[PATCH v2 06/18] MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: use "ref" for reference clock name

[PATCH v2 06/18] MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: use "ref" for reference clock name

[Antony Pavlov]

Current ath79 clock.c code does not read reference clock and
pll setup from devicetree. The ar724x_clocks_init() function
recreates the clocks from scratch so devicetree clock
information is dropped. After adding the code which picked up
reference clock from devicetree I have found
that kernel does not boot anymore. The SPI and UART drivers
can't get clk; here are the bootlog error messages:

    of_serial: probe of 18020000.uart failed with error -22
    ath79-spi: probe of 1f000000.spi failed with error -22

The problem is that clock code assumes that reference clock
name is "ref" but current dts-file uses another name: "oscillator".

This patch fixes the problem by changing external oscillator
dt node name to "ref".

Please note that there is an alternative solution for the problem:

    > --- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
    > +++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
    > @@ -16,6 +16,7 @@
    >
    >         extosc: oscillator {
    >                 compatible = "fixed-clock";
    > +               clock-output-names = "ref";
    >                 #clock-cells = <0>;
    >                 clock-frequency = <40000000>;
    >         };

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Alban Bedel <albeu@free.fr>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
---
 arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
index eb632a2..3c3b7ce 100644
--- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -14,7 +14,7 @@
 		reg = <0x0 0x2000000>;
 	};
 
-	extosc: oscillator {
+	extosc: ref {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <40000000>;
-- 
2.7.0

[PATCH v2 07/18] MIPS: ath79: introduce <dt-bindings/clock/ath79-clk.h>

[Antony Pavlov]

The include/dt-bindings/clock/ath79-clk.h header file
is introduced so we can use symbolic identifiers for SoC clocks.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
 arch/mips/ath79/clock.c               | 33 +++++++++++++++++----------------
 arch/mips/boot/dts/qca/ar9132.dtsi    |  8 +++++---
 include/dt-bindings/clock/ath79-clk.h | 19 +++++++++++++++++++
 3 files changed, 41 insertions(+), 19 deletions(-)

diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index 618dfd7..c3a94ea 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -18,6 +18,7 @@
 #include <linux/clk.h>
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
+#include <dt-bindings/clock/ath79-clk.h>
 
 #include <asm/div64.h>
 
@@ -28,7 +29,7 @@
 #define AR71XX_BASE_FREQ	40000000
 #define AR724X_BASE_FREQ	40000000
 
-static struct clk *clks[3];
+static struct clk *clks[ATH79_CLK_END];
 static struct clk_onecell_data clk_data = {
 	.clks = clks,
 	.clk_num = ARRAY_SIZE(clks),
@@ -78,9 +79,9 @@ static void __init ar71xx_clocks_init(void)
 	ahb_rate = cpu_rate / div;
 
 	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
 
 	clk_add_alias("wdt", NULL, "ahb", NULL);
 	clk_add_alias("uart", NULL, "ahb", NULL);
@@ -114,9 +115,9 @@ static void __init ar724x_clocks_init(void)
 	ahb_rate = cpu_rate / div;
 
 	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
 
 	clk_add_alias("wdt", NULL, "ahb", NULL);
 	clk_add_alias("uart", NULL, "ahb", NULL);
@@ -176,9 +177,9 @@ static void __init ar933x_clocks_init(void)
 	}
 
 	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
 
 	clk_add_alias("wdt", NULL, "ahb", NULL);
 	clk_add_alias("uart", NULL, "ref", NULL);
@@ -310,9 +311,9 @@ static void __init ar934x_clocks_init(void)
 		ahb_rate = cpu_pll / (postdiv + 1);
 
 	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
 
 	clk_add_alias("wdt", NULL, "ref", NULL);
 	clk_add_alias("uart", NULL, "ref", NULL);
@@ -397,9 +398,9 @@ static void __init qca955x_clocks_init(void)
 		ahb_rate = cpu_pll / (postdiv + 1);
 
 	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
 
 	clk_add_alias("wdt", NULL, "ref", NULL);
 	clk_add_alias("uart", NULL, "ref", NULL);
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index 3bff63b..2f9a3ee 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/clock/ath79-clk.h>
+
 / {
 	compatible = "qca,ar9132";
 
@@ -57,7 +59,7 @@
 				reg = <0x18020000 0x20>;
 				interrupts = <3>;
 
