From: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
john.stultz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org
Cc: mark.rutland-5wv7dgnIgG8@public.gmane.org,
jwerner-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
richard-/L3Ra7n9ekc@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org,
Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
jun.nie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org
Subject: [PATCH v5 3/4] ARM: dts: rockchip: add syscon-reboot-mode DT node
Date: Tue, 8 Mar 2016 20:25:21 +0800 [thread overview]
Message-ID: <1457439921-8233-1-git-send-email-andy.yan@rock-chips.com> (raw)
In-Reply-To: <1457439716-8084-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Rockchip platform use a SYSCON mapped register store
the reboot mode magic value for bootloader to use when
system reboot. So add syscon-reboot-mode driver DT node
for rk3xxx,rk3036, rk3288 platform
Reviewed-by: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
Changes in v5: None
Changes in v4: None
Changes in v3:
- descirbe all reboot mode as property instead of subnode
- add rk3036 support
Changes in v2:
- make this node as a subnode of PMU
Changes in v1:
- correct the maskrom magic number
- use macro defined in rockchip_boot-mode.h for reboot-mode DT node
arch/arm/boot/dts/rk3036.dtsi | 11 ++++++++++-
arch/arm/boot/dts/rk3288.dtsi | 10 ++++++++++
arch/arm/boot/dts/rk3xxx.dtsi | 12 +++++++++++-
include/dt-bindings/soc/rockchip_boot-mode.h | 15 +++++++++++++++
4 files changed, 46 insertions(+), 2 deletions(-)
create mode 100644 include/dt-bindings/soc/rockchip_boot-mode.h
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index b9567c1..4011c2e 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -43,6 +43,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3036-cru.h>
+#include <dt-bindings/soc/rockchip_boot-mode.h>
#include "skeleton.dtsi"
/ {
@@ -261,8 +262,16 @@
};
grf: syscon@20008000 {
- compatible = "rockchip,rk3036-grf", "syscon";
+ compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
reg = <0x20008000 0x1000>;
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x1d8>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_BL_DOWNLOAD>;
+ };
};
acodec: acodec-ana@20030000 {
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 8ac49f3..9aa7d73 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -45,6 +45,7 @@
#include <dt-bindings/clock/rk3288-cru.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/power/rk3288-power.h>
+#include <dt-bindings/soc/rockchip_boot-mode.h>
#include "skeleton.dtsi"
/ {
@@ -713,6 +714,15 @@
clocks = <&cru ACLK_GPU>;
};
};
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x94>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_BL_DOWNLOAD>;
+ };
};
sgrf: syscon@ff740000 {
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 99eeea7..f8f661f 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -43,6 +43,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/rockchip_boot-mode.h>
#include "skeleton.dtsi"
/ {
@@ -243,8 +244,17 @@
};
pmu: pmu@20004000 {
- compatible = "rockchip,rk3066-pmu", "syscon";
+ compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
reg = <0x20004000 0x100>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x40>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_BL_DOWNLOAD>;
+ };
};
grf: grf@20008000 {
diff --git a/include/dt-bindings/soc/rockchip_boot-mode.h b/include/dt-bindings/soc/rockchip_boot-mode.h
new file mode 100644
index 0000000..62cfab3
--- /dev/null
+++ b/include/dt-bindings/soc/rockchip_boot-mode.h
@@ -0,0 +1,15 @@
+#ifndef __ROCKCHIP_BOOT_MODE_H
+#define __ROCKCHIP_BOOT_MODE_H
+
+/*high 24 bits is tag, low 8 bits is type*/
+#define REBOOT_FLAG 0x5242C300
+/* normal boot */
+#define BOOT_NORMAL (REBOOT_FLAG + 0)
+/* enter bootloader rockusb mode */
+#define BOOT_BL_DOWNLOAD (REBOOT_FLAG + 1)
+/* enter recovery */
+#define BOOT_RECOVERY (REBOOT_FLAG + 3)
+ /* enter fastboot mode */
+#define BOOT_FASTBOOT (REBOOT_FLAG + 9)
+
+#endif
--
1.9.1
next prev parent reply other threads:[~2016-03-08 12:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-08 12:21 [PATCH v5 0/4] add reboot mode driver Andy Yan
2016-03-08 12:24 ` [PATCH v5 2/4] power: reset: " Andy Yan
[not found] ` <1457439716-8084-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-03-08 12:23 ` [PATCH v5 1/4] dt-bindings: power: reset: add document for reboot-mode driver Andy Yan
2016-03-17 15:52 ` Rob Herring
2016-03-18 8:19 ` Andy Yan
2016-03-18 8:43 ` Andy Yan
2016-03-18 9:07 ` Heiko Stübner
[not found] ` <56EBBFB1.6000808-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-03-18 13:14 ` Rob Herring
2016-03-08 12:25 ` Andy Yan [this message]
2016-03-08 12:26 ` [PATCH v5 4/4] ARM64: dts: rockchip: add syscon-reboot-mode DT node Andy Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457439921-8233-1-git-send-email-andy.yan@rock-chips.com \
--to=andy.yan-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
--cc=alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=john.stultz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=jun.nie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=jwerner-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=richard-/L3Ra7n9ekc@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
--cc=wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).