <1456999276-6315-1-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>
2016-03-03 10:01 ` [PATCH 1/3] usb: core: add power sequence for " Peter Chen
[not found] ` <1456999276-6315-2-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>
2016-03-03 18:31 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1603031326310.1380-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2016-03-04 2:07 ` Peter Chen
2016-03-03 20:54 ` Rob Herring
[not found] ` <CAL_JsqLYHzb0ABYN_P9ZOEorT6otvn_BPNzuCFhoqwa5M4y-hw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-03-04 2:02 ` Peter Chen
[not found] ` <20160304020242.GB30272-Fb7DQEYuewWctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2016-03-04 2:23 ` Andrew Lunn
[not found] ` <20160304022305.GB20597-g2DYL2Zd6BY@public.gmane.org>
2016-03-04 2:37 ` Peter Chen
[not found] ` <20160304023750.GF30272-Fb7DQEYuewWctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2016-03-05 4:28 ` Rob Herring
2016-03-05 8:33 ` Peter Chen
[not found] ` <20160305083347.GA28858-Fb7DQEYuewWctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2016-03-05 14:10 ` Andrew Lunn
[not found] ` <20160305141011.GA28343-g2DYL2Zd6BY@public.gmane.org>
2016-03-14 10:42 ` Peter Chen
[not found] ` <20160314104229.GA2131-Fb7DQEYuewWctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2016-04-05 9:35 ` Peter Chen
2016-03-03 10:01 ` [PATCH 2/3] usb: chipidea: host: let the hcd know's parent device node Peter Chen
[not found] ` <1456999276-6315-3-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>
2016-03-03 14:42 ` Andrew Lunn
[not found] ` <20160303144247.GH15541-g2DYL2Zd6BY@public.gmane.org>
2016-03-04 1:53 ` Peter Chen
[not found] ` <20160304015326.GA30272-Fb7DQEYuewWctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2016-03-04 2:17 ` Andrew Lunn
[not found] ` <20160304021730.GA20597-g2DYL2Zd6BY@public.gmane.org>
2016-03-04 2:32 ` Peter Chen
2016-03-03 10:01 ` Peter Chen [this message]
[not found] ` <1456999276-6315-4-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>
2016-03-03 22:30 ` [PATCH 3/3] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property Maciej S. Szmigiero
[not found] ` <56D8BB1D.6040108-APzI5cXaD1zVlRWJc41N0YvC60bnQu0Y@public.gmane.org>
2016-03-04 2:04 ` Peter Chen
-- strict thread matches above, loose matches on Subject: below --
2015-12-08 1:37 [PATCH 0/3] USB: add generic onboard USB HUB driver Peter Chen
[not found] ` <1449538670-7954-1-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-12-08 1:37 ` [PATCH 3/3] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456999276-6315-4-git-send-email-peter.chen@nxp.com \
--to=peter.chen-3arqi8vn3tc@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mail-APzI5cXaD1zVlRWJc41N0YvC60bnQu0Y@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org \
--cc=troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).