-				clocks = <&pll 2>;
+				clocks = <&pll ATH79_CLK_AHB>;
 				clock-names = "uart";
 
 				reg-io-width = <4>;
@@ -100,7 +102,7 @@
 
 				interrupts = <4>;
 
-				clocks = <&pll 2>;
+				clocks = <&pll ATH79_CLK_AHB>;
 				clock-names = "wdt";
 			};
 
@@ -144,7 +146,7 @@
 			compatible = "qca,ar9132-spi", "qca,ar7100-spi";
 			reg = <0x1f000000 0x10>;
 
-			clocks = <&pll 2>;
+			clocks = <&pll ATH79_CLK_AHB>;
 			clock-names = "ahb";
 
 			status = "disabled";
diff --git a/include/dt-bindings/clock/ath79-clk.h b/include/dt-bindings/clock/ath79-clk.h
new file mode 100644
index 0000000..27359ad
--- /dev/null
+++ b/include/dt-bindings/clock/ath79-clk.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2014, 2016 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_ATH79_CLK_H
+#define __DT_BINDINGS_ATH79_CLK_H
+
+#define ATH79_CLK_CPU		0
+#define ATH79_CLK_DDR		1
+#define ATH79_CLK_AHB		2
+
+#define ATH79_CLK_END		3
+
+#endif /* __DT_BINDINGS_ATH79_CLK_H */
-- 
2.7.0

[PATCH v2 08/18] MIPS: ath79: update devicetree clock support for AR9132

[Antony Pavlov]

Current ath79 clock.c code does not read reference clock and
pll setup from devicetree. E.g. you can set any clock rate value
in board DTS but it will have no effect on the real clk calculation.

This patch fixes some AR9132 devicetree clock support defects:

  * clk initialization function ath79_clocks_init_dt_ng()
    is introduced; it actually gets pll block base register
    address and reference clock from devicetree;
  * pll register parsing code is moved to the separate
    ar724x_clk_init() function; this function
    can be called from platform code or from devicetree code.

Also mips_hpt_frequency value is set from dt, so the appropriate
clock parameter is added to the cpu@0 devicetree node.

The same approach can be used for adding AR9331 devicetree support.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
---
 arch/mips/ath79/clock.c            | 104 ++++++++++++++++++++++++++-----------
 arch/mips/ath79/setup.c            |  36 +++++++++++++
 arch/mips/boot/dts/qca/ar9132.dtsi |   1 +
 3 files changed, 112 insertions(+), 29 deletions(-)

diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index c3a94ea..79fb8b4 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -18,6 +18,8 @@
 #include <linux/clk.h>
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <dt-bindings/clock/ath79-clk.h>
 
 #include <asm/div64.h>
@@ -25,6 +27,7 @@
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
 #include "common.h"
+#include "machtypes.h"
 
 #define AR71XX_BASE_FREQ	40000000
 #define AR724X_BASE_FREQ	40000000
@@ -87,37 +90,48 @@ static void __init ar71xx_clocks_init(void)
 	clk_add_alias("uart", NULL, "ahb", NULL);
 }
 
+static struct clk * __init ath79_reg_ffclk(const char *name,
+		const char *parent_name, unsigned int mult, unsigned int div)
+{
+	struct clk *clk;
+
+	clk = clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
+	if (!clk)
+		panic("failed to allocate %s clock structure", name);
+
+	return clk;
+}
+
+static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
+{
+	u32 pll;
+	u32 mult, div, ddr_div, ahb_div;
+
+	pll = __raw_readl(pll_base + AR724X_PLL_REG_CPU_CONFIG);
+
+	mult = ((pll >> AR724X_PLL_FB_SHIFT) & AR724X_PLL_FB_MASK);
+	div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK) * 2;
+
+	ddr_div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
+	ahb_div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
+
+	clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", mult, div);
+	clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", mult, div * ddr_div);
+	clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", mult, div * ahb_div);
+}
+
 static void __init ar724x_clocks_init(void)
 {
-	unsigned long ref_rate;
-	unsigned long cpu_rate;
-	unsigned long ddr_rate;
-	unsigned long ahb_rate;
-	u32 pll;
-	u32 freq;
-	u32 div;
+	struct clk *ref_clk;
 
-	ref_rate = AR724X_BASE_FREQ;
-	pll = ath79_pll_rr(AR724X_PLL_REG_CPU_CONFIG);
+	ref_clk = ath79_add_sys_clkdev("ref", AR724X_BASE_FREQ);
 
