From: Sebastian Reichel <sre@kernel.org>
To: "Sebastian Reichel" <sre@kernel.org>,
"Tony Lindgren" <tony@atomide.com>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Aaro Koskinen" <aaro.koskinen@iki.fi>
Cc: "Rob Herring" <robh+dt@kernel.org>,
"Pawel Moll" <pawel.moll@arm.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
"Kumar Gala" <galak@codeaurora.org>,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Filip Matijević" <filip.matijevic.pz@gmail.com>
Subject: [PATCH 7/7] ARM: dts: N9/N950: Add support for accelerometer
Date: Sun, 13 Mar 2016 01:06:20 +0100 [thread overview]
Message-ID: <1457827580-16919-8-git-send-email-sre@kernel.org> (raw)
In-Reply-To: <1457827580-16919-1-git-send-email-sre@kernel.org>
From: Filip Matijević <filip.matijevic.pz@gmail.com>
Signed-off-by: Filip Matijević <filip.matijevic.pz@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
arch/arm/boot/dts/omap3-n9.dts | 14 ++++++++++
arch/arm/boot/dts/omap3-n950-n9.dtsi | 54 ++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/omap3-n950.dts | 14 ++++++++++
3 files changed, 82 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index f2e213931e09..32414707cc69 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -53,3 +53,17 @@
};
};
};
+
+&lis302 {
+ st,axis-x = <1>; /* LIS3_DEV_X */
+ st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
+ st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
+
+ st,min-limit-x = <(-46)>;
+ st,min-limit-y = <3>;
+ st,min-limit-z = <3>;
+
+ st,max-limit-x = <(-3)>;
+ st,max-limit-y = <46>;
+ st,max-limit-z = <46>;
+};
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 38d2d756acdd..22a7e8f7357c 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -53,6 +53,13 @@
};
&omap3_pmx_core {
+ accelerator_pins: pinmux_accelerator_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4) /* mcspi2_somi.gpio_180 -> LIS302 INT1 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4) /* mcspi2_cs0.gpio_181 -> LIS302 INT2 */
+ >;
+ };
+
debug_leds: pinmux_debug_led_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4) /* dss_data22.gpio_92 */
@@ -189,6 +196,53 @@
&i2c3 {
clock-frequency = <400000>;
+
+ lis302: lis302@1d {
+ compatible = "st,lis3lv02d";
+ reg = <0x1d>;
+
+ Vdd-supply = <&vaux1>;
+ Vdd_IO-supply = <&vio>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&accelerator_pins>;
+
+ interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
+
+ /* click flags */
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+
+ /* Limits are 0.5g * value */
+ st,click-threshold-x = <8>;
+ st,click-threshold-y = <8>;
+ st,click-threshold-z = <10>;
+
+ /* Click must be longer than time limit */
+ st,click-time-limit = <9>;
+
+ /* Kind of debounce filter */
+ st,click-latency = <50>;
+
+ st,wakeup-x-hi;
+ st,wakeup-y-hi;
+ st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
+
+ st,wakeup2-z-hi;
+ st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */
+
+ st,highpass-cutoff-hz = <2>;
+
+ /* Interrupt line 1 for thresholds */
+ st,irq1-ff-wu-1;
+ st,irq1-ff-wu-2;
+ /* Interrupt line 2 for click detection */
+ st,irq2-click;
+
+ st,wu-duration-1 = <8>;
+ st,wu-duration-2 = <8>;
+ };
};
&mmc1 {
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index daa17d20ccf5..ff9544cae5af 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -138,3 +138,17 @@
MATRIX_KEY(0x07, 0x07, KEY_R)
>;
};
+
+&lis302 {
+ st,axis-x = <(-2)>; /* LIS3_INV_DEV_Y */
+ st,axis-y = <(-1)>; /* LIS3_INV_DEV_X */
+ st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
+
+ st,min-limit-x = <(-32)>;
+ st,min-limit-y = <3>;
+ st,min-limit-z = <3>;
+
+ st,max-limit-x = <(-3)>;
+ st,max-limit-y = <32>;
+ st,max-limit-z = <32>;
+};
--
2.7.0
next prev parent reply other threads:[~2016-03-13 0:06 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-13 0:06 [PATCH 0/7] Nokia N9/N950 misc. DT patches Sebastian Reichel
2016-03-13 0:06 ` [PATCH 1/7] ARM: dts: n9/n950: regulator configuration Sebastian Reichel
2016-03-13 0:06 ` [PATCH 2/7] ARM: dts: OMAP3-N950: Add Keypad Matrix Sebastian Reichel
2016-03-13 0:06 ` [PATCH 3/7] ARM: dts: OMAP3-N950: Add Vibrator Sebastian Reichel
2016-03-13 0:06 ` [PATCH 4/7] ARM: dts: Enable N950 keyboard sleep leds by default Sebastian Reichel
[not found] ` <1457827580-16919-5-git-send-email-sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-03-29 10:51 ` Pavel Machek
2016-03-29 14:52 ` Sebastian Reichel
2016-03-29 17:54 ` Pavel Machek
2016-03-30 19:35 ` Tony Lindgren
2016-03-31 0:48 ` Sebastian Reichel
2016-04-01 12:45 ` Pavel Machek
2016-04-01 18:32 ` Tony Lindgren
2016-04-02 6:47 ` Pavel Machek
2016-04-12 21:02 ` Tony Lindgren
[not found] ` <1457827580-16919-1-git-send-email-sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-03-13 0:06 ` Sebastian Reichel
2016-03-13 0:06 ` [PATCH 5/7] ARM: dts: OMAP3-N950: Add Keypad Slide Switch Sebastian Reichel
2016-03-13 0:06 ` [PATCH 6/7] ARM: dts: N9/N950: Add support for 1GHz CPU clock Sebastian Reichel
2016-03-13 0:06 ` Sebastian Reichel [this message]
2016-03-29 10:53 ` [PATCH 7/7] ARM: dts: N9/N950: Add support for accelerometer Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457827580-16919-8-git-send-email-sre@kernel.org \
--to=sre@kernel.org \
--cc=aaro.koskinen@iki.fi \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=filip.matijevic.pz@gmail.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).