From: Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Lorenzo Pieralisi
<lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org>,
Liviu Dudau <liviu.dudau-5wv7dgnIgG8@public.gmane.org>
Subject: [PATCH 1/2] arm64: dts: juno/vexpress: fix node name unit-address presence warnings
Date: Mon, 7 Mar 2016 12:12:14 +0000 [thread overview]
Message-ID: <1457352735-24453-1-git-send-email-sudeep.holla@arm.com> (raw)
Commit fa38a82096a1 ("scripts/dtc: Update to upstream version
53bf130b1cdd") added warnings on node name unit-address presence/absence
mismatch in device trees.
This patch fixes those warning on all the juno/vexpress platforms where
unit-address is present in node name while the reg/ranges property is
not present.
Signed-off-by: Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org>
---
arch/arm64/boot/dts/arm/foundation-v8.dtsi | 2 +-
arch/arm64/boot/dts/arm/juno-base.dtsi | 14 +++++-----
arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 30 +++++++++++-----------
arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts | 2 +-
arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 14 +++++-----
.../boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 10 ++++----
6 files changed, 36 insertions(+), 36 deletions(-)
Hi Rob,
I am not sure if the intention of commit fa38a82096a1 is to fix even
existing warnings or not. I saw warning with today's -next branch.
Let me know.
Regards,
Sudeep
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 9314f3943269..ba03c934a861 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -89,7 +89,7 @@
<0 63 4>;
};
- smb {
+ smb@0,08000000 {
compatible = "arm,vexpress,v2m-p1", "simple-bus";
arm,v2m-memory-map = "rs1";
#address-cells = <2>; /* SMB chipselect number and offset */
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 4b6172b0f2cb..3841e82fa6f8 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -105,13 +105,13 @@
clocks {
compatible = "arm,scpi-clocks";
- scpi_dvfs: scpi_clocks@0 {
+ scpi_dvfs: scpi-clocks-0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>, <1>, <2>;
clock-output-names = "atlclk", "aplclk","gpuclk";
};
- scpi_clk: scpi_clocks@3 {
+ scpi_clk: scpi-clocks-1 {
compatible = "arm,scpi-variable-clocks";
#clock-cells = <1>;
clock-indices = <3>;
@@ -154,7 +154,7 @@
clock-names = "pxlclk";
port {
- hdlcd1_output: endpoint@0 {
+ hdlcd1_output: endpoint0 {
remote-endpoint = <&tda998x_1_input>;
};
};
@@ -168,7 +168,7 @@
clock-names = "pxlclk";
port {
- hdlcd0_output: endpoint@0 {
+ hdlcd0_output: endpoint0 {
remote-endpoint = <&tda998x_0_input>;
};
};
@@ -196,7 +196,7 @@
compatible = "nxp,tda998x";
reg = <0x70>;
port {
- tda998x_0_input: endpoint@0 {
+ tda998x_0_input: endpoint0 {
remote-endpoint = <&hdlcd0_output>;
};
};
@@ -206,7 +206,7 @@
compatible = "nxp,tda998x";
reg = <0x71>;
port {
- tda998x_1_input: endpoint@0 {
+ tda998x_1_input: endpoint0 {
remote-endpoint = <&hdlcd1_output>;
};
};
@@ -243,7 +243,7 @@
<0x00000008 0x80000000 0x1 0x80000000>;
};
- smb {
+ smb@0,08000000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 413f1b9ebcd4..3d4af126df6e 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -46,7 +46,7 @@
arm,vexpress,site = <0>;
arm,v2m-memory-map = "rs1";
- mb_fixed_3v3: fixedregulator@0 {
+ mb_fixed_3v3: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "MCC_SB_3V3";
regulator-min-microvolt = <3300000>;
@@ -59,42 +59,42 @@
#address-cells = <1>;
#size-cells = <0>;
- button@1 {
+ button1 {
debounce_interval = <50>;
wakeup-source;
linux,code = <116>;
label = "POWER";
gpios = <&iofpga_gpio0 0 0x4>;
};
- button@2 {
+ button2 {
debounce_interval = <50>;
wakeup-source;
linux,code = <102>;
label = "HOME";
gpios = <&iofpga_gpio0 1 0x4>;
};
- button@3 {
+ button3 {
debounce_interval = <50>;
wakeup-source;
linux,code = <152>;
label = "RLOCK";
gpios = <&iofpga_gpio0 2 0x4>;
};
- button@4 {
+ button4 {
debounce_interval = <50>;
wakeup-source;
linux,code = <115>;
label = "VOL+";
gpios = <&iofpga_gpio0 3 0x4>;
};
- button@5 {
+ button5 {
debounce_interval = <50>;
wakeup-source;
linux,code = <114>;
label = "VOL-";
gpios = <&iofpga_gpio0 4 0x4>;
};
- button@6 {
+ button6 {
debounce_interval = <50>;
wakeup-source;
linux,code = <99>;
@@ -159,7 +159,7 @@
compatible = "syscon", "simple-mfd";
reg = <0x010000 0x1000>;
- led@08.0 {
+ led0 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x01>;