-	div = ((pll >> AR724X_PLL_FB_SHIFT) & AR724X_PLL_FB_MASK);
-	freq = div * ref_rate;
+	ar724x_clk_init(ref_clk, ath79_pll_base);
 
-	div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK) * 2;
-	freq /= div;
-
-	cpu_rate = freq;
-
-	div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
-	ddr_rate = freq / div;
-
-	div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
-	ahb_rate = cpu_rate / div;
-
-	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	/* just make happy plat_time_init() from arch/mips/ath79/setup.c */
+	clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
+	clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
+	clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
 
 	clk_add_alias("wdt", NULL, "ahb", NULL);
 	clk_add_alias("uart", NULL, "ahb", NULL);
@@ -420,8 +434,6 @@ void __init ath79_clocks_init(void)
 		qca955x_clocks_init();
 	else
 		BUG();
-
-	of_clk_init(NULL);
 }
 
 unsigned long __init
@@ -448,8 +460,42 @@ static void __init ath79_clocks_init_dt(struct device_node *np)
 
 CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt);
 CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt);
-CLK_OF_DECLARE(ar9130, "qca,ar9130-pll", ath79_clocks_init_dt);
 CLK_OF_DECLARE(ar9330, "qca,ar9330-pll", ath79_clocks_init_dt);
 CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt);
 CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt);
+
+static void __init ath79_clocks_init_dt_ng(struct device_node *np)
+{
+	struct clk *ref_clk;
+	void __iomem *pll_base;
+	const char *dnfn = of_node_full_name(np);
+
+	ref_clk = of_clk_get(np, 0);
+	if (IS_ERR(ref_clk)) {
+		pr_err("%s: of_clk_get failed\n", dnfn);
+		goto err;
+	}
+
+	pll_base = of_iomap(np, 0);
+	if (!pll_base) {
+		pr_err("%s: can't map pll registers\n", dnfn);
+		goto err_clk;
+	}
+
+	ar724x_clk_init(ref_clk, pll_base);
+
+	if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
+		pr_err("%s: could not register clk provider\n", dnfn);
+		goto err_clk;
+	}
+
+	return;
+
+err_clk:
+	clk_put(ref_clk);
+
+err:
+	return;
+}
+CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
 #endif
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 99ab4bb..61e3a59 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -17,6 +17,7 @@
 #include <linux/bootmem.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
 
@@ -221,6 +222,36 @@ void __init plat_mem_setup(void)
 	pm_power_off = ath79_halt;
 }
 
+static void __init ath79_of_plat_time_init(void)
+{
+	struct device_node *np;
+	struct clk *clk;
+	unsigned long cpu_clk_rate;
+
+	of_clk_init(NULL);
+
+	np = of_get_cpu_node(0, NULL);
+	if (!np) {
+		pr_err("Failed to get CPU node\n");
+		return;
+	}
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
+		return;
+	}
+
+	cpu_clk_rate = clk_get_rate(clk);
+
+	pr_info("CPU clock: %lu.%03lu MHz\n",
+		cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000);
+
+	mips_hpt_frequency = cpu_clk_rate / 2;
+
+	clk_put(clk);
+}
+
 void __init plat_time_init(void)
 {
 	unsigned long cpu_clk_rate;
@@ -228,6 +259,11 @@ void __init plat_time_init(void)
 	unsigned long ddr_clk_rate;
 	unsigned long ref_clk_rate;
 
+	if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) {
+		ath79_of_plat_time_init();
+		return;
+	}
+
 	ath79_clocks_init();
 
 	cpu_clk_rate = ath79_get_sys_clk_rate("cpu");
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index 2f9a3ee..302f0a8 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -13,6 +13,7 @@
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "mips,mips24Kc";
+			clocks = <&pll ATH79_CLK_CPU>;
 			reg = <0>;
 		};
 	};
-- 
2.7.0

[PATCH v2 11/18] MIPS: ath79: update devicetree clock support for AR9331

[Antony Pavlov]

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
---
 arch/mips/ath79/clock.c | 120 +++++++++++++++++++++++++++++-------------------
 1 file changed, 74 insertions(+), 46 deletions(-)

diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index 79fb8b4..3cfc5ec 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -137,15 +137,68 @@ static void __init ar724x_clocks_init(void)
 	clk_add_alias("uart", NULL, "ahb", NULL);
 }
 
+static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
+{
+	u32 clock_ctrl;
+	u32 ref_div;
+	u32 ninit_mul;
+	u32 out_div;
+
+	u32 cpu_div;
+	u32 ddr_div;
+	u32 ahb_div;
+
+	clock_ctrl = __raw_readl(pll_base + AR933X_PLL_CLOCK_CTRL_REG);
+	if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
+		ref_div = 1;
+		ninit_mul = 1;
+		out_div = 1;
+
+		cpu_div = 1;
+		ddr_div = 1;
+		ahb_div = 1;
+	} else {
+		u32 cpu_config;
+		u32 t;
+
+		cpu_config = __raw_readl(pll_base + AR933X_PLL_CPU_CONFIG_REG);
+
+		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+		    AR933X_PLL_CPU_CONFIG_REFDIV_MASK;
+		ref_div = t;
+
+		ninit_mul = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
+		    AR933X_PLL_CPU_CONFIG_NINT_MASK;
+
+		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+		    AR933X_PLL_CPU_CONFIG_OUTDIV_MASK;
+		if (t == 0)
+			t = 1;
+
+		out_div = (1 << t);
+
+		cpu_div = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) &
+		     AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1;
+
+		ddr_div = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) &
+		      AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1;
+
+		ahb_div = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) &
+		     AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
+	}
+
+	clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref",
+					ninit_mul, ref_div * out_div * cpu_div);
+	clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref",
+					ninit_mul, ref_div * out_div * ddr_div);
+	clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref",
+					ninit_mul, ref_div * out_div * ahb_div);
+}
+
 static void __init ar933x_clocks_init(void)
 {
+	struct clk *ref_clk;
 	unsigned long ref_rate;
-	unsigned long cpu_rate;
-	unsigned long ddr_rate;
-	unsigned long ahb_rate;
-	u32 clock_ctrl;
-	u32 cpu_config;
-	u32 freq;
 	u32 t;
 
 	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
@@ -154,46 +207,14 @@ static void __init ar933x_clocks_init(void)
 	else
 		ref_rate = (25 * 1000 * 1000);
 
-	clock_ctrl = ath79_pll_rr(AR933X_PLL_CLOCK_CTRL_REG);
-	if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
-		cpu_rate = ref_rate;
-		ahb_rate = ref_rate;
-		ddr_rate = ref_rate;
-	} else {
-		cpu_config = ath79_pll_rr(AR933X_PLL_CPU_CONFIG_REG);
+	ref_clk = ath79_add_sys_clkdev("ref", ref_rate);
 
-		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-		    AR933X_PLL_CPU_CONFIG_REFDIV_MASK;
-		freq = ref_rate / t;
+	ar9330_clk_init(ref_clk, ath79_pll_base);
 
-		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
-		    AR933X_PLL_CPU_CONFIG_NINT_MASK;
-		freq *= t;
-
-		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-		    AR933X_PLL_CPU_CONFIG_OUTDIV_MASK;
-		if (t == 0)
-			t = 1;
-
-		freq >>= t;
-
-		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) &
-		     AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1;
-		cpu_rate = freq / t;
-
-		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) &
-		      AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1;
-		ddr_rate = freq / t;
-
-		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) &
-		     AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
-		ahb_rate = freq / t;
-	}
-
-	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	/* just make happy plat_time_init() from arch/mips/ath79/setup.c */
+	clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
+	clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
+	clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
 
 	clk_add_alias("wdt", NULL, "ahb", NULL);
 	clk_add_alias("uart", NULL, "ref", NULL);
@@ -460,7 +481,6 @@ static void __init ath79_clocks_init_dt(struct device_node *np)
 
 CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt);
 CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt);
-CLK_OF_DECLARE(ar9330, "qca,ar9330-pll", ath79_clocks_init_dt);
 CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt);
 CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt);
 
@@ -482,7 +502,14 @@ static void __init ath79_clocks_init_dt_ng(struct device_node *np)
 		goto err_clk;
 	}
 