@@ -167,7 +167,7 @@
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led1 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x02>;
@@ -175,7 +175,7 @@
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led2 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x04>;
@@ -183,7 +183,7 @@
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led3 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x08>;
@@ -191,7 +191,7 @@
linux,default-trigger = "cpu1";
default-state = "off";
};
- led@08.4 {
+ led4 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x10>;
@@ -199,7 +199,7 @@
linux,default-trigger = "cpu2";
default-state = "off";
};
- led@08.5 {
+ led5 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x20>;
@@ -207,14 +207,14 @@
linux,default-trigger = "cpu3";
default-state = "off";
};
- led@08.6 {
+ led6 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x40>;
label = "vexpress:6";
default-state = "off";
};
- led@08.7 {
+ led7 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x80>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index 20addabbd127..0d0df795809c 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -104,7 +104,7 @@
<0 63 4>;
};
- smb {
+ smb@0,08000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index 88a7583ed7a7..09d97e1a8948 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -226,7 +226,7 @@
};
};
- v2m_fixed_3v3: fixedregulator@0 {
+ v2m_fixed_3v3: fixedregulator {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
@@ -238,7 +238,7 @@
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- v2m_oscclk1: osc@1 {
+ v2m_oscclk1: osc {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
@@ -247,27 +247,27 @@
clock-output-names = "v2m:oscclk1";
};
- reset@0 {
+ reset {
compatible = "arm,vexpress-reset";
arm,vexpress-sysreg,func = <5 0>;
};
- muxfpga@0 {
+ muxfpga {
compatible = "arm,vexpress-muxfpga";
arm,vexpress-sysreg,func = <7 0>;
};
- shutdown@0 {
+ shutdown {
compatible = "arm,vexpress-shutdown";
arm,vexpress-sysreg,func = <8 0>;
};
- reboot@0 {
+ reboot {
compatible = "arm,vexpress-reboot";
arm,vexpress-sysreg,func = <9 0>;
};
- dvimode@0 {
+ dvimode {
compatible = "arm,vexpress-dvimode";
arm,vexpress-sysreg,func = <11 0>;
};
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index bb3c26d1154d..00024be0c9b0 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -93,7 +93,7 @@
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- smbclk: osc@4 {
+ smbclk: osc4 {
/* SMC clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
@@ -102,7 +102,7 @@
clock-output-names = "smclk";
};
- volt@0 {
+ volt0 {
/* VIO to expansion board above */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
@@ -112,7 +112,7 @@
regulator-always-on;
};
- volt@1 {
+ volt1 {
/* 12V from power connector J6 */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
@@ -120,7 +120,7 @@
regulator-always-on;
};
- temp@0 {
+ temp0 {
/* FPGA temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
@@ -128,7 +128,7 @@
};
};
- smb {
+ smb@0,08000000 {
compatible = "simple-bus";
#address-cells = <2>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-03-07 12:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-07 12:12 Sudeep Holla [this message]
[not found] ` <1457352735-24453-1-git-send-email-sudeep.holla-5wv7dgnIgG8@public.gmane.org>
2016-03-07 12:12 ` [PATCH 2/2] ARM: dts: vexpress: fix node name unit-address presence warnings Sudeep Holla
2016-03-17 21:44 ` [PATCH 1/2] arm64: dts: juno/vexpress: " Rob Herring
[not found] ` <CAL_JsqJeeZ58at95gSRwOMnce_DjDsXVRYH_bMKaX=uDHtZAAA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-03-18 10:32 ` Jon Medhurst (Tixy)
[not found] ` <1458297136.2812.7.camel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-03-18 13:09 ` Rob Herring
[not found] ` <CAL_JsqJEA9rVOzD=wC8TJnzm+ou=mnRLrkNU2zgrH402=pm3Tw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-03-18 14:15 ` Jon Medhurst (Tixy)
[not found] ` <1458310539.2812.16.camel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-03-18 14:52 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457352735-24453-1-git-send-email-sudeep.holla@arm.com \
--to=sudeep.holla-5wv7dgnigg8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=liviu.dudau-5wv7dgnIgG8@public.gmane.org \
--cc=lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).