-	ar724x_clk_init(ref_clk, pll_base);
+	if (of_device_is_compatible(np, "qca,ar9130-pll"))
+		ar724x_clk_init(ref_clk, pll_base);
+	else if (of_device_is_compatible(np, "qca,ar9330-pll"))
+		ar9330_clk_init(ref_clk, pll_base);
+	else {
+		pr_err("%s: could not find any appropriate clk_init()\n", dnfn);
+		goto err_clk;
+	}
 
 	if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
 		pr_err("%s: could not register clk provider\n", dnfn);
@@ -498,4 +525,5 @@ err:
 	return;
 }
 CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
+CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
 #endif
-- 
2.7.0

[PATCH v2 01/18] dt-bindings: clock: qca,ath79-pll: fix copy-paste typos

[Antony Pavlov]

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

---
Changes since v1:
  * dt-bindings: clock: qca,ath79-pll: fix copy-paste

v1:
Acked-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Acked-by: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
---
 Documentation/devicetree/bindings/clock/qca,ath79-pll.txt | 6 +++---
 arch/mips/boot/dts/qca/ar9132.dtsi                        | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
index e0fc2c1..241fb05 100644
--- a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
+++ b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
@@ -3,7 +3,7 @@ Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller
 The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB.
 
 Required Properties:
-- compatible: has to be "qca,<soctype>-cpu-intc" and one of the following
+- compatible: has to be "qca,<soctype>-pll" and one of the following
   fallbacks:
   - "qca,ar7100-pll"
   - "qca,ar7240-pll"
@@ -21,8 +21,8 @@ Optional properties:
 
 Example:
 
-	memory-controller@18050000 {
-		compatible = "qca,ar9132-ppl", "qca,ar9130-pll";
+	pll-controller@18050000 {
+		compatible = "qca,ar9132-pll", "qca,ar9130-pll";
 		reg = <0x18050000 0x20>;
 
 		clock-names = "ref";
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index 3ad4ba9..3c2ed9e 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -83,7 +83,7 @@
 			};
 
 			pll: pll-controller@18050000 {
-				compatible = "qca,ar9132-ppl",
+				compatible = "qca,ar9132-pll",
 						"qca,ar9130-pll";
 				reg = <0x18050000 0x20>;
 
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 04/18] MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: drop unused alias node

[Antony Pavlov]

The TP-LINK TL-WR1043ND board has only one serial port,
so replacing the default of 0 with 0 does nothing useful.

Moreover, the correct name for aliases node is "aliases" not "alias".

An overview of the "aliases" node usage can be found
on the device tree usage page at devicetree.org [1].

Also please see chapter 3.3 ("Aliases node") of the ePAPR 1.1 [2].

[1] http://devicetree.org/Device_Tree_Usage#aliases_Node
[2] https://www.power.org/documentation/epapr-version-1-1/

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
index e535ee3..c3069c3 100644
--- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -9,10 +9,6 @@
 	compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
 	model = "TP-Link TL-WR1043ND Version 1";
 
-	alias {
-		serial0 = "/ahb/apb/uart@18020000";
-	};
-
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x2000000>;
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 05/18] MIPS: dts: qca: ar9132: use short references for dt nodes

[Antony Pavlov]

Here are some Sascha Hauer's arguments for using aliases in the dts
files:

 - using aliases reduces the number of indentations in dts files;

 - dts files become independent of the layout of the dtsi files
   (it becomes possible to introduce another bus {} hierarchy between
   a toplevel bus and the devices when you have to);

 - less chances for typos. if &i2c2 does not exist you get an error.
   If instead you duplicate the whole path in the dts file a typo
   in the path will just create another node.

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Frank Rowand <frowand.list-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/mips/boot/dts/qca/ar9132.dtsi               |  8 +-
 arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 94 ++++++++++++------------
 2 files changed, 49 insertions(+), 53 deletions(-)

diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index 3c2ed9e..3bff63b 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -52,7 +52,7 @@
 				#qca,ddr-wb-channel-cells = <1>;
 			};
 
-			uart@18020000 {
+			uart: uart@18020000 {
 				compatible = "ns8250";
 				reg = <0x18020000 0x20>;
 				interrupts = <3>;
@@ -94,7 +94,7 @@
 				clock-output-names = "cpu", "ddr", "ahb";
 			};
 
-			wdt@18060008 {
+			wdt: wdt@18060008 {
 				compatible = "qca,ar7130-wdt";
 				reg = <0x18060008 0x8>;
 
@@ -125,7 +125,7 @@
 			};
 		};
 
-		usb@1b000100 {
+		usb: usb@1b000100 {
 			compatible = "qca,ar7100-ehci", "generic-ehci";
 			reg = <0x1b000100 0x100>;
 
@@ -140,7 +140,7 @@
 			status = "disabled";
 		};
 
-		spi@1f000000 {
+		spi: spi@1f000000 {
 			compatible = "qca,ar9132-spi", "qca,ar7100-spi";
 			reg = <0x1f000000 0x10>;
 
diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
index c3069c3..eb632a2 100644
--- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -20,55 +20,6 @@
 		clock-frequency = <40000000>;
 	};
 
-	ahb {
-		apb {
-			uart@18020000 {
-				status = "okay";
-			};
-
-			pll-controller@18050000 {
-				clocks = <&extosc>;
-			};
-		};
-
-		usb@1b000100 {
-			status = "okay";
-		};
-
-		spi@1f000000 {
-			status = "okay";
-			num-cs = <1>;
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "s25sl064a";
-				reg = <0>;
-				spi-max-frequency = <25000000>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x000000 0x020000>;
-				};
-
-				partition@1 {
-					label = "firmware";
-					reg = <0x020000 0x7D0000>;
-				};
-
-				partition@2 {
-					label = "art";
-					reg = <0x7F0000 0x010000>;
-					read-only;
-				};
-			};
-		};
-	};
-
-	usb-phy {
-		status = "okay";
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -114,3 +65,48 @@
 		};
 	};
 };
+
+&uart {
+	status = "okay";
+};
+
+&pll {
+	clocks = <&extosc>;
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+	num-cs = <1>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "s25sl064a";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x000000 0x020000>;
+		};
+
+		partition@1 {
+			label = "firmware";
+			reg = <0x020000 0x7D0000>;
+		};
+
+		partition@2 {
+			label = "art";
+			reg = <0x7F0000 0x010000>;
+			read-only;
+		};
+	};
+};
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 10/18] MIPS: dts: qca: introduce AR9331 devicetree

[Antony Pavlov]

This patch introduces devicetree for Atheros AR9331 SoC (AKA Hornet).
The AR9331 chip is a Wi-Fi System-On-Chip (WiSOC),
typically used in very cheap Access Points and Routers.

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Cc: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/mips/boot/dts/qca/ar9331.dtsi | 155 +++++++++++++++++++++++++++++++++++++
 1 file changed, 155 insertions(+)

diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
new file mode 100644
index 0000000..cf47ed4
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -0,0 +1,155 @@
+#include <dt-bindings/clock/ath79-clk.h>
+
+/ {
+	compatible = "qca,ar9331";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips24Kc";
+			clocks = <&pll ATH79_CLK_CPU>;
+			reg = <0>;
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "qca,ar7100-cpu-intc";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		qca,ddr-wb-channel-interrupts = <2>, <3>;
+		qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
+	};
+
+	ref: ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		ranges;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+
+		apb {
+			compatible = "simple-bus";
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			interrupt-parent = <&miscintc>;
+
+			ddr_ctrl: memory-controller@18000000 {
+				compatible = "qca,ar7240-ddr-controller";
+				reg = <0x18000000 0x100>;
+
+				#qca,ddr-wb-channel-cells = <1>;
+			};
+
+			uart: uart@18020000 {
+				compatible = "qca,ar9330-uart";
+				reg = <0x18020000 0x14>;
+
+				interrupts = <3>;
+
+				clocks = <&ref>;
+				clock-names = "uart";
+
+				status = "disabled";
+			};
+
+			gpio: gpio@18040000 {
+				compatible = "qca,ar7100-gpio";
+				reg = <0x18040000 0x34>;
+				interrupts = <2>;
+
+				ngpios = <30>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				status = "disabled";
+			};
+
+			pll: pll-controller@18050000 {
+				compatible = "qca,ar9330-pll";
+				reg = <0x18050000 0x100>;
+
+				clocks = <&ref>;
+				clock-names = "ref";
+
+				#clock-cells = <1>;
+			};
+
+			miscintc: interrupt-controller@18060010 {
+				compatible = "qca,ar7240-misc-intc";
+				reg = <0x18060010 0x4>;
+
+				interrupt-parent = <&cpuintc>;
+				interrupts = <6>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			rst: reset-controller@1806001c {
+				compatible = "qca,ar7100-reset";
+				reg = <0x1806001c 0x4>;
+
+				#reset-cells = <1>;
+			};
+		};
+
+		usb: usb@1b000100 {
+			compatible = "chipidea,usb2";
+			reg = <0x1b000000 0x200>;
+
+			interrupts = <3>;
+			resets = <&rst 5>;
+
+			phy-names = "usb-phy";
+			phys = <&usb_phy>;
+
+			status = "disabled";
+		};
+
+		spi: spi@1f000000 {
+			compatible = "qca,ar7100-spi";
+			reg = <0x1f000000 0x10>;
+
+			clocks = <&pll ATH79_CLK_AHB>;
+			clock-names = "ahb";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
+
+	usb_phy: usb-phy {
+		compatible = "qca,ar7100-usb-phy";
+
+		reset-names = "usb-phy", "usb-suspend-override";
+		resets = <&rst 4>, <&rst 3>;
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+};
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 12/18] MIPS: ath79: add initial support for TP-LINK MR3020

[Antony Pavlov]

The following features are supported:

  * UART;
  * SPI-flash;
  * USB host;
  * GPIO keys and LEDs.

Links:

  * http://www.tp-link.com/en/products/details/?model=TL-MR3020
  * http://wiki.openwrt.org/toh/tp-link/tl-mr3020
  * https://wikidevi.com/wiki/TP-LINK_TL-MR3020

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Cc: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/mips/boot/dts/qca/Makefile             |   1 +
 arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts | 118 ++++++++++++++++++++++++++++
 2 files changed, 119 insertions(+)

diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
index 14bd225..5e2c20d 100644
--- a/arch/mips/boot/dts/qca/Makefile
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -1,5 +1,6 @@
 # All DTBs
 dtb-$(CONFIG_ATH79)			+= ar9132_tl_wr1043nd_v1.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_tl_mr3020.dtb
 
 # Force kbuild to make empty built-in.o if necessary
 obj-				+= dummy.o
diff --git a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
new file mode 100644
index 0000000..919cf3b
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
@@ -0,0 +1,118 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "TP-Link TL-MR3020";
+	compatible = "tplink,tl-mr3020";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			label = "tp-link:green:wlan";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		lan {
+			label = "tp-link:green:lan";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		wps {
+			label = "tp-link:green:wps";
+			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3g {
+			label = "tp-link:green:3g";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		button@1 {
+			label = "sw1";
+			linux,code = <BTN_0>;
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		button@2 {
+			label = "sw2";
+			linux,code = <BTN_1>;
+			gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_vbus: reg_usb_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Spansion S25FL032PIF SPI flash */
+	spiflash: s25sl032p@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25sl032p", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 13/18] devicetree: add Dragino vendor id

[Antony Pavlov]

Please see http://www.dragino.com/about/about.html for details.

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index dd72e05..bbce325 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -68,6 +68,7 @@ digilent	Diglent, Inc.
 dlg	Dialog Semiconductor
 dlink	D-Link Corporation
 dmo	Data Modul AG
+dragino	Dragino Technology Co., Limited
 ea	Embedded Artists AB
 ebv	EBV Elektronik
 edt	Emerging Display Technologies
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 14/18] MIPS: ath79: add initial support for Dragino MS14 (Dragino 2)

[Antony Pavlov]

The following features are supported:

  * UART;
  * SPI-flash;
  * USB host;
  * GPIO keys and LEDs.

Links:

    * http://www.dragino.com/products/mother-board/item/71-ms14-p.html
    * https://wiki.openwrt.org/toh/dragino/ms14

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Cc: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/mips/boot/dts/qca/Makefile                |   1 +
 arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts | 102 +++++++++++++++++++++++++
 2 files changed, 103 insertions(+)

diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
index 5e2c20d..2451364 100644
--- a/arch/mips/boot/dts/qca/Makefile
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -1,5 +1,6 @@
 # All DTBs
 dtb-$(CONFIG_ATH79)			+= ar9132_tl_wr1043nd_v1.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_dragino_ms14.dtb
 dtb-$(CONFIG_ATH79)			+= ar9331_tl_mr3020.dtb
 
 # Force kbuild to make empty built-in.o if necessary
diff --git a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
new file mode 100644
index 0000000..56f8320
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
@@ -0,0 +1,102 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "Dragino MS14 (Dragino 2)";
+	compatible = "dragino,ms14";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			label = "dragino2:red:wlan";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		lan {
+			label = "dragino2:red:lan";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		wan {
+			label = "dragino2:red:wan";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		system {
+			label = "dragino2:red:system";
+			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "jumpstart";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q128BVFG SPI flash */
+	spiflash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 15/18] devicetree: add Onion Corporation vendor id

[Antony Pavlov]

Please see https://onion.io/contact for details.

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index bbce325..f14451b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -167,6 +167,7 @@ nvidia	NVIDIA
 nxp	NXP Semiconductors
 okaya	Okaya Electric America, Inc.
 olimex	OLIMEX Ltd.
+onion	Onion Corporation
 onnn	ON Semiconductor Corp.
 opencores	OpenCores.org
 option	Option NV
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 16/18] MIPS: ath79: add initial support for Onion Omega

[Antony Pavlov]

The following features are supported:

  * UART;
  * SPI-flash;
  * USB host;
  * GPIO key and LED.

Please see https://onion.io/omega for details.

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Cc: Alban Bedel <albeu-GANU6spQydw@public.gmane.org>
Cc: L. D. Pinney <ldpinney-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Boken Lin <bl-Jj7zZGp/71Y@public.gmane.org>
Cc: Jacky Huang <huangfangcheng-9Onoh4P/yGk@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/mips/boot/dts/qca/Makefile         |  1 +
 arch/mips/boot/dts/qca/ar9331_omega.dts | 78 +++++++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+)

diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
index 2451364..dc0b5a4 100644
--- a/arch/mips/boot/dts/qca/Makefile
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -1,6 +1,7 @@
 # All DTBs
 dtb-$(CONFIG_ATH79)			+= ar9132_tl_wr1043nd_v1.dtb
 dtb-$(CONFIG_ATH79)			+= ar9331_dragino_ms14.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_omega.dtb
 dtb-$(CONFIG_ATH79)			+= ar9331_tl_mr3020.dtb
 
 # Force kbuild to make empty built-in.o if necessary
diff --git a/arch/mips/boot/dts/qca/ar9331_omega.dts b/arch/mips/boot/dts/qca/ar9331_omega.dts
new file mode 100644
index 0000000..b2be3b0
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_omega.dts
@@ -0,0 +1,78 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "Onion Omega";
+	compatible = "onion,omega";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "onion:amber:system";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q128FVSG SPI flash */
+	spiflash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 17/18] devicetree: add DPTechnics vendor id

[Antony Pavlov]

Please see https://www.dptechnics.com/contact for details.

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Daan Pape <daan-xfAQRCeQ3RHuufBYgWm87A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index f14451b..eb7cc2df 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -68,6 +68,7 @@ digilent	Diglent, Inc.
 dlg	Dialog Semiconductor
 dlink	D-Link Corporation
 dmo	Data Modul AG
+dptechnics	DPTechnics
 dragino	Dragino Technology Co., Limited
 ea	Embedded Artists AB
 ebv	EBV Elektronik
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 18/18] MIPS: ath79: add initial support for DPT-Module

[Antony Pavlov]

The following features are supported:

  * UART;
  * SPI-flash;
  * USB host;
  * GPIO key and LED.

Links:

  * https://dptechnics.com/shop/index.php?route=product/product&path=59&product_id=50
  * https://dptechnics.com/shop/index.php?route=product/product&path=59&product_id=63

Signed-off-by: Antony Pavlov <antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Daan Pape <daan-xfAQRCeQ3RHuufBYgWm87A@public.gmane.org>
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/mips/boot/dts/qca/Makefile              |  1 +
 arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 78 ++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+)

diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
index dc0b5a4..63a9ddf 100644
--- a/arch/mips/boot/dts/qca/Makefile
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -1,5 +1,6 @@
 # All DTBs
 dtb-$(CONFIG_ATH79)			+= ar9132_tl_wr1043nd_v1.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_dpt_module.dtb
 dtb-$(CONFIG_ATH79)			+= ar9331_dragino_ms14.dtb
 dtb-$(CONFIG_ATH79)			+= ar9331_omega.dtb
 dtb-$(CONFIG_ATH79)			+= ar9331_tl_mr3020.dtb
diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
new file mode 100644
index 0000000..98e7450
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
@@ -0,0 +1,78 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "DPTechnics DPT-Module";
+	compatible = "dptechnics,dpt-module";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "dpt-module:green:system";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q128FVSG SPI flash */
+	spiflash